Description
Product Overview
The BF03F is a single-galvo laser welding head from Empower / RayTools: 3 kW power class, the standard XY2-100 galvo interface, and a fixed spot whose weld path is produced by the galvo scan rather than by moving the head. The structure is simple and reliable and the cost is friendly, so it suits edge-sealing welds, ring welds and other fixed seam processes, and it is the entry-level route into wobble-class welding and into dedicated-machine integration.
Key Features
- Single-galvo design: standard XY2-100 interface
- 3 kW power class: welding of thin and medium plate
- Fixed spot: the path is produced by the galvo scan, so consistency is high
- Cost-effective: the entry point into wobble-class welding
- Dedicated-machine integration: flexible routing with the machine control system
Technical Specifications
| Brand | Empower / RayTools |
| Model | BF03F |
| Type | Single-galvo laser welding head |
| Power | 3 kW |
| Galvo Interface | XY2-100 |
| Process | Edge-sealing welds, ring welds and other fixed seams |
Applications
Edge-sealing welding, circumferential (ring) seams, integration into small dedicated machines and entry-level wobble welding. The head also suits comparable processing duties under similar conditions; non-standard customisation and volume solutions can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- RayTools welding heads are selected by power class and process type: for hand-held work choose the BW/BH series, for automated platforms and dedicated machines the BF series, and for filler-wire processes the BP coaxial wire-feed or GW push-pull wire models.
- Optional modules such as coaxial CCD and temperature monitoring are specified according to line requirements; set the protective lens replacement interval and the cleaning frequency from shift output, and keep an inspection record.
- Models in the same series differ in power, clear aperture, interface and function modules; for volume purchase or line matching, sample trials and a solution evaluation can be requested.
- This item is genuine original factory stock and ships with a packing list and warranty document; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
- This model is the BF03F single-galvo laser edge-sealing head; the key specifications are in the table above. For higher power, a larger aperture or a different interface or focal length, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
- Use purified or deionised water in the water-cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- Configure the cooling water flow of the welding head as stated in the manual: water that is too cold causes condensation and water that is too hot reduces power; if the inlet-to-outlet temperature difference is abnormal, check the water circuit first.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
How does a single-galvo head differ from a dual-galvo head?
A single-galvo head keeps the spot fixed and forms the seam through the scanning path; a dual-galvo head can superimpose a wobble, which gives more freedom in bead shape and in the process window.
Can a CCD camera be fitted?
The BF03F is focused on the welding process itself; where CCD vision is needed, choose the BF03S version with a built-in CCD.
Which laser does it match?
Fibre lasers with a QBH interface up to 3 kW.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.









Reviews
There are no reviews yet.