QQ: 859818709

LINOS 4401-599-000-26 Telecentric F-Theta Lens, 532nm, f=75mm, 27x27mm

LINOS 4401-599-000-26 Telecentric F-Theta Lens, 532nm, f=75mm, 27x27mm

$7,672.00
SKU: LAS-45421469-EN
Category:

Description

Product Overview

One of the first choices for green-wavelength telecentric F-Theta scan lenses: the LINOS 4401-599-000-26 from the F-Theta-Ronar product line of Excelitas Technologies (Qioptiq, Germany). Design wavelength 532 nm, focal length 75.0 mm, fused silica body, spot diameter about 7 μm over a 27×27 mm scan field, transmission > 96, delivering stable and consistent focusing for laser marking, engraving and micro-processing.

Key Features

  • Telecentric optical design: The chief ray strikes the workpiece perpendicular to the surface across the whole field, so hole sidewalls have no taper and edge and center processing are identical, making it ideal for deep engraving, precision cutting and drilling.
  • Optimized for the green band: Design wavelength 532 nm, total transmission in the working band > 96.
  • High damage threshold coating: Coating LIDT 20 J/cm², withstanding high power over long operating periods.
  • Fused silica body: Low thermal expansion and low absorption suppress thermal lensing; the low absorption coating further reduces coating heating.
  • Suited to ultrashort pulses: Group delay dispersion GDD is only 3257 fs², so picosecond and femtosecond pulses are processed without pulse broadening concerns.
  • Replaceable protective window as standard: Protective window PG 4401-599-006-00 isolates dust and spatter, protects the internal optics and keeps maintenance cost low.

Technical Specifications

Parameter Specification
Model 4401-599-000-26
Type LINOS F-Theta-Ronar telecentric F-Theta field lens (low absorption)
Brand LINOS / Excelitas Technologies (Qioptiq, Germany)
Design Wavelength 532 nm
Effective Focal Length EFL 75.0 mm
Back Focal Length BFL 94.1 mm
Working Distance WD 85.8 mm
Flange Focal Distance FFL 147.3 mm
Max Input Beam Diameter (1/e²) 10.0 mm
Recommended Galvo Spacing m1 13.0 mm
Recommended Galvo Spacing m2 23.5 mm
Recommended Galvo Spacing m2 (mechanical) 19.4 mm
Scan Angle ±θ 10.6 °
Scan Field 27 x 27 mm
Focused Spot Diameter 7 μm
Max Telecentric Error 1.3 °
Total Transmission in Working Band > 96
Group Delay Dispersion GDD 3257 fs²
Coating LIDT 20 J/cm²
Back-Reflection Focus Positions (from first surface) 2.53 ; 2.72; 31.42 mm
Weight 923 g
Protective Window Model 4401-599-006-00

Applications

  • Micro-processing and research: With GDD of 3257 fs², ultrafast micro-processing pulses do not broaden and spot energy stays concentrated.
  • Cutting and drilling: The telecentric design leaves deep hole sidewalls almost taper-free and keeps cut edges vertical in thick material.
  • Precision laser welding: Effective focal length 75.0 mm gives a moderate depth of focus; with a galvo scanner it welds battery cases and precision hardware with consistent seams.
  • Laser marking and engraving: A 27×27 mm field with a spot of about 7 μm produces clean edges on metal, plastic and coatings, with high fidelity for small characters and 2D codes.

Installation and selection notes: lens performance depends on correct installation. First enter the recommended galvo spacings m1=13.0 mm and m2=23.5 mm into the scan head software, then set the distance from the lens reference plane to the workpiece according to the flange focal distance FFL of 147.3 mm, and finally fine-tune the Z axis for the smallest spot before production. Keep the protective window PG 4401-599-006-00 in place and check it regularly for contamination, since contamination directly degrades the spot energy distribution. If you need another field size, select from other focal lengths in the same series in proportion (this model, f=75 mm, corresponds to a 27×27 mm field).

FAQ

What is the mounting interface of the 4401-599-000-26?

This model has a flange focal distance FFL of 147.3 mm and connects to mainstream galvo scan heads through a mounting thread. The recommended galvo spacings are m1=13.0 mm and m2=23.5 mm; provide these two dimensions to the scan head supplier when selecting.

Which industries use the 4401-599-000-26?

Typical applications include green laser marking, laser engraving, precision laser welding and micro-processing of wafers, glass and thin films. The telecentric design is especially suited to deep hole processing and processes sensitive to perpendicularity.

How does the 4401-599-000-26 perform with ultrashort pulses?

Group delay dispersion GDD is 3257 fs², so picosecond and femtosecond pulses pass through with almost no broadening; together with the low absorption body, focus drift stays small during long high-power operation.

Reviews

There are no reviews yet.

Be the first to review “LINOS 4401-599-000-26 Telecentric F-Theta Lens, 532nm, f=75mm, 27x27mm”

Your email address will not be published. Required fields are marked *

中文EN