QQ: 859818709

Raycus RFL-P60QB 60 W Q-Switched Pulsed Fiber Laser with Red Beam Pointer

Raycus RFL-P60QB 60 W Q-Switched Pulsed Fiber Laser with Red Beam Pointer

Price on request
Category:

Description

Product Overview

The Raycus RFL-P60QB is a 60 W Q-switched pulsed fiber laser independently developed and mass-produced by Wuhan Raycus Fiber Laser Technologies Co., Ltd. It belongs to the Raycus P-series Q-switched pulsed product line and uses acousto-optic Q-switching to generate pulsed output, with high peak power, high single pulse energy and excellent beam quality as its core strengths. This model has a built-in red beam pointer (the QB suffix) that displays the processing path in real time, greatly improving positioning accuracy and operating convenience, and it particularly suits applications with demanding accuracy requirements. The laser is widely used for marking, deep engraving and micro-machining of stainless steel, carbon steel, alloys and other metals, and for surface treatment of some non-metallic materials; it is the core light source of industrial laser marking machines and precision processing systems. Its all-fiber structure ensures high reliability and maintenance-free operation over long periods, and compared with traditional lamp-pumped or diode-pumped solid-state lasers it offers clearly higher electro-optical conversion efficiency, a smaller footprint and a longer service life.

Key Features

  1. High peak power pulsed output: acousto-optic Q-switching releases high energy density laser light within nanosecond pulses, with peak power reaching the kilowatt level and single pulse energy of 1.09 mJ at 60 W average power. Deep engraving and high quality marking of metals become straightforward, with sharp marking lines and high contrast.
  2. Excellent beam quality: beam quality factor M² under 1.6, close to the diffraction limit, ensures a small focused spot and concentrated energy for fine marking and micron-level processing; character clarity far exceeds that of ordinary sources.
  3. Highly stable laser output: output power instability under 3%, with minimal fluctuation during long continuous operation, ensuring consistency and repeatability in batch processing and suiting 7×24 production environments.
  4. Built-in red beam pointer: an integrated 635 nm red indicator shows the processing path and focus position in real time, so operators can locate the working area quickly without extra calibration, greatly shortening setup time, reducing scrap and raising production efficiency.
  5. Built-in optical isolator for high-reflection protection: a standard optical isolator prevents reflected light from returning into the laser and damaging internal components when processing highly reflective materials such as gold, silver, copper and aluminium, keeping operation safe and stable in those applications.
  6. All-fiber maintenance-free design: an all-fiber integrated structure leaves no optical lenses to adjust or clean; all internal optics are precisely packaged with fused taper technology, so routine maintenance is eliminated and cost of ownership drops, with mean time between failures above 100,000 hours.
  7. Efficient cooling and compact build: an efficient air-cooled design with multiple fans at the rear keeps the laser stable at ambient temperatures of 0-40 °C; the module measures only 340×95×260 mm, so it fits directly into all kinds of laser processing equipment.
  8. Standard interface and simple control: an industrial standard DB25 control port supports external TTL signal control, power adjustment from 10-100% and a 24 VDC supply, and is compatible with mainstream marking control cards such as JCZ and SamLight — plug and play, easy to integrate into a system.

Technical Specifications

Optical Characteristics
Average output power ≥60 W
Central wavelength 1064±5 nm
Repetition rate range 55-100 kHz
Output power instability Under 3%
Output Characteristics
Output beam diameter 5.7-8 mm
Beam quality M² Under 1.6
Pulse width 120-150 ns
Maximum single pulse energy 1.09 mJ
Polarization Random
Delivery fiber length 2 m (customizable)
Red beam pointer Built-in 635 nm red beam
Optical isolator Standard
Electrical Characteristics
Input power 24 VDC
Power adjustment range 10-100%
Power consumption ≤400 W
Other Specifications
Cooling method Air cooled
Dimensions (W × H × D) 340×95×260 mm
Operating temperature 0-40 °C
Storage temperature -20 to 60 °C
Storage humidity ≤80%

