Description
Au3Tech SC2000E Laser Cutting Bus Control System
1. Product Overview
The SC2000E is an EtherCAT bus control system dedicated to 3-15 kW fiber laser cutting machines, launched by Wuhan Au3Tech Intelligent Electronic Control Technology Co., Ltd. and built around the AMC2416 bus motion control card as its core controller. Based on EtherCAT industrial Ethernet bus technology, the system achieves tight integration of motion control, laser source control and cutting gas control, with 0.01 mm path accuracy, 0.002 mm repeat positioning accuracy, up to 2G acceleration and unlimited cutting and rapid-traverse speeds. It ships with CypCutE cutting software that supports advanced functions such as seamless micro-joints, seamless piercing, one-stroke flying cut, disc center finding and one-key cut-off, and it works with a wireless handheld box for convenient operation. It is an ideal CNC solution for 3-15 kW medium and high power fiber laser cutting machines.
2. Key Features
- EtherCAT bus technology: built on industrial Ethernet bus, high-precision synchronized control with extremely fast response
- 3-15 kW power coverage: suited to fiber laser cutting machines across the full 3 kW to 15 kW range
- Very high machining accuracy: path accuracy 0.01 mm, positioning accuracy 0.001 mm, repeat positioning 0.002 mm
- High acceleration: up to 2G acceleration, unlimited cutting speed and rapid-traverse speed
- Rich I/O interfaces: 24 general outputs, 27 general inputs, 2 DA analog outputs, 2 PWM outputs
- Capacitive height controller port: built-in capacitive signal input (M16-4 aviation connector) for direct connection to FTC series height controllers
- Multi-laser compatibility: supports RS232, Ethernet and I/O control of mainstream laser sources such as Raycus, IPG and TRUMPF
- CypCutE professional software: built-in nesting, with advanced functions including seamless micro-joints, seamless piercing and flying cut
3. Technical Specifications
| Parameter | Specification |
|---|
4. Operating Principle
The SC2000E uses an EtherCAT master plus slave architecture. The AMC2416 master card is installed in a PCIe slot of the industrial PC and runs the EtherCAT master protocol stack, communicating in real time with the servo drive slaves of each axis over Gigabit Ethernet (cycle time no more than 1 ms). The master card also outputs laser control signals (PWM/DA/RS232/Ethernet) to control laser power and on/off switching, drives peripherals such as the assist gas solenoid valves and the lubrication system through the I/O terminal board, and receives height signals from the FTC height controller through the capacitive sensor interface for automatic Z-axis following. CypCutE software runs on the industrial PC and handles graphics import, nesting, path planning and process parameter setup, then sends the machining commands down to the AMC2416 for execution.
5. Applications
- Medium-thick carbon steel cutting – 3-15 kW laser cutting of 6-40 mm carbon steel plate
- Precision stainless steel cutting – bright-cut edges on thin and medium-thick stainless steel
- Aluminum alloy cutting – stable cutting of highly reflective materials with a dedicated anti-reflection setup
- Sheet metal fabrication – precision cutting of cookware, lighting fixtures, cabinets and similar sheet metal parts
- Tube cutting – intersecting-line tube cutting with a rotary axis
- Large-format sheet processing – cutting machines with standard formats from 1.5 m x 3 m to 6 m x 2.5 m
- Pallet-changer cutting – dual tables alternating loading and unloading to raise throughput
6. Selection Guide
The SC2000E suits 3-15 kW medium and high power fiber laser cutting machines. For 1-4 kW low power cutting, choose the FSCUT2000E. For 6-15 kW with advanced functions such as 9-level piercing, choose the FSCUT6000. Above 8 kW, choose the FSCUT8000C/8000A+. Best results are obtained with the FTC10/FTC10S height controller and BLT series cutting heads.
7. Series Comparison Table
| System Model | Applicable Power | Bus Type | Piercing Levels | Automatic Retrace | Smart Piercing |
|---|---|---|---|---|---|
| FSCUT2000E | 1-4kW | EtherCAT | 3 levels | Not supported | Not supported |
| SC2000E | 3-15kW | EtherCAT | 3 levels | Not supported | Not supported |
| FSCUT6000 | 6-15kW | EtherCAT | 5 levels | Not supported | Not supported |
| FSCUT8000C | 8-100kW | EtherCAT | 9 levels | Supported | Supported |
8. About the Brand
Wuhan Au3Tech Intelligent Electronic Control Technology Co., Ltd. (AU3TECH) is a high-tech company specializing in the development of CNC systems for laser processing, headquartered in Wuhan. The company focuses on the R&D and production of laser cutting control systems and capacitive height controllers, with a product line that includes the FTC series capacitive height controllers and the SC series laser cutting control systems, earning broad market recognition for cost effectiveness and reliable quality. Au3Tech works closely with Friendess Electronics (Shanghai) to provide complete cutting solutions based on the FSCUT platform.
9. Contact Us
For more product information, technical datasheets or selection advice, please contact us:
📞 Hotline: +86 159-2722-0467 (also on WeChat)
Changsha Soar Laser Equipment Co., Ltd. – authorized Au3Tech distributor, genuine factory products, quality assured. Website: www.soar-laser.cn









Reviews
There are no reviews yet.