QQ: 859818709

RayTools EDS-C100 EtherCAT Bus Cutting I/O Board (Microsecond Refresh)

RayTools EDS-C100 EtherCAT Bus Cutting I/O Board (Microsecond Refresh)

Price on request
Category:

Description

Product Overview

The EDS-C100 is a RayTools cutting I/O board built around bus communication: it supports EtherCAT and other fieldbus protocols, and microsecond-level data refresh delivers high-speed transmission with precise control. The modular design allows I/O expansion, standard interfaces connect quickly to mainstream systems, and the board serves as the I/O core of a bus-architecture cutting machine.

Key Features

  • Bus communication: supports EtherCAT and other protocols
  • Microsecond refresh: high-speed data transfer
  • Precise control: high-accuracy I/O response
  • Modular expansion: I/O added as required
  • Standard interfaces: simple integration

Technical Specifications

Brand Empower / RayTools
Model EDS-C100
Type Bus cutting I/O board
Protocol EtherCAT and others
Refresh rate Microsecond level
Structure Modular, expandable

Applications

I/O for bus-architecture laser cutting machines, and OEM electrical integration of complete machines. The same board also covers comparable duties, with non-standard customisation and batch projects available on request; drawings or electrical requirements can be supplied for a detailed assessment.

Selection Guide

  • When specifying a control system, settle the servo architecture (EtherCAT bus or pulse) and the laser source brand first, then choose the matching system version so the interfaces do not clash; the I/O board follows the same decision, because a bus machine needs a bus board.
  • A bus build keeps cabinet wiring simple, refreshes fast and expands easily; when retrofitting older equipment, confirm the existing electrical interface first, and keep a conventional I/O board in the specification if the machine is not bus based.
  • Models in the series differ in channel count, bus protocol, interface and function modules; sample trials and solution assessments can be requested for batch purchases or OEM projects.
  • The product is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables.
  • This model is the EDS-C100 bus cutting I/O board, and its key specifications are listed in the table above. For a different channel count, another bus protocol or a different interface configuration, contact us for a series comparison and quotation.

Usage Precautions

  • Never look directly into the beam or into specular reflections while the laser is running; mark the work area with warning signs and shielding, and wear protective goggles matched to the wavelength.
  • Electrical wiring and servicing must be carried out by a licensed electrician with lockout and tagout applied; the equipment must be reliably earthed to prevent leakage and interference.
  • Protect the board from moisture and dust during transport and storage; before long shutdowns, disconnect power and cover the cabinet against dust.
  • Configure cabinet ventilation for the board and the drives as the installation standard requires, fit duct filters in dusty plants, and back up system parameters regularly.
  • On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

How does it differ from the EDS-3020?
The EDS-C100 runs on the EtherCAT bus and refreshes faster, which suits bus-architecture machines; the EDS-3020 is a conventional I/O board.

Can the I/O be expanded?
The modular design accepts additional I/O modules, added to suit the machine requirement.

What are the wiring requirements?
Connect the bus topology as the standard specifies, with shielding and earthing following the electrical standard of the machine.

Disclaimer

The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools EDS-C100 EtherCAT Bus Cutting I/O Board (Microsecond Refresh)”

Your email address will not be published. Required fields are marked *

中文EN