Description
Product Overview
excelliSCAN 20 is a digital-encoder scanning galvo from SCANLAB of Germany, a global leader in laser scan systems. It has a 20 mm clear aperture, a scan angle of ±0.35 rad, repeatability <0.4 μrad, non-linearity <0.5 mrad/44°, marking speed <2.5 m/s and positioning speed <16 m/s. Position feedback is provided by a digital encoder and SCANahead feed-forward control is supported, making it suitable for laser marking, welding, cutting and other industrial applications.
Key Features
⚡ High-speed scanning performance
The marking speed reaches 2.5 m/s with a positioning speed of 16 m/s and a tracking error of only 0 ms. