QQ: 859818709

LINOS 4401-496-000-26 F-Theta Lens, 532 nm, f=255 mm, 183 x 183 mm

LINOS 4401-496-000-26 F-Theta Lens, 532 nm, f=255 mm, 183 x 183 mm

$7,212.00
SKU: LAS-56333234-EN
Category:

Description

Product Overview

The LINOS 4401-496-000-26 is a green-band F-Theta field lens from the F-Theta-Ronar series of Excelitas Technologies (Qioptiq, Germany). Design wavelength 532 nm, effective focal length 255.0 mm, fused silica lens body, scan field 183 x 183 mm, focused spot diameter about 25 μm with a 10.0 mm input beam, and total transmittance over the working band > 96%. It is a core scanning objective for laser marking, welding and precision micromachining systems.

Key Features

  • Optimized for the green band: design wavelength 532 nm, total transmittance over the working band > 96%.
  • High damage threshold coating: coating LIDT 20 J/cm², withstanding high power over long operating hours.
  • Fused silica lens body: low thermal expansion and low absorption suppress thermal lensing; the low absorption coating further reduces coating heating.
  • Suitable for ultrashort pulses: group delay dispersion (GDD) of only 3294 fs², so picosecond and femtosecond laser processing suffers no pulse broadening.
  • Replaceable protective window as standard: protective window PG 4401-496-005-01 blocks dust and spatter, protects the internal lenses and keeps maintenance cost low.

Technical Specifications

Parameter Specification
Model 4401-496-000-26
Type LINOS F-Theta-Ronar F-Theta field lens (low absorption)
Brand LINOS / Excelitas Technologies (Qioptiq, Germany)
Design Wavelength 532 nm
Effective Focal Length (EFL) 255.0 mm
Back Focal Length (BFL) 321.0 mm
Working Distance (WD) 318.1 mm
Flange Focal Length (FFL) 365.2 mm
Max. Input Beam Diameter (1/e²) 10.0 mm
Recommended Galvo Spacing m1 13.0 mm
Recommended Galvo Spacing m2 25.0 mm
Recommended Galvo Spacing m2 (mechanical) 16.8 mm
Scan Angle ±θ 20.9°
Scan Field 183 x 183 mm
Focused Spot Diameter 25 μm
Max. Telecentric Error 15.2°
Total Transmittance (Working Band) > 96%
Group Delay Dispersion (GDD) 3294 fs²
Coating LIDT 20 J/cm²
Back-Reflection Focal Positions (from first surface) 4.1; 5.8; 22.9; 45.0; 72.5; 73.1 mm
Weight 990 g
Protective Window Model 4401-496-005-01

Applications

  • Laser marking and engraving: a 183 x 183 mm field with an approximately 25 μm spot gives crisp edges on metal, plastic and coated surfaces, with high fidelity for small characters and 2D codes.
  • Precision laser welding: effective focal length 255.0 mm with moderate depth of focus; with a galvo scanner it welds battery housings and precision hardware with consistent seams.
  • Cutting and drilling: combined with high peak power lasers it supports high speed cutting of thin sheet and precision cutting.
  • Micromachining and research: with GDD of 3294 fs², ultrafast micromachining pulses are not broadened and spot energy stays concentrated.

Installation and selection notes: field lens performance depends on correct installation. First enter the recommended galvo spacings m1 = 13.0 mm and m2 = 25.0 mm into the scan head software, then set the distance from the field lens reference plane to the workpiece according to the flange focal length FFL of 365.2 mm, and finally fine-tune the Z axis for the smallest spot before production. Keep the protective window PG 4401-496-005-01 in place and check it regularly for contamination, since contamination directly degrades the spot energy distribution. For other field sizes, scale the selection to other focal lengths in the same series (this model, f = 255 mm, covers a 183 x 183 mm field).

FAQ

Which laser source suits the 4401-496-000-26?

It is designed for a 532 nm wavelength (see the specification table for the working band) and suits nanosecond, picosecond and femtosecond industrial lasers in that band. The coating damage threshold is 20 J/cm²; please confirm against your pulse width and power when selecting.

What scan field and spot size does the 4401-496-000-26 offer?

With a 10.0 mm input beam the scan field is 183 x 183 mm (scan angle ± 20.9°) and the focused spot diameter is about 25 μm. A larger entrance pupil or a different focal length in the series gives a different field and spot combination.

Which applications suit a non-telecentric F-Theta field lens?

Non-telecentric models are more compact and lower in cost, with uniform imaging across the 183 x 183 mm field, making them well suited to routine laser marking and engraving. For perpendicular incidence (drilling, deep engraving) choose a telecentric model from the same series.

Reviews

There are no reviews yet.

Be the first to review “LINOS 4401-496-000-26 F-Theta Lens, 532 nm, f=255 mm, 183 x 183 mm”

Your email address will not be published. Required fields are marked *

中文EN