Description
Product Overview
The XC3000Pro coil version is a RayTools CNC system for coiled strip that is fed in segments and spliced during cutting: a small-format machine can produce long parts without a large-format bed, and segment splicing is fully automatic. Cutting runs online while the coil keeps feeding, and jobs can be imported in batches for continuous processing, which saves both labour and cost. EtherCAT bus and pulse servo can be mixed on the same machine, and mainstream laser sources are supported.
Key Features
- Segment splicing: long parts on a small-format machine
- Online cutting: the coil feeds and is cut at the same time
- Batch jobs: import once, then run as a batch
- Mixed drives: EtherCAT and pulse on one machine
- Lower cost, higher output: less equipment and less labour
Technical Specifications
| Brand | Empower / RayTools |
| Model | XC3000Pro (coil) |
| Type | Coil segment-splicing / online laser cutting CNC system |
| Bus | EtherCAT / pulse + direction (mixed) |
| Processing | Coil segment splicing, online cutting |
| Power class | Mid-to-low power |
| Core advantage | Long parts on a small-format machine |
Applications
Coil cutting lines, segment processing of long parts, and continuous online cutting. The same system also covers comparable duties, with non-standard customisation and batch projects available on request; drawings or process requirements can be supplied for a detailed assessment.
Selection Guide
- When specifying the control system, settle the servo architecture (EtherCAT bus or pulse) and the laser source brand first, then choose the matching system version, so the interfaces do not clash.
- The bus version keeps wiring simple, refreshes fast and expands well; when retrofitting older equipment, confirm the existing electrical interface first and choose a pulse version or a mixed-support model where necessary.
- Models in the coil line differ in segment length, splice tolerance, feed axis configuration, interface and function modules; sample trials and solution assessments can be requested for batch purchases or production line projects.
- The product is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing parts and damage caused by incorrect operation.
- This model is the XC3000Pro (coil), and its key specifications are listed in the table above. For a longer segment, a wider coil, or a different interface or function set, contact us for a series comparison and quotation. Contact us for a series comparison and quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running; mark the work area with warning signs and shielding, and wear protective goggles matched to the wavelength.
- Where the machine uses water cooling for the laser source or the optics, fill with purified or deionised water and change it on schedule; stop and investigate before restarting if a temperature or flow alarm appears.
- Electrical wiring and servicing must be carried out by a licensed electrician with lockout and tagout applied; the equipment must be reliably earthed to prevent leakage and interference.
- Protect the cabinet from moisture and dust during transport and storage; before long shutdowns, disconnect power and cover the cabinet against dust.
- Configure cabinet ventilation for the controller and the drives as the installation standard requires, fit duct filters in dusty plants, and back up system parameters regularly.
- On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Is the splice line visible?
The segment-splicing algorithm holds seam registration; under normal process conditions the kerf runs continuous, provided the clamping and the datum stay stable.
Which materials suit coil cutting?
Thin coiled strip – cold-rolled, galvanised, aluminium coil and similar – suits it best; heavier coil is assessed against the capability of the machine.
How are jobs imported in batches?
Job batches can be imported and scheduled in one go, then run as continuous production.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.