Description
Product Overview
The MCC3721NC is an Au3Tech motion control card for dedicated laser machines. It is responsible for multi-axis interpolation of the complete machine and for coordinated output of laser power and process signals. The board integrates commonly used I/O resources and works with the host PC software to perform graphics processing, interpolation and height-following interlocking, supporting the motion control requirements of cutting, welding and cleaning machines. It is a proven board-level solution for OEM integration by machine builders.
Key Features
- Multi-axis interpolation: supports multi-axis interpolation and coordinated motion control
- Laser process integration: power modulation, shutter and height-following signals coordinated in one place
- Rich I/O resources: on-board inputs and outputs cover interlocking and auxiliary control
- OEM-friendly: works with the host PC software to form a complete control solution
- One card for cutting, welding and cleaning: a single board adapts to several types of dedicated laser machines
Technical Specifications
| Brand | Au3Tech |
| Model | MCC3721NC |
| Type | Laser motion control card |
| Controlled axes | Multi-axis (configured by software) |
| Process support | Cutting / welding / cleaning |
| Form factor | Board-level (plug-in card) |
Applications
OEM control package for complete laser cutting, welding and cleaning machines. The same card also suits similar machining requirements; non-standard customization and volume solutions are available, and we can provide a detailed evaluation on receipt of your drawings or process requirements.
Selection Guide
- When selecting a height controller or control card, check the cutting head interface type and the laser power class first: analog and pulsed versions use different signals, so please provide the cutting head model for verification before ordering.
- Height following must be calibrated after installation, and the calibration height is set according to the nozzle type and sheet combination; we recommend re-checking once after changing the sheet batch or the nozzle.
- Models in the same series differ in power, clear aperture, interface and function modules; for volume purchase or production line integration you may request a sample for trial and a solution evaluation.
- This item is genuine original factory stock and ships with a packing list and warranty certificate; warranty and spare part support are provided from the date of receipt as agreed, excluding wearable consumables such as lenses and seals.
- This is the Au3Tech MCC3721NC laser motion control card; key specifications are listed in the parameter table above. For higher power, larger aperture or different interface and focal length versions, contact us for a series comparison and quotation.
Usage Precautions
- Never look directly into the beam or specular reflections while the laser equipment is running; post warning signs and protective barriers around the working area and wear protective goggles matched to the wavelength.
- Use purified or deionized water in the water cooling system and replace it regularly; when water temperature or flow alarms occur, stop the machine and troubleshoot before restarting.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out before work; the equipment must be reliably grounded to prevent leakage and interference.
- Protect the equipment from moisture and dust during transport and storage; before long-term shutdown, drain the water circuit, disconnect the power and cover the machine against dust.
- Route signal and encoder cables away from power cables and ground the shield at one end only; record the parameters after calibration for future reference.
- On receipt, check the model nameplate and the accessory packing list first. If you meet problems during installation or commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Which software does the MCC3721NC use?
It works with the matching Au3Tech host PC software; the specific version and license are supplied with the board, and you are welcome to call us to confirm.
Does it support height following?
Yes. It works with the FTC series capacitive height controllers to achieve height following for piercing and cutting.
Can it replace control cards from other brands?
The machine axis count, I/O and software flow need to be evaluated; we recommend sending your current system configuration so that we can assess the adaptation.
Disclaimer
The parameters on this page are compiled from the manufacturer public information and existing documentation and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer latest datasheet; appearance and configuration may be updated with production batches, so please confirm with us before ordering. Reproduction of the content of this page without written permission is prohibited.
Selection consulting: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.