Description
Product Overview
The XC3000Plus-EtherCAT is the bus-standardised version of the RayTools XC3000Plus mid-to-high power flat-sheet laser cutting CNC system, built on the xStudio platform: motion control runs over the EtherCAT bus in full closed loop and in real time, and both flat-sheet and tube cutting are supported. A material process parameter library is built in, mainstream sources such as IPG, SPI and Raycus can be connected, and the HMI is intuitive to operate. As the bus-standardised member of the family it is aimed at mid-to-high power machine OEM builds.
Key Features
- EtherCAT bus: full closed-loop real-time control
- Flat sheet and tube: two machining forms in one system
- Process parameter library: mainstream material parameters built in
- Laser compatibility: IPG, SPI, Raycus and others
- Mid-to-high power: the OEM mainstay of the range
Technical Specifications
| Brand | Empower / RayTools |
| Model | XC3000Plus-EtherCAT |
| Type | Flat-sheet laser cutting CNC system (EtherCAT) |
| Bus | EtherCAT |
| Cutting functions | Flat sheet + tube |
| Power class | Mid-to-high power |
| Platform | xStudio |
Applications
Mid-to-high power flat-sheet cutting machines, sheet-metal fabrication and tube cutting equipment. Comparable duties are handled by the same controller; non-standard builds and batch projects can be discussed, and drawings or process requirements are welcome for a detailed assessment.
Selection Guide
- Settle the servo architecture – EtherCAT bus or pulse – and the laser source brand before the system version is chosen, so the interfaces do not clash at commissioning.
- The bus version keeps cabinet wiring lean, refreshes quickly and expands well; when an older machine is retrofitted, confirm the existing electrical interface first and take a pulse version or a mixed-support model where necessary.
- Versions in the family differ in power class, interface and function modules; sample trials and solution assessments can be arranged for batch orders and line-integration projects.
- The unit is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support run from receipt as agreed, consumable wear parts such as protective lenses and seals excluded.
- This model is the XC3000Plus EtherCAT bus version and the key figures are in the table above; for a higher power class, a different interface or a different function set, ask us for the family comparison and a quotation.
Usage Precautions
- Do not look into the beam or into specular reflections while the laser is running; fence the work area, post warning signs and wear goggles rated for the wavelength in use.
- Fill the water circuit with purified or deionised water and change it on schedule; if a temperature or flow alarm appears, stop the machine and find the cause before restarting.
- Wiring and servicing are for a licensed electrician only, with lockout and tagout applied; the equipment must be solidly earthed against leakage and electrical interference.
- Protect the cabinet from moisture and dust in transit and in store; before a long idle period, disconnect power and cover the unit.
- Configure cabinet ventilation for the controller and the drives to the installation standard, fit duct filters in dusty shops, and back up system parameters on a routine.
- On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support on +86 159-2722-0467 for remote or on-site assistance.
FAQ
How does it differ from the XC3000Plus?
This is the EtherCAT bus-standardised version: control and communication are built around the bus, while the process capability of the two versions is the same.
How is tube cutting used?
Add the tube chuck and the software module and the machine switches to the tube machining form.
Can it be extended?
Third-party plug-ins and function extensions are supported and configured as required.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.