Operating Principle

The RFL-P60QB uses acousto-optic Q-switching to generate pulsed laser output. Pump light is absorbed by the dopant ions in the ytterbium-doped (Yb³⁺) fiber and creates a population inversion; while the acousto-optic Q-switch is in the closed state, losses in the resonator rise, oscillation is suppressed and energy keeps accumulating in the gain fiber. When the Q-switch opens rapidly, resonator losses drop sharply and the stored energy is released within a very short time as nanosecond pulses, producing Q-switched output with high peak power. Pulse width is typically in the 120-150 ns range and is determined jointly by the resonator parameters and the Q-switch modulation rate. This technology is mature and reliable with stable pulse parameters, and it is the most widely applied pulsed laser route in industrial marking.

Applications

  • Laser marking: high contrast marking of stainless steel, carbon steel, alloy steel and other metals; marks are clear and permanent and meet industrial traceability requirements
  • Deep engraving: high peak power allows deep engraving of metals, suitable for mould numbering, nameplate lettering and similar work
  • Electronic component marking: the fine spot meets the high precision marking needs of small parts such as electronic components, PCB boards and connectors
  • Precision welding: ample pulse energy supports precision processes such as spot welding and seam welding of thin sheet
  • Micro-machining and cutting: suited to precision work such as micro-hole drilling and scribing of thin metal sheet
  • ITO film etching and resistor trimming: fine control of pulse energy allows precise etching of thin films and fine adjustment of resistance

Selection Guide

As a 60 W Q-switched pulsed laser, the RFL-P60QB is a medium-to-high power marking source suited to high volume, high efficiency marking and to relatively deep metal engraving. The built-in red beam pointer and optical isolator let it process all kinds of metals, including highly reflective ones, safely and reliably. For higher power deep engraving or welding, consider the 70 W or 100 W models; for special processes such as oxidation colouring and colour marking, choose an MX model from the MOPA series.

Series Comparison

Parameter P20QE P20QS P20QB P30Q P30QS P30QB P50QB P60QB P70Q P100QA
Power (W) 20 20 20 30 30 30 50 60 70 100
Repetition rate (kHz) 30-60 30-60 30-60 30-60 30-60 30-60 50-100 55-100 20-400 20-200
Pulse width (ns) 120-150 120-150 110-140 110-130 120-150 120-150 120-150 120-150 50-110 50-110
M² Under 1.5 Under 1.6 Under 1.5 Under 1.5 Under 1.6 Under 1.6 Under 1.6 Under 1.6 Under 1.6 Under 1.6
Single pulse energy (mJ) 0.67 0.66 0.66 1 0.75 1 1 1.09 1 1
Red beam pointer No No Built-in No No Built-in Built-in Built-in No No
Power consumption (W) 170 180 170 240 240 240 340 400 400 450
Reference price On request On request On request On request On request On request On request On request On request On request

About the Brand

Wuhan Raycus Fiber Laser Technologies Co., Ltd. (Raycus) is a leading company in China’s fiber laser industry and the first high-tech enterprise in the country to develop and mass-produce fiber lasers independently. Founded in 2007 and listed on the Shenzhen Stock Exchange in 2018 (ticker 300747), it is headquartered in Optics Valley, Wuhan. Raycus masters the full industrial chain of core components from pump sources and gain fibers to fiber gratings, and its pulsed fiber laser line covers Q-switched series from 10 W to 250 W and MOPA series from 20 W to 250 W. The products are widely used in marking, cutting, welding and cleaning, hold a leading domestic market share and are exported to more than 50 countries and regions.

Contact Us

For more product information, a quotation or technical advice, please contact Soar Laser:

  • Sales hotline: +86 159-2722-0467
  • Website: www.soar-laser.cn
  • Brand website: www.raycuslaser.com

We provide professional selection guidance, on-site technical support and comprehensive after-sales service to match you with the best laser solution.

Reviews

There are no reviews yet.

Be the first to review “Raycus RFL-P60QB 60 W Q-Switched Pulsed Fiber Laser with Red Beam Pointer”

Your email address will not be published. Required fields are marked *

中文EN