Description
Product Overview
The XC4000C is a RayTools tube laser cutting system on the xStudio platform: it is operated from a configuration-screen HMI that is straightforward and quick to learn, and it covers tube cut-off, stock pull-feeding and combined cutting. EtherCAT bus and pulse-plus-direction servo drives are both supported, and mainstream IPG, SPI and Raycus sources can be connected. It is the entry-level and standardised configuration for tube cutting machines.
Key Features
- Configuration-screen HMI: intuitive and simple to operate
- Cut-off function: tube cut-off processing
- Pull-feeding: automatic stock feed
- Combined cutting: several processes in one system
- Dual drive: EtherCAT bus plus pulse servo
Technical Specifications
| Brand | Empower / RayTools |
| Model | XC4000C |
| Type | Cut-off / pull-feeding / combined tube cutting system |
| Bus | EtherCAT / pulse + direction |
| HMI | Configuration screen |
| Laser source | IPG, SPI, Raycus and others |
| Platform | xStudio |
Applications
Tube laser cutting machines, metal products, and architectural and decorative tube processing. The same system also covers comparable duties, with non-standard customisation and batch projects available on request; drawings or process requirements can be supplied for a detailed assessment.
Selection Guide
- When specifying the control system, settle the servo architecture (EtherCAT bus or pulse) and the laser source brand first, then choose the matching system version, so the interfaces do not clash.
- The bus version keeps wiring simple, refreshes fast and expands well; when retrofitting older equipment, confirm the existing electrical interface first and choose a pulse version or a mixed-support model where necessary.
- Models in the tube line differ in chuck count, cut-off and pull-feeding configuration, interface and function modules; sample trials and solution assessments can be requested for batch purchases or production line projects.
- The product is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing parts and damage caused by incorrect operation.
- This model is the XC4000C, and its key specifications are listed in the table above. For a different chuck configuration, an additional process, or a different interface, contact us for a series comparison and quotation. Contact us for a series comparison and quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running; mark the work area with warning signs and shielding, and wear protective goggles matched to the wavelength.
- Where the machine uses water cooling for the laser source or the optics, fill with purified or deionised water and change it on schedule; stop and investigate before restarting if a temperature or flow alarm appears.
- Electrical wiring and servicing must be carried out by a licensed electrician with lockout and tagout applied; the equipment must be reliably earthed to prevent leakage and interference.
- Protect the cabinet from moisture and dust during transport and storage; before long shutdowns, disconnect power and cover the cabinet against dust.
- Configure cabinet ventilation for the controller and the drives as the installation standard requires, fit duct filters in dusty plants, and back up system parameters regularly.
- On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
How do the XC4000C, P and T differ?
The C version focuses on cut-off and pull-feeding, the P version on combined pull-feeding, and the T version is the standard two-chuck professional model; choose by the tube work you do.
Are irregular sections supported?
The XC4000C is mainly for cut-off and pull-feeding of standard tube; for irregular sections and bevelling, the XC4000T or a higher configuration is recommended.
Is the configuration-screen HMI easy to use?
The graphical interface follows the work flow step by step, so operators get up to speed quickly.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.