Description
Product Overview
This 90-degree beam turning assembly redirects the beam path of a fibre laser marking machine: a 45° mirror is added at the galvo output to turn the beam by 90° towards the side or the inner cavity of the workpiece, and a fixed or rotating output section completes side-wall marking of large parts. The mirror holds its position firmly, so the spot does not drift after alignment. It is a common retrofit for marking large cabinets and enclosures.
Key Features
- 90° beam turning: redirects the galvo output so side walls are reachable
- Stable mirror positioning: turned spot stays stable without drift
- Large-part friendly: mark cabinets and enclosures without repositioning them
- Simple retrofit: fitted between the galvo output and the focusing lens
- Red-beam compatible: works with a red aiming beam for alignment
Technical Specifications
| Type | 90° beam turning assembly |
| Mounting position | between galvo output and focusing lens |
| Mirror | 45° mounting |
| Suitable machines | fibre laser marking machines |
Applications
Marking the side faces and inner walls of cabinets, sheet metal enclosures and frame-type workpieces. The same assembly also suits similar processing tasks; custom versions and volume solutions are available, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- The mirror mount face must be clean and flat. Loosen the locking screw before fine adjustment, then lock it afterwards; never force it, as this stresses and can damage the optic.
- Confirm the angle of incidence and orientation of the mirror or beam splitter against the beam path drawing. The beam should fall fully inside the clear aperture of the optic to avoid edge clipping.
- Models in the same series differ in power handling, clear aperture, interface and function modules; for volume purchase or production line integration, samples for trial and a solution evaluation can be requested.
- This item is genuine factory stock and ships with a packing list and warranty documentation; warranty and spare part support are provided from the date of receipt as agreed, excluding consumable items such as lenses and seals.
- This is the 90-degree beam turning assembly for fibre laser marking machines; key specifications are in the parameter table above. For higher power, larger aperture or a different interface or focal length version, contact us for a series comparison and quotation.
Usage Precautions
- Never look directly into the beam or mirror reflections while the laser is running. Mark the work area with warning signs and protective screens, and wear safety glasses rated for the wavelength in use.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lockout and tagging before work. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the unit from moisture and dust during transport and storage; before long-term shutdown, disconnect power and cover the equipment against dust.
- The adjustment mechanism is a precision part: avoid impacts and drops, load the optic evenly when clamping, and lock it before starting production.
- On receipt, check the model nameplate against the packing list first. If problems arise during installation or commissioning, contact Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Will the spot shift after turning?
The mirror holds its position firmly and the spot stays stable once alignment is complete. In environments with heavy vibration, check the locking screws periodically.
What mirror size is needed?
Choose according to the beam diameter leaving the galvo; Ø20 mm and Ø25 mm are the common sizes. An undersized aperture will clip the beam.
Can it rotate?
This assembly provides fixed turning. If full-circle rotating alignment is needed, choose the 360° rotating beam path joint (model 2285).
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.