QQ: 859818709

BC Variable Beam Expander for 355/532/1064 nm Lasers, Continuously Adjustable Magnification

BC Variable Beam Expander for 355/532/1064 nm Lasers, Continuously Adjustable Magnification

Price on request
SKU: LAS-79396371-EN
Category:

Description

Product Overview

The BC variable beam expander changes magnification continuously by adjusting the spacing of the internal lens groups, covering the 355/532/1064 nm solid-state laser bands. A single device can be switched between several magnification settings, which makes it convenient for matching the beam entering a scan head, adjusting the focused spot and running process trials; it suits both machine commissioning and laboratory beam paths. The adjustment mechanism has a locking feature, so the parameters stay stable once set.

Key Features

  • Continuously variable magnification: one unit covers several magnification settings and reduces the number of spare parts
  • Three wavelength bands: 355/532/1064 nm coatings selected as required
  • Flexible scan head matching: adjust the beam entering the galvo to optimize the marking line width
  • Reliable locking: locks after adjustment, so the parameters do not drift
  • Ideal for commissioning and trials: suits machine process tuning and laboratory beam paths alike

Technical Specifications

Type Variable beam expander
Wavelength 355/532/1064 nm
Magnification Continuously variable
Adjustment Lens spacing adjustment with locking
Design Galilean

Applications

Spot matching for galvo laser marking and welding, laser machine commissioning and laboratory beam path setup. The same unit also suits comparable processing tasks in similar conditions; custom versions and volume solutions can be discussed, and drawings or process requirements can be provided for a detailed evaluation.

Selection Guide

  • A beam expander has an input end and an output end. Install it in the beam path following the markings on the barrel; mounting it backwards causes abnormal divergence and a distorted spot.
  • Choose the magnification to suit the beam path: low magnification for a small near-field spot, higher magnification when a larger collimated aperture is needed in the far field. If you are unsure, send us the laser wavelength, spot size and field size and we will help with the calculation.
  • Models in the same series differ in power handling, clear aperture, interfaces and function modules. For volume purchase or production line matching, samples and a solution evaluation can be requested.
  • This is genuine factory stock, supplied with a packing list and warranty document; warranty and spare parts support are provided from the date of receipt as agreed, excluding consumables such as lenses and seals.
  • This model is the BC variable beam expander for 355/532/1064 nm; key specifications are in the table below. If you need higher power, a larger aperture or a different interface or focal length version, contact us for a series comparison and quotation.

Usage Precautions

  • Never look into the beam or specular reflections while the laser is running. Mark the work area with warning signs and guarding, and wear protective goggles matched to the wavelength.
  • Use purified or deionized water in the water cooling circuit and replace it regularly. If a water temperature or flow alarm occurs, stop the machine and find the cause before restarting.
  • Electrical wiring and servicing must be carried out by a licensed electrician with the power off and a lockout tag fitted. The equipment must be reliably earthed to prevent electric shock and interference.
  • Protect the equipment from moisture and dust during transport and storage. Before long-term shutdown, drain the water circuit, disconnect the power and cover the unit against dust.
  • Clean lenses with a clean-room swab and dedicated lens cleaner, wiping gently in a single direction to avoid scratching the coating. Do not dismantle the barrel threads yourself.
  • On arrival, check the model nameplate and the accessory list first. If you meet any problem during installation or commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

Variable or fixed magnification – which should I choose?
Choose variable magnification when you need to adjust the spot in place or use one unit for several jobs; choose fixed magnification for series machines where consistency matters.

Does adjusting the magnification affect the optical axis?
On a qualified product the axis shift during adjustment is very small; simply lock the setting after adjustment. A far-field check is recommended once the unit is installed.

Can it be used in the CO₂ band?
This model has solid-state band coatings; for the CO₂ band please choose the corresponding 9.3/10.6 μm model.

Disclaimer

The parameters on this page are compiled from the manufacturer’s public material and existing documents and are for selection reference only. Specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with batch, so please confirm with our support team before ordering. Reproduction of the content of this page without written permission is prohibited.

Selection advice: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “BC Variable Beam Expander for 355/532/1064 nm Lasers, Continuously Adjustable Magnification”

Your email address will not be published. Required fields are marked *

中文EN