QQ: 859818709

ZBTK ZB3D30GH 30 mm Flying Welding Galvo Scanner Kit 3000 W Water-Cooled

ZBTK ZB3D30GH 30 mm Flying Welding Galvo Scanner Kit 3000 W Water-Cooled

Price on request
Category:

Description

Product Overview

The ZBTK ZB3D30GH is a 30 mm high-speed flying welding galvo scanner kit from Shenzhen ZBTK Technology Co., Ltd. (ZBTK). With a 30 mm clear aperture it is optimised for laser welding, accepts up to 3000 W of laser power and uses water cooling to keep long high-power runs stable and reliable. Welding speed reaches over 3 m/s and, combined with collimating lenses (F100/F150) and f-theta lenses (F210/F254/F330), the kit covers a wide range of weld seam geometries.

Key Features

⚡ High-Speed Welding Scanning

Welding scanning speed reaches 3 m/s with a positioning speed of 8 m/s and a tracking error of only 0.55 ms. The optimised servo control algorithm keeps trajectory accuracy extremely high even during high-speed wobble welding, so seam uniformity and consistency are far better than with conventional robot arm welding. Jump and transition delays are minimal, which shortens cycle time and raises line throughput. Both continuous seams and spot welds are processed stably and reliably at high speed.

🎯 High-Precision Positioning

Repeatability (RMS) is under 5 µrad, non-linearity under 0.5 mrad, gain drift under 80 ppm/K, zero drift under 40 µrad/K and 8-hour thermal drift under 0.15 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal drift compensation maintain outstanding positioning stability and process consistency during long continuous operation.

🌡️ Ultra-Low Thermal Drift

Fine optoelectronic sensing and an advanced automatic thermal drift compensation algorithm overcome the thermal drift problem of galvo scanners. Zero-point thermal drift is only under 40 µrad/K, gain thermal drift under 80 ppm/K and 8-hour long-term drift under 0.15 mrad, meeting the stability requirements of most long-duration, large-volume marking and welding applications. Process quality stays consistent even when ambient temperature fluctuates by ±10 °C.

🔧 High-Torque Permanent-Magnet Galvo Motor

The scanner uses ZBTK high-torque motors developed specifically for welding. Rotor inertia and torque constant are matched by design, so even with the load of a 30 mm large-aperture mirror the head still delivers a 0.55 ms tracking response and 3 m/s welding speed. High-temperature materials and an efficient heat path keep performance from degrading during long high-power runs.

📡 High-Precision Analog/Digital Servo Driver Board

The ZBTK high-performance servo driver board provides a high-speed PWM output stage and precise position detection. It uses a multi-stage anti-interference protection array, first-tier international components and a 360-hour extended burn-in before shipment, so it runs reliably over the long term even in harsh electromagnetic environments.

🔌 Interface Compatibility

The scanner supports the standard XY2-100 communication protocol and is compatible with most laser control cards on the market (JCZ EZCAD series, SCANLAB RTC series, RAYLASE SP-ICE series and others), so it is plug-and-play and quick to integrate. Power requirement is ±15 V / 10 A, and the interface cable is shielded to suppress external electromagnetic interference.

❄️ Efficient Cooling System

Water cooling is used, with the cooling circuit covering the mirror mount and the entrance aperture. This controls mirror temperature rise and prevents spot drift and focus shift caused by thermal lensing. Under high-power continuous operation the cooling system keeps the scanner at its optimum working temperature and preserves process consistency.

🛡️ Intelligent Monitoring and Protection

The welding scanner system includes a complete fault monitoring and alarm system that detects abnormal power supply, motor faults, driver board faults, cable connection faults, core-area temperature faults and protective window faults in real time. The system can actively cut the laser circuit and notify the welding control card to stop, preventing defective parts from reaching downstream stations and safeguarding production safety.

