QQ: 859818709

Soar Laser QBH Collimator Module, Fiber Laser Collimation Assembly, Adjustable Optical Axis

Soar Laser QBH Collimator Module, Fiber Laser Collimation Assembly, Adjustable Optical Axis

Price on request
SKU: LAS-21285985-EN
Category:

Description

Product Overview

The QBH collimator module is mounted after the QBH output head of a fiber laser and collimates the small-core output beam into a parallel beam for downstream beam expansion, galvo scanning or processing heads. The assembly consists of a lens barrel, a collimation lens and an adjustment mechanism, and the optical axis is designed coaxial with the QBH interface, so only a fine adjustment is needed after installation before locking. It is the front-end core component of the beam path in marking machines, welding machines and cleaning machines.

Key Features

  • QBH interface: connects directly to the QBH output head of mainstream fiber lasers
  • Collimated output: delivers a parallel beam for the downstream beam path
  • Supplied as a complete assembly: lens barrel, lens and adjustment mechanism integrated in one unit
  • Adjustable optical axis: reserved fine adjustment freedom makes alignment easy during installation
  • Multiple power options: the lens is selected according to laser power and fiber core diameter

Technical Specifications

Type QBH collimator module (fiber laser collimation module)
Interface QBH
Composition Lens barrel, collimation lens, adjustment mechanism
Function Collimation of the laser output beam
Application Front-end beam path of marking, welding and cleaning machines

Applications

Assembly and repair of fiber laser marking machines, welding machines and cleaning machines. The module also suits similar processing requirements under comparable working conditions; non-standard customization and volume solutions can be discussed, and drawings or process requirements can be provided for a detailed evaluation.

Selection Guide

  • The mounting surface of the lens holder must be clean and flat. When adjusting, loosen the locking screw first, then fine-tune, and lock it afterwards; never force it, as this can stress and damage the lens.
  • Confirm the angle of incidence and orientation of mirrors and beam splitters against the beam path drawing; the spot should fall completely inside the effective aperture of the optic to avoid clipping at the edge.
  • Models in the same series differ in power, clear aperture, interface and functional modules. For volume purchases or production line integration, samples and a solution evaluation can be requested.
  • This is genuine original stock, shipped with a packing list and warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed, excluding consumable items such as lenses and seals.
  • This item is the QBH collimator module (fiber laser collimation module); key specifications are listed in the parameter table below. For higher power, larger aperture or a different interface or focal length, contact customer service for a series comparison and quotation.

Notes for Use

  • Never look directly into the beam or its specular reflections while the laser is running. Post warning signs and protective screens around the working area, and wear safety goggles matched to the wavelength.
  • Use purified or deionized water in the water cooling system and replace it regularly. If the water temperature or flow alarm is triggered, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with the power locked out and tagged out before work. The equipment must be reliably grounded to prevent leakage and interference.
  • Protect the equipment from moisture and dust during transport and storage. Before long periods of disuse, drain the water circuit, disconnect the power and cover the unit against dust.
  • The adjustment mechanism is a precision part; avoid impacts and drops. Clamp the lens with even force and lock it before starting the process.
  • On receipt, check the model nameplate and the accessory list first. If you meet any problem during installation or commissioning, contact Changsha Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

How do I choose the collimation focal length?
It depends on the fiber core diameter and the downstream aperture; 75 mm and 100 mm are common options. Provide the laser model and downstream device parameters and we will recommend a suitable version.

Can the lens be replaced?
Yes, the collimation lens can be replaced to match a different wavelength and power; the optical axis must be realigned after replacement.

What should I do if the spot is not round after installation?
Check that the QBH mating face is clean and fully locked, then fine-tune the optical axis of the module. If necessary, return the unit for re-alignment at the factory.

Disclaimer

The parameters on this page are compiled from the manufacturer’s public information and existing documents and are provided for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet. Appearance and configuration may change with production batches, so please confirm with customer service before ordering. Reproduction of the content of this page without written permission is prohibited.

Selection consultation: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “Soar Laser QBH Collimator Module, Fiber Laser Collimation Assembly, Adjustable Optical Axis”

Your email address will not be published. Required fields are marked *

中文EN