QQ: 859818709

D69E Rotary Fixture 69 mm Three-Jaw Chuck Rotary Axis for Fibre Laser Marking

D69E Rotary Fixture 69 mm Three-Jaw Chuck Rotary Axis for Fibre Laser Marking

Price on request
Category:

Description

Product Overview

The D69E rotary fixture is a three-jaw chuck rotary axis designed for fibre laser marking machines, with a D69 chuck of 69 mm diameter. The high-grade cast iron three-jaw chuck offers moderate hardness, stable clamping, accurate positioning, smooth running and low friction. The tilt angle adjusts steplessly from 0° to 90° and locks manually, so workpieces of different shapes can be presented at the required angle. An industrial-standard aviation connector makes it plug-and-play with most fibre laser marking machine control boards. A stepper motor and driver are supplied as standard, with timing-belt transmission for smooth, quiet rotation, making it an ideal rotary accessory for cylindrical laser marking, welding and cutting.

Key Features

  • 🔩 High-grade cast iron three-jaw chuck
    A high-grade cast iron self-centring three-jaw chuck with moderate hardness, even clamping force and high positioning accuracy. The three jaws move in sync so the workpiece centres itself without jaw-by-jaw adjustment, greatly improving set-up efficiency. The chuck face is precision machined for smooth running and low friction, and resists wear over long service.
  • 📐 Stepless multi-angle adjustment
    The tilt angle adjusts steplessly from 0° to 90° and locks manually with stable positioning. 0° is horizontal, 90° is vertical, and any intermediate angle can be set. This flexibility covers cups, tubes, rings and other shaped workpieces, so one fixture handles many jobs.
  • 🔌 Industrial-standard aviation connector
    The industrial-standard aviation connector is directly compatible with most fibre laser marking and engraving machine control boards. Plug-and-play with no extra modification or rewiring, which shortens system integration and reduces cost.
  • ⚙️ Stepper motor with timing-belt drive
    Fitted with a 42 x 40 mm stepper motor and DM420 driver; the timing-belt drive provides a 2.5:1 reduction for high torque and smooth rotation. Belt transmission runs quietly with little vibration, so marking accuracy stays consistent throughout the rotation. The Ø12 mm through hole lets long shafts pass through for machining.
  • 🔧 Convenient installation
    Mounting holes are 70 x 45 mm (M5), so the fixture bolts directly onto the laser machine worktable. The 75 mm centre height works with a lifting table for precise focus adjustment. The E version is the standard type with a self-centring three-jaw chuck, high positioning accuracy and suitability for standard cylindrical workpieces.

Technical Specifications

Parameter Specification
Model D69E rotary fixture
Chuck D69 mm three-jaw self-centring chuck
Clamping range A (external) 1 – 20 mm
Clamping range B (internal) 20 – 60 mm
Clamping range C (reverse jaws) 18 – 52 mm
Tilt adjustment 0° – 90°
Motor 42 x 40 mm stepper motor
Driver DM420 driver
Transmission timing belt, 2.5:1 reduction
Through-hole diameter Ø12 mm
Centre height 75 mm
Dimensions 165 x 90 x 130 mm
Mounting holes 70 x 45 mm (M5)
Weight 3.2 kg
Interface industrial-standard aviation connector

Technical Notes

The rotary fixture drives the three-jaw chuck through a stepper motor and works in step with the galvo motion of the marking machine to mark cylindrical workpieces over a full 360°. During operation the laser galvo scans along the X axis while the fixture indexes in the rotary direction, and the two together cover the whole cylindrical surface. Chuck clamping is available in three modes, external (A), internal (B) and reverse jaws (C), to suit workpieces of different shapes and sizes. The 2.5:1 timing-belt reduction delivers sufficient torque together with fine angular resolution, which protects marking quality. When installing, make sure the rotary axis is perpendicular to the laser beam and that the centre height matches the focal height.

Applications

  • Laser marking on the cylindrical surface of stainless steel vacuum flasks
  • Laser engraving of rings, bangles and other jewellery
  • Laser lettering on pen barrels and tube parts
  • Laser marking of bearing inner and outer rings
  • Auxiliary rotation for laser welding of valves and flanged pipe fittings

Selection Guide

When choosing a rotary fixture, first confirm the maximum workpiece diameter; the chuck size should be larger than the workpiece diameter. D69 suits small workpieces (rings, pen barrels and similar), D80 suits medium workpieces (vacuum flasks, small tube parts) and D100/D125 suit large workpieces (large-diameter tube and bearings). The E version is the standard type, the F version is the reinforced type with higher torque, and the C version is the compact type; low-profile versions suit machines with limited Z-axis space. Roller-type fixtures suit slender workpieces that cannot be held in a chuck. Confirm that the driver interface of your machine control board is compatible before ordering.

Series Comparison

Model Chuck diameter Clamping range (external) Tilt Weight
D69E Ø69 mm 1 – 20 mm 0° – 90° 3.2 kg
D80E Ø80 mm 2 – 22 mm 0° – 90° 4.6 kg
D100E Ø100 mm 2 – 30 mm 0° – 90° 7.0 kg
D125E Ø125 mm 2.5 – 40 mm 0° – 90° 9.5 kg

About the Brand

Changsha Soar Laser Equipment Co., Ltd. (Soar Laser) specialises in the development and manufacture of laser processing machine accessories, focusing on laser rotary fixtures, optical benches and laser components. Our products are known for high precision, high stability and excellent value for money, and are widely used to equip and upgrade fibre laser marking machines, laser welding machines and similar equipment. They are trusted by laser equipment manufacturers and end users at home and abroad.

Contact Us

For more product information or a quotation, please contact our technical sales team:

📞 Hotline: +86 159-2722-0467

We provide professional selection support, volume purchase discounts and comprehensive after-sales service. Website: www.soar-laser.cn

Reviews

There are no reviews yet.

Be the first to review “D69E Rotary Fixture 69 mm Three-Jaw Chuck Rotary Axis for Fibre Laser Marking”

Your email address will not be published. Required fields are marked *

中文EN