QQ: 859818709

Four-Axis Synchronized Laser Marking System, X/Y/Z/Rotation Interpolation for Curved and Rotary Parts

Four-Axis Synchronized Laser Marking System, X/Y/Z/Rotation Interpolation for Curved and Rotary Parts

Price on request
Category:

Description

Product Overview

The four-axis synchronized marking system adds Z-axis and rotary-axis synchronized control to conventional X/Y planar marking. Four-axis synchronous interpolation keeps the laser focus on the workpiece surface and along the rotary path at all times, so curved, conical and rotational surfaces can be marked continuously without stitching separate zones. The system works with a marking card to output standard axis control signals, and production can start once the coordinates are calibrated. It suits complex markings such as curved logos on bottles, scales on conical surfaces and wrap-around text on shafts.

Key Features

  • Four-axis synchronization: X/Y/Z/rotation four-axis synchronous interpolation
  • Continuous curved-surface marking: the focus follows the curved surface, no stitching required
  • Rotary wrap-around: wrap-around text on shafts in a single pass
  • Marking card integration: standardised axis control signal output
  • Complete calibration workflow: batch production once the coordinates are calibrated

Technical Specifications

Type Four-axis synchronized marking system
Control axes X/Y/Z/rotation
Core function Four-axis synchronous interpolation
Compatible equipment Laser marking card + galvo scanner + axes
Typical workpieces Curved, conical and rotational surfaces

Applications

Curved logos on bottles, scales on conical surfaces, wrap-around text on shafts and three-dimensional dynamic marking of rotational parts. The system also handles comparable processes under similar working conditions; customised and volume solutions are available, and drawings or process requirements can be submitted for a detailed evaluation.

Selection Guide

  • For multi-axis systems, commission one axis at a time before linking the axes. Increase the acceleration, deceleration and following parameters gradually to avoid losing steps through a single large jump.
  • When the rotary axis works together with the galvo field, pay attention to the segment seam compensation settings; run a sample before volume production to confirm seam quality.
  • Models in the same series differ in power, clear aperture, interfaces and function modules. Sample trials and solution evaluations are available for volume purchases or production line integration.
  • This item is genuine original factory stock and ships with a packing list and a warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed, excluding consumables such as lenses and seals.
  • This model is the four-axis synchronized marking system; the key specifications are listed in the parameter table below. For higher power, a larger aperture or a different interface or focal length version, contact us for a series comparison and a quotation.

Usage Precautions

  • Never look directly into the beam or into mirror reflections while the laser equipment is running. Post warning signs and protective shielding around the working area, and wear safety goggles matched to the wavelength.
  • Use purified or deionised water in the water cooling system and replace it regularly. If a water temperature or flow alarm occurs, stop the machine, find the cause and then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician. Switch off, lock out and tag out before any work, and make sure the equipment is reliably grounded to prevent electric shock and interference.
  • Protect the equipment from moisture and dust during transport and storage. Before long-term shutdown, drain the water circuit, disconnect the power and cover the machine against dust.
  • Mechanical backlash in the multi-axis drive directly affects seam accuracy, so check the screw and timing belt tension regularly.
  • On receipt, check the model nameplate and the accessory list first. If problems arise during installation or commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

What is the difference between four-axis synchronization and ordinary rotary marking?
Ordinary rotary marking only combines the rotary axis with the galvo scanner; four-axis synchronization adds Z-axis travel and multi-axis interpolation, so three-dimensional curved surfaces can be processed continuously.

Is extra software required?
Use a marking software version that supports synchronized marking; once the coordinate system is calibrated, program the job as an ordinary graphic.

Can surfaces with a large height difference be marked?
This is limited by the depth of field of the field lens and by the Z-axis travel. Surfaces with a large height difference need segmentation or a longer Z stroke; submit the workpiece drawing and we will evaluate it.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are provided for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet. Appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page content without written permission is prohibited.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “Four-Axis Synchronized Laser Marking System, X/Y/Z/Rotation Interpolation for Curved and Rotary Parts”

Your email address will not be published. Required fields are marked *

中文EN