Description
Product Overview
The BH03K is a 4-in-1 handheld laser processing head from RayTools and the current designation for the former BW101-GS. One body covers four working modes: wobble welding, laser cleaning, weld-seam cleaning and remote processing, so a single tool stands in for a welding head, a cleaning head and a remote unit. The clear aperture is 10 mm with 60 mm collimation and a choice of 150 mm or 200 mm focusing. Wobble amplitude is adjustable over 0-5 mm for welding, 0-10 mm for cleaning and 0-80 mm for remote work. An 18×2 mm protective lens, 15-25 L/min gas consumption, a QBH fiber interface and a body weight of about 0.9 kg complete the package.
Key Features
- Four modes in one body: wobble welding, laser cleaning, weld-seam cleaning and remote processing
- Ultra-light: about 0.9 kg for the complete head, comfortable in one hand
- Amplitude adjustable per mode: 0-5 mm welding, 0-10 mm cleaning, 0-80 mm remote
- QBH fiber interface: fits mainstream fiber lasers without adapters
- Selectable focusing: 150 mm or 200 mm
Technical Specifications
| Brand | Empower / RayTools |
| Model | BH03K (formerly BW101-GS) |
| Type | 4-in-1 handheld laser processing head |
| Power | up to 3000 W |
| Fiber Interface | QBH |
| Clear Aperture | 10 mm |
| Collimation / Focusing | 60 mm / 150 mm, 200 mm |
| Wobble Amplitude | 0-5 mm welding / 0-10 mm cleaning / 0-80 mm remote |
| Protective Lens | 18×2 mm |
| Gas Consumption | 15-25 L/min |
| Weight | approx. 0.9 kg |
Applications
Handheld welding, laser cleaning, post-weld seam treatment, and remote edge trimming and clean-up. The cleaning and remote modes are what make the head worth carrying on large fabrications: rust, mill scale and coating come off with the same tool that lays the bead, and edges are trimmed without bringing the part to a bench. If your process is not on this list, send us the drawing or the process requirement and we will confirm whether the BH03K covers it or whether a dedicated head is the better fit.
Selection Guide
- Choose by mode mix. Where the shop has to weld, clean and trim the same part, one BH03K replaces three tools; where the work is welding only, a single-purpose welding head is the cheaper answer.
- Fix the focusing option before ordering: 150 mm gives a tighter spot for thin sheet, 200 mm gives more working distance for awkward joints.
- Check the laser source: QBH output at 3000 W or below. Above that, step up to the BW06K or BW08L handheld heads.
- Because the head carries its own cleaning and remote functions, the practical gain is less equipment on the floor and no head-change downtime between welding and clean-up.
- Every unit ships from original factory stock with a packing list and warranty certificate; warranty and spare-part support run from the delivery date, wear items such as lenses and seals excluded.
- Key specifications are in the table above. For a different interface or a larger aperture, contact us for a comparison across the series and a quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
- Use purified or deionised water in the cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- Set the process mode in the control system before the beam is enabled, and match the nozzle and the parameter set to that mode; running a cleaning programme with a welding nozzle fitted damages the optics.
- Carry out the daily inspection and maintenance described in the manual, stop the machine at the first sign of a fault and find the cause before restarting, so that a small fault does not grow into a large one.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
How are the four modes switched?
Switch the process mode in the control system and change the nozzle and the parameter set to match. The head itself stays on the arm, so there is no mechanical changeover.
Which model replaces the former BW101-GS?
The BH03K. RayTools moved to the new naming scheme and the function set is unchanged.
Why pay more than a single-function head?
Four functions in one body remove repeat equipment purchases and the downtime of swapping heads, so the total cost of ownership is lower once more than one process is needed.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.





Reviews
There are no reviews yet.