Description
Product Overview
The D80E rotary fixture is a three-jaw chuck rotary axis designed for fiber laser marking machines, built around an 80 mm D80 chuck. It uses a high-grade cast iron three-jaw chuck with moderate hardness, stable clamping, accurate positioning, smooth rotation and low friction. The tilt angle is steplessly adjustable from 0° to 90° with manual locking, so the fixture adapts flexibly to the required working angle of different parts. An industrial standard aviation connector makes it plug-and-play with most fiber laser marking machine control cards. A stepper motor and driver come as standard, and timing-belt transmission keeps operation smooth and quiet. It is an ideal rotary accessory for cylindrical laser marking, welding and cutting.
Key Features
-
🔩 Premium cast iron three-jaw chuck
A high-grade cast iron three-jaw self-centering chuck with moderate hardness, uniform clamping force and high positioning accuracy. The three jaws move in synchronism so the workpiece centers itself without jaw-by-jaw adjustment, greatly improving setup efficiency. The chuck surface is precision machined for smooth rotation, low friction and long wear life. -
📐 Stepless multi-angle adjustment
The tilt angle is steplessly adjustable from 0° to 90° and locks firmly by hand. 0° is horizontal and 90° is vertical, and any intermediate angle can be set. This flexibility covers cups, tubes, ring-shaped parts and other workpiece geometries with one fixture. -
🔌 Industrial standard aviation connector
The industrial standard aviation connector is directly compatible with most fiber laser marking and engraving machine control cards. Plug-and-play with no extra modification or wiring, which shortens system integration time and cost. -
⚙️ Stepper motor with timing-belt drive
Fitted with a 42×40 mm stepper motor and a DM420 driver; the timing belt provides a 2.5:1 reduction for high torque and smooth rotation. Belt drive keeps noise and vibration low, so marking accuracy stays consistent throughout the rotation. The Ø16 mm through bore lets long shafts pass through the fixture. -
🔧 Easy installation
Mounting holes on an 80 × 50 mm pattern (M5) let the fixture bolt directly onto the laser machine worktable. The 85 mm center height works with a lifting table for precise focus positioning. The E-series standard design uses a three-jaw self-centering chuck with high positioning accuracy for standard cylindrical workpieces.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | D80E rotary fixture |
| Chuck specification | D80 mm three-jaw self-centering chuck |
| Clamping range A (external jaws) | 2 – 22 mm |
| Clamping range B (internal expansion) | 25 – 70 mm |
| Clamping range C (reverse jaws) | 22 – 63 mm |
| Tilt angle adjustment | 0° – 90° |
| Motor | 42×40 mm stepper motor |
| Driver | DM420 driver |
| Transmission | Timing belt, 2.5:1 reduction |
| Through-bore diameter | Ø16 mm |
| Center height | 85 mm |
| Dimensions | 190 × 100 × 150 mm |
| Mounting hole pattern | 80 × 50 mm (M5) |
| Weight | 4.6 kg |
| Interface | Industrial standard aviation connector |
Technical Notes
The stepper motor turns the three-jaw chuck, and the rotation is coordinated with the galvo motion of the marking machine to mark the full 360° circumference of cylindrical workpieces. During operation the galvo scans along the X axis while the rotary fixture indexes in the rotation direction, and together they cover the whole cylindrical surface. The chuck offers three clamping modes – external jaws (A), internal expansion (B) and reverse jaws (C) – for workpieces of different shapes and sizes. The 2.5:1 belt reduction delivers ample torque together with fine angular resolution for consistent marking quality. During installation, keep the rotary axis perpendicular to the laser beam and match the center height to the focal plane.
Applications
- Laser marking on the cylindrical surface of stainless steel vacuum cups
- Laser engraving of rings, bracelets and other jewelry
- Laser lettering on pen barrels and tubular parts
- Laser marking of bearing inner and outer rings
- Rotary positioning for laser welding of valves and flange fittings
Selection Guide
When choosing a rotary fixture, first confirm the maximum workpiece diameter – the chuck must be larger than the workpiece. D69 suits small parts (rings, pen barrels), D80 suits medium parts (vacuum cups, small tubes), and D100/D125 suit large parts (large-diameter tube, bearings). The E version is the standard type, the F version is the reinforced type with higher torque, the C version is compact, and the low-profile version fits machines with limited Z-axis space. Roller-type fixtures handle long, slender parts that cannot be held in a chuck. Confirm the driver interface compatibility of your control card before ordering.
Series Comparison
| Model | Chuck diameter | Clamping range (external) | Tilt angle | Weight |
|---|---|---|---|---|
| D69E | Ø69 mm | 1 – 20 mm | 0° – 90° | 3.2 kg |
| D80E | Ø80 mm | 2 – 22 mm | 0° – 90° | 4.6 kg |
| D100E | Ø100 mm | 2 – 30 mm | 0° – 90° | 7.0 kg |
| D125E | Ø125 mm | 2.5 – 40 mm | 0° – 90° | 9.5 kg |
About the Brand
Changsha Soar Laser Equipment Co., Ltd. specializes in the development and manufacture of laser processing machine accessories, focusing on rotary fixtures, optical tables and laser components. Its products are known for high precision, high stability and excellent value for money, and are widely used to upgrade fiber laser marking machines, laser welding machines and similar equipment. Soar Laser is trusted by laser equipment manufacturers and end users in China and around the world.
Contact Us
For more product information or a quotation, please contact our technical sales team:
📞 Hotline: +86 159-2722-0467
We provide professional selection support, volume purchase discounts and comprehensive after-sales service.









Reviews
There are no reviews yet.