QQ: 859818709

Raycus RFL-P20QE 20W Q-Switched Pulsed Fiber Laser

Raycus RFL-P20QE 20W Q-Switched Pulsed Fiber Laser

Price on request
Category:

Description

Product Overview

The Raycus RFL-P20QE is a 20 W Q-switched pulsed fiber laser independently developed and mass-produced by Wuhan Raycus Fiber Laser Technologies Co., Ltd. Part of the Raycus P-series Q-switched line, it uses acousto-optic Q-switching to deliver pulsed output with high peak power, high single-pulse energy and excellent beam quality. The QE suffix denotes the economy version, which optimises cost structure while preserving core performance and makes it an ideal entry-level choice for laser marking. The laser is widely used for marking, deep engraving and micromachining of stainless steel, carbon steel and alloys, as well as surface treatment of some non-metals, serving as the core light source of industrial laser markers and precision processing systems. Its all-fiber architecture ensures high reliability and maintenance-free operation over long periods; compared with traditional lamp-pumped or diode-pumped solid-state lasers it offers higher electro-optical conversion efficiency, a smaller footprint and a longer service life.

Key Features

  1. High peak-power pulsed output: acousto-optic Q-switching releases high energy density within nanosecond pulses, with peak power reaching the kilowatt level and single-pulse energy of 0.67 mJ at 20 W average power, enabling deep engraving and high-quality marking of metals with sharp, high-contrast lines.
  2. Excellent beam quality: beam quality factor M² < 1.5, close to the diffraction limit, ensures a small focal spot and concentrated energy for fine marking and micron-level processing, with character clarity far exceeding ordinary light sources.
  3. Highly stable output: power instability < 3% and minimal fluctuation during long continuous operation guarantee consistency and repeatability in batch processing, suitable for 24/7 production environments.
  4. Built-in optical isolator for high-reflection protection: the standard isolator prevents reflected light from returning into the laser when processing highly reflective materials (gold, silver, copper, aluminium, etc.), safeguarding stable operation in such applications.
  5. All-fiber maintenance-free design: an all-fiber integrated structure with no optical elements to adjust or clean; all internal optics are precision-packaged by fused taper technology, eliminating routine maintenance and reducing operating cost, with MTBF exceeding 100,000 hours.
  6. Intelligent cooling and compact structure: efficient air cooling with multiple fans at the rear keeps the laser stable at ambient temperatures of 0-40 °C; the module measures only 260 × 340 × 120 mm and can be embedded directly in various laser processing machines.
  7. Standard interface and easy control: industrial-standard DB25 control interface with external TTL signal control, 10-100% power adjustment and 24 VDC supply; compatible with mainstream marking control cards (e.g. JCZ, SamLight) for plug-and-play system integration.

Detailed Specifications

Optical Characteristics
Average output power ≥ 20 W
Central wavelength 1064 ± 5 nm
Repetition rate range 30-60 kHz
Power instability < 3%
Output Characteristics
Output beam diameter 7 ± 1 mm
Beam quality M² < 1.5
Pulse width 120-150 ns
Max. single-pulse energy 0.67 mJ
Polarisation Random
Delivery fiber length 3 m (customisable)
Optical isolator Standard
Electrical Characteristics
Input power supply 24 VDC
Power adjustment range 10-100%
Power consumption ≤ 170 W
Other Characteristics
Cooling method Air cooling
Dimensions (W × H × D) 260 × 340 × 120 mm
Operating temperature 0-40 °C
Storage temperature -20 to 60 °C
Storage humidity ≤ 80%

Operating Principle

The RFL-P20QE generates pulsed output by acousto-optic Q-switching. Pump light is absorbed by the dopant ions in an ytterbium-doped (Yb³⁺) fiber to create a population inversion. While the acousto-optic Q-switch is "closed", cavity loss is high, laser oscillation is suppressed and energy accumulates in the gain fiber. When the Q-switch opens rapidly, cavity loss drops sharply and the stored energy is released within an extremely short time as nanosecond pulses, producing high peak-power Q-switched output. Pulse width typically falls in the 120-150 ns range, determined jointly by cavity parameters and the Q-switch modulation rate. This mature and reliable technique provides stable pulse parameters and is the most widely used pulsed laser technology in industrial marking.

Typical Applications

  • Laser marking: high-contrast marking of stainless steel, carbon steel and alloy steel with clear, permanent marks that meet industrial traceability requirements
  • Deep engraving: high peak power enables deep engraving of metals for mould numbering, nameplate lettering and similar applications
  • Electronic component marking: the fine focal spot meets high-precision marking needs for electronic components, PCB boards, connectors and other small parts
  • Micromachining and cutting: micro-hole drilling and scribing of thin metal sheets and other precision processing
  • ITO film etching / resistor trimming: precise control of pulse energy for fine etching of thin films and resistor trimming

Selection Guide

As a 20 W class Q-switched pulsed laser, the RFL-P20QE suits low-to-medium power marking applications. If you mainly process conventional metals such as stainless steel and carbon steel and value cost performance, the P20QE economy version is the first choice; if installation space is tighter, the P20QS standard version is more compact; if positioning accuracy is critical, the P20QB with built-in red aiming beam is recommended. For higher-throughput batch production, consider 30 W and above. For special processes such as oxide colouring, choose an MX model from the MOPA series.

Q-Switched Series Comparison

Parameter P20QE P20QS P20QB P30Q P30QS P30QB P50QB P60QB P70Q P100QA
Power (W) 20 20 20 30 30 30 50 60 70 100
Repetition rate (kHz) 30-60 30-60 30-60 30-60 30-60 30-60 50-100 55-100 20-400 20-200
Pulse width (ns) 120-150 120-150 110-140 110-130 120-150 120-150 120-150 120-150 50-110 50-110
M² < 1.5 < 1.6 < 1.5 < 1.5 < 1.6 < 1.6 < 1.6 < 1.6 < 1.6 < 1.6
Single pulse (mJ) 0.67 0.66 0.66 1 0.75 1 1 1.09 1 1
Red aiming beam No No Built-in No No Built-in Built-in Built-in No No
Power consumption (W) 170 180 170 240 240 240 340 400 400 450
Reference price Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire Enquire

About the Brand

Wuhan Raycus Fiber Laser Technologies Co., Ltd. (Raycus) is a leading company in China’s fiber laser industry and the first domestic high-tech enterprise to independently develop and mass-produce fiber lasers. Founded in 2007 and listed on the Shenzhen Stock Exchange in 2018 (ticker 300747), it is headquartered in Optics Valley, Wuhan. Raycus owns the full supply chain of core technologies from pump sources and gain fibers to fiber Bragg gratings. Its pulsed fiber laser portfolio covers the 10-250 W Q-switched series and the 20-250 W MOPA series, widely used in marking, cutting, welding and cleaning. It holds a leading domestic market share and exports to more than 50 countries and regions.

Contact Us

For more product information, a quotation or technical advice, please contact Soar Laser:

  • Sales hotline: +86 159-2722-0467
  • Website: www.soar-laser.cn
  • Brand website: www.raycuslaser.com

We provide professional selection guidance, on-site technical support and comprehensive after-sales service to match the optimal laser solution for you.

Reviews

There are no reviews yet.

Be the first to review “Raycus RFL-P20QE 20W Q-Switched Pulsed Fiber Laser”

Your email address will not be published. Required fields are marked *

中文EN