QQ: 859818709

RayTools BF03S Lightweight Wobble Welding Head, 3 kW, 0-5 mm, 500 Hz, Built-in CCD

RayTools BF03S Lightweight Wobble Welding Head, 3 kW, 0-5 mm, 500 Hz, Built-in CCD

Price on request
Category:

Description

Product Overview

The BF03S is a single-galvo wobble welding head from Empower / RayTools: 3 kW power, a wobble amplitude of 0-5 mm at a frequency of up to 500 Hz, and eight wobble patterns for a wide variety of bead shapes. A built-in coaxial CCD makes joint alignment direct. Collimation focal lengths of 100/125 mm and focusing focal lengths of 200-300 mm are available, and at about 1.0 kg the head is light in the hand while remaining just as flexible for automated integration.

Key Features

  • Wobble welding: 0-5 mm amplitude, ≤500 Hz
  • 8 patterns: dot, line, circle, figure-eight and more, for a wide range of bead shapes
  • Built-in CCD: coaxial observation, direct joint alignment
  • About 1.0 kg: light enough for hand-held work
  • Selectable focal lengths: collimation 100/125, focusing 200-300

Technical Specifications

Brand Empower / RayTools
Model BF03S
Type Single-galvo wobble welding head
Power 3 kW
Wobble Amplitude 0-5 mm
Wobble Frequency ≤500 Hz
Wobble Patterns 8
CCD Built-in, coaxial
Collimation Focal Length 100 mm / 125 mm
Focusing Focal Length 200-300 mm
Weight approx. 1.0 kg

Applications

Hand-held wobble welding, precision welding of thin sheet and automated welding platforms. The head also suits comparable processing duties under similar conditions; non-standard customisation and volume solutions can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.

Selection Guide

  • Welding heads are selected with headroom below the maximum laser power; the weld spot width is directly related to the focusing lens focal length, and a special weld width needs a custom lens set – send us your seam requirements for an evaluation.
  • The protective lens is a consumable: buy spares together with the machine and keep them in stock. A contaminated lens causes power loss, a wider bead and a higher porosity rate.
  • Models in the same series differ in power, clear aperture, interface and function modules; for volume purchase or line matching, sample trials and a solution evaluation can be requested.
  • This item is genuine original factory stock and ships with a packing list and warranty document; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
  • This model is the BF03S lightweight wobble welding head; the key specifications are in the table above. For higher power, a larger aperture or a different interface or focal length, contact us for a series comparison and a quotation.

Usage Precautions

  • Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
  • Use purified or deionised water in the water-cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
  • When replacing the protective lens inside the barrel, make sure the sealing ring is pressed home; a gas path that does not hold pressure will accelerate lens contamination.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

What are the benefits of wobble welding?
A wider bead, less porosity, an even fish-scale finish and less distortion on thin sheet.

What are the eight wobble patterns?
Common patterns such as dot, straight line, circle and figure-eight; the exact set may differ slightly with the software version.

What does the BF03S add over the BF03F?
A wobble drive, a pattern library and a built-in CCD, so process capability is a full step higher.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools BF03S Lightweight Wobble Welding Head, 3 kW, 0-5 mm, 500 Hz, Built-in CCD”

Your email address will not be published. Required fields are marked *

中文EN