QQ: 859818709

RayTools XC4000P Configuration-Screen Tube Cut-Off Laser Cutting System

RayTools XC4000P Configuration-Screen Tube Cut-Off Laser Cutting System

Price on request
Category:

Description

Product Overview

The XC4000P is a RayTools tube laser cutting system built on the xStudio platform. It runs from a configuration-screen HMI, covers combined pull-feeding tube cutting, and accepts both EtherCAT bus and pulse servo drives. Installation and commissioning are straightforward and the function set is complete, so the system is aimed at combined tube processing and continuous pull-feeding lines. Inside the XC4000 family the XC4000C is the cut-off, pull-feeding and combined entry model, while the XC4000P is positioned on combined pull-feeding duty, where stock feed and cutting are coordinated in one cycle.

Key Features

  • Combined pull-feeding: coordinated feed and cut for combined tube processing
  • Configuration-screen HMI: graphical interface, intuitive to operate
  • Dual drive: EtherCAT bus plus pulse servo
  • Straightforward commissioning: short path from installation to production
  • Mainstream laser compatibility: IPG, SPI, Raycus and others

Technical Specifications

Brand Empower / RayTools
Model XC4000P
Type Configuration-screen tube cut-off cutting system
Bus EtherCAT / pulse + direction
HMI Configuration screen
Functions Cut-off / pull-feeding / combined cutting
Platform xStudio

Applications

Combined tube cutting, continuous pull-feeding production and metal-products lines. The same controller also suits comparable duties; non-standard builds and batch projects are discussed on request, and drawings or process requirements can be supplied for a detailed assessment.

Selection Guide

  • Fix the servo architecture first, EtherCAT bus or pulse-plus-direction, together with the laser source brand, then pick the matching system version; a mismatched interface is the usual cause of commissioning delay.
  • A bus version keeps cabinet wiring lean and refreshes quickly; when retrofitting an older tube machine, check the existing electrical interface before deciding between a pulse version and a mixed-support model.
  • Versions in the family differ in power class, interface and function modules; sample trials and solution assessments can be arranged for batch orders and line-integration projects.
  • The unit is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support run from receipt as agreed, consumable wear parts such as protective lenses excluded.
  • This model is the XC4000P and the key figures are in the table above; for a higher power class, a larger tube diameter or a different interface, ask us for the family comparison and a quotation.

Usage Precautions

  • Do not look into the beam or into specular reflections while the machine is cutting; fence the working area, post warning signs and wear goggles rated for the wavelength in use.
  • Fill the water circuit with purified or deionised water and replace it on schedule; if a temperature or flow alarm appears, stop the machine and find the cause before restarting.
  • Wiring and servicing are for a licensed electrician only, with lockout and tagout applied; the machine must be solidly earthed against leakage and electrical interference.
  • Keep the cabinet dry and dust-free in transit and in store; before a long idle period, disconnect power and cover the machine.
  • Ventilate the cabinet for the controller and drives to the installation standard, add duct filtration in dusty shops, and back up system parameters on a routine.
  • Check the nameplate and the accessory list on delivery; for commissioning help, call Changsha Soar Laser support on +86 159-2722-0467 for remote or on-site assistance.

FAQ

What does combined pull-feeding mean?
Stock feed and cutting are coordinated in one cycle, so tube runs continuously instead of being loaded part by part, which raises the throughput of the whole line.

How does the XC4000P differ from the XC4000C?
Both are configuration-screen tube systems on xStudio. The P version is positioned on combined pull-feeding work, the C version on cut-off with pull-feeding; choose by the process your line runs.

Can it run batch jobs?
Yes. Jobs can be sequenced, so production continues order by order without re-teaching each part.

Disclaimer

Specifications on this page are compiled from the manufacturer’s published information and existing documentation and are intended as a selection aid only. The delivered item, its factory inspection report and the manufacturer’s current specification sheet take precedence; appearance and configuration can change between production batches, so please confirm details with us before ordering. Reproduction of this page without written permission is not permitted.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools XC4000P Configuration-Screen Tube Cut-Off Laser Cutting System”

Your email address will not be published. Required fields are marked *

中文EN