Detailed Specifications

Optical Parameters
Clear aperture 30mm
Scan angle ±0.35 rad
Max. laser power 3000W
Mirror coating wavelength 1030~1090nm
Scanning Parameters
Non-linearity under 0.5 mrad
Tracking time 0.55ms
Repeatability (RMS) under 5 µrad
Marking speed under 3 m/s
Positioning speed under 8 m/s
Gain drift under 80 ppm/K
Zero drift under 40 µrad/K
8-hour thermal drift (after 30 min warm-up) under 0.15 mrad
Electrical Parameters
Power supply ±15V/10A
Input signal protocol XY2-100
Cooling method Water cooling
Mechanical Parameters
Operating temperature 25±10 °C
Dimensions (L×W×H) 470x189x158mm
Weight 12kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors independently, steering the incoming laser beam to any position on the work plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the coils, electromagnetic torque turns the rotor and mirror to the commanded angle, while a position sensor (analog position detector, APD, or a digital encoder) reads the rotor angle continuously and compares it with the command to close the servo loop. A 3D scanner adds a Z-axis dynamic focusing module to the 2D scanner, moving a variable-focus lens (meniscus lens) back and forth to shift the focal plane along Z so the focus can be placed precisely anywhere in three-dimensional space. In a front-focus 3D scanner the Z axis sits ahead of the XY pair, so the beam is focused first and deflected afterwards, which allows a larger working field and curved-surface processing; in a rear-focus 3D scanner the Z axis follows the XY pair, so the beam is deflected first and focused afterwards, giving a more compact head that suits small-field high-precision 3D processing. Scan speed depends on the dynamic response of the motors, and the tracking time, which describes how far the scanner lags behind the command signal, is the key figure of merit for high-speed performance.

Applications

Laser Welding

Precision welding of stainless steel, carbon steel, aluminium alloy, copper alloy and other metals in spot, seam, butt and lap configurations, with clean bead appearance, a small heat-affected zone and high welding speed.

New Energy Vehicles

Welding of power battery cells, battery module busbars and motor stators and other core parts, meeting high safety and high consistency requirements.

Consumer Electronics (3C)

Welding of phone middle frames, notebook housings, connectors and other precision electronic parts, with fine weld spots and low distortion for miniaturised production.

Aerospace

Aero-engine blade repair welding and titanium alloy structural part welding, where reliable weld quality is required against demanding industry standards.

Medical Devices

Welding of medical catheters, stents and surgical instruments, with high seam cleanliness for medical-grade quality requirements.

Hardware Products

Automated welding of kitchen and bathroom hardware, locks and valves, with high efficiency and good consistency that clearly reduce labour cost.

Power and Electrical Equipment

Welding of transformer copper busbars, switchgear busbars and electrical contacts, giving good conductivity and low contact resistance.

Selection Guide

When choosing a welding scanner, first size the clear aperture to the laser power: up to 1500 W a 14 mm aperture is sufficient, 1500-3000 W calls for 20-30 mm, and above 3000 W requires 33 mm or larger. Then match the model to the speed requirement: the 30G standard series for conventional welding, the 30BS high-speed series for fast welding, and the 30G-FB2 digital closed-loop series where high repeatability and low drift are essential. For very high power above 6000 W the LHP33-FB2 is the first choice. Welding scanners must be water cooled, and the f-theta focal length should be chosen from the required seam width and working distance together.

Series Comparison

Model Clear Aperture Wavelength Focus Type Marking Speed Repeatability Max. Power Reference Price
3D14C (355nm) 14mm 355nm Rear focus under 1.5 m/s under 3 µrad 30W On request
3D20C (355nm) 20mm 355nm Rear focus under 2 m/s under 4 µrad 30W On request
3D20C (1064nm-F) 20mm 1064nm Front focus under 2 m/s under 4 µrad 500W On request
ZB3D-12D (1064nm-R) 12mm 1064nm Rear focus under 2 m/s under 3 µrad 200W On request
3D30A (930nm) 30mm 930nm Rear focus under 3 m/s under 5 µrad 3000W On request
GD3D-1064-14A 14mm 1064nm Front focus under 2 m/s under 3 µrad 500W On request
ZB3D14A1064 14mm 1064nm Front focus (curved surface) under 2 m/s under 3 µrad 500W On request
3D40AD10600FF-H 40mm 10600nm Front focus under 2 m/s under 8 µrad 1000W On request
ZB3D30GH 30mm 1030~1090nm 3D flying welding under 3 m/s under 5 µrad 3000W On request

About the Brand

Shenzhen ZBTK Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of R&D and production experience. Its portfolio covers 2D scanning heads, 3D dynamic focusing heads, welding scanners and OCT galvo motors, and is widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for their cost-performance ratio and stability, can replace imported equivalents, and enjoy a solid reputation in the Chinese laser industry.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

Soar Laser provides professional galvo scanner selection advice and complete system integration solutions. Call us any time.

Reviews

There are no reviews yet.

Be the first to review “ZBTK ZB3D30GH 30 mm Flying Welding Galvo Scanner Kit 3000 W Water-Cooled”

Your email address will not be published. Required fields are marked *

中文EN