Material library search and comparison
Search by name, chemical formula or category; click a card to view the refractive-index details and dispersion curve of that material, and add it to the comparison (up to 3 materials).
Core formulae and principles
Common optical glass reference (n_d and V_d taken from manufacturers’ datasheets)
| Grade | Type | n_d | V_d | Dispersive power 1/V_d | Typical applications |
|---|---|---|---|---|---|
| N-BK7 (SCHOTT) | Crown | 1.51680 | 64.17 | 0.01558 | General lenses and prisms |
| N-BK10 (SCHOTT) | Crown | 1.49782 | 66.95 | 0.01494 | Low-dispersion elements |
| N-BAK4 (SCHOTT) | Crown | 1.56883 | 55.98 | 0.01786 | Photographic objectives |
| LLF1 (SCHOTT) | Flint | 1.54814 | 45.75 | 0.02186 | Achromatic components |
| F2 (SCHOTT) | Flint | 1.62004 | 36.37 | 0.02749 | Achromatic flint elements |
| SF2 (SCHOTT) | Flint | 1.64769 | 33.85 | 0.02954 | High-dispersion prisms |
| N-SF5 (SCHOTT) | Flint | 1.67270 | 32.25 | 0.03101 | Dispersive elements |
| N-SF6 (SCHOTT) | Flint | 1.80518 | 25.36 | 0.03943 | High-index flint |
| SF11 (SCHOTT) | Flint | 1.78472 | 25.77 | 0.03888 | Strong dispersion, high refractive index |
| N-LASF9 (lanthanum flint) | Flint | 1.85025 | 32.17 | 0.03108 | High-index, low-dispersion flint |
| Fused Silica | Crown | 1.45846 | 67.82 | 0.01475 | UV / deep UV, laser optics |
| CaF₂ (calcium fluoride) | Crystal | 1.43385 | 95.10 | 0.01052 | IR / UV windows |
| Sapphire (o-ray) | Crystal | 1.76817 | 72.30 | 0.01383 | Wear-resistant windows (n_e≈1.760) |
| FK51A (SCHOTT) | Crown | 1.48749 | 84.47 | 0.01184 | Apochromatic (APO) design |
Data sources and disclaimer
Disclaimer:This tool is intended only for preliminary selection and teaching reference in optical design and does not replace manufacturers’ official specification sheets. For production or critical optical systems, refer to the latest measured values in the material manufacturer’s datasheet. Infrared materials (Ge/Si/ZnSe) are opaque in the visible and valid only within their transparency ranges; nominal values for polymers such as PMMA / polycarbonate are approximate and vary considerably with composition and temperature.
Frequently asked questions (FAQ)
What is the Sellmeier equation, and how does it calculate refractive index?
The Sellmeier equation is a commonly used empirical formula describing how the refractive index of a transparent medium varies with wavelength (dispersion): n²(λ) = 1 + Σᵢ Bᵢ·λ²/(λ² − Cᵢ), where λ is in micrometres (µm) and Bᵢ, Cᵢ are material-specific coefficients. Given these six coefficients, the refractive index n(λ) at any wavelength can be calculated. More comprehensive than a single refractive-index value, it forms the basis of material libraries in optical design software such as Zemax and Code V.
What are the refractive indices n_d, n_F and n_C?
These are the refractive indices of the material at three Fraunhofer lines: the d line (helium yellow, 587.6 nm), the F line (hydrogen blue, 486.1 nm) and the C line (hydrogen red, 656.3 nm). n_d is the principal nominal value in glass catalogues; together with n_F and n_C it gives the Abbe number V_d for assessing dispersion.
How is the Abbe number V_d obtained from the refractive indices?
V_d = (n_d − 1) / (n_F − n_C). A larger V_d means lower material dispersion (crown glass) and a smaller V_d higher dispersion (flint glass). This library recalculates n_d, n_F and n_C from the same Sellmeier equation at 587.6 / 486.1 / 656.3 nm and then derives V_d, generally differing from the manufacturer’s stated value by ≤ 0.05.
Why can I not look up a refractive index for some materials in the visible?
Ge (germanium), Si (silicon), ZnSe (zinc selenide) and similar materials are infrared materials, opaque in the visible; the Sellmeier equation is valid only within their respective infrared transparency ranges (e.g. about 1.8–23 µm for Ge). A lookup at a visible wavelength returns ‘out of range’. Please switch to the infrared waveband.
Why is only one refractive index given for sapphire and MgF₂?
They are uniaxial birefringent crystals with two refractive indices, for the ordinary (o-ray) and extraordinary (e-ray) rays. This library uses the o-ray for MgF₂ and the o-ray for sapphire (sapphire n_e≈1.760); no e-ray Sellmeier coefficients are listed. If you need the e-ray, consult the manufacturer’s birefringence data.
Are the refractive indices of polymers accurate?
The refractive indices of polymers such as PMMA (acrylic) and polycarbonate (PC) vary considerably with composition, temperature, batch and additives, and their dispersion cannot be described accurately by a simple Sellmeier equation. The values given here are common nominal values (marked ‘approximate’) for preliminary design estimates only; use measured values for final selection.
How do I use this library to compare materials?
Click ‘Add to comparison’ in a material card’s details (up to 3 materials) to overlay their n(λ) dispersion curves in the comparison area, allowing direct comparison of the refractive-index levels and dispersion slopes of different materials in the same waveband. It is normal for infrared materials to have no curve in the visible range.
Are the data sources reliable, and can they be used directly for production design?
The coefficients come from the authoritative public source refractiveindex.info (based on original literature and manufacturers’ catalogues). The values are design references at room temperature under standard conditions and vary with temperature, stress and so on. For production or critical systems, always use the latest measured values from the material manufacturer’s datasheet; this tool provides no guarantee.


