Description
Product Overview
The XC3000S-EtherCAT is the bus version of the RayTools XC3000S mid-to-low power flat-sheet laser cutting CNC system, built on the xStudio platform: the three signature functions of the XC3000S – no-sense piercing, intelligent obstacle avoidance and vibration suppression – are retained, and communication runs over EtherCAT. Thin plate and thick plate both cut stably, duct NC jobs can be imported in batches, and the bus architecture keeps machine wiring lean with fast control response, which makes this the economical bus option for mid-to-low power flat-sheet cutting.
Key Features
- Three signature functions: no-sense piercing / intelligent obstacle avoidance / vibration suppression
- EtherCAT bus: fast communication, lean wiring
- Mid-to-low power: the economical option
- Batch jobs: duct NC import and processing
- Laser compatibility: IPG, SPI, Raycus and others
Technical Specifications
| Brand | Empower / RayTools |
| Model | XC3000S-EtherCAT |
| Type | Flat-sheet laser cutting CNC system (EtherCAT) |
| Bus | EtherCAT |
| Signature functions | No-sense piercing / intelligent obstacle avoidance / vibration suppression |
| Power class | Mid-to-low power |
| Platform | xStudio |
Applications
Mid-to-low power flat-sheet cutting machines, duct fabrication and volume thin-sheet cutting. Comparable duties are handled by the same controller; non-standard builds and batch projects can be discussed, and drawings or process requirements are welcome for a detailed assessment.
Selection Guide
- Settle the servo architecture – EtherCAT bus or pulse – and the laser source brand before the system version is chosen, so the interfaces do not clash at commissioning.
- The bus version keeps cabinet wiring lean, refreshes quickly and expands well; when an older duct-cutting machine is retrofitted, confirm the existing electrical interface first and take a pulse version or a mixed-support model where necessary.
- Versions in the range differ in power class, function modules and interface options; sample trials and solution assessments can be arranged for batch orders and line-integration projects.
- The unit is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support run from receipt as agreed, consumable wear parts such as protective lenses and seals excluded.
- This model is the XC3000S EtherCAT bus version and the key figures are in the table above; for a higher power class, a different interface or a different function set, ask us for the family comparison and a quotation.
Usage Precautions
- Do not look into the beam or into specular reflections while the laser is running; fence the work area, post warning signs and wear goggles rated for the wavelength in use.
- Fill the water circuit with purified or deionised water and change it on schedule; if a temperature or flow alarm appears, stop the machine and find the cause before restarting.
- Wiring and servicing are for a licensed electrician only, with lockout and tagout applied; the equipment must be solidly earthed against leakage and electrical interference.
- Protect the cabinet from moisture and dust in transit and in store; before a long idle period, disconnect power and cover the unit.
- Configure cabinet ventilation for the controller and the drives to the installation standard, fit duct filters in dusty shops, and back up system parameters on a routine.
- On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support on +86 159-2722-0467 for remote or on-site assistance.
FAQ
How does it differ from the pulse version of the XC3000S?
The control architecture differs: this version runs on the EtherCAT bus, so machine wiring is leaner and response is faster, while the process functions are the same.
Which servo should I choose?
Bus servos connect to EtherCAT directly, so configuration is simple.
Which lasers are supported?
Mainstream fiber lasers such as IPG, SPI and Raycus.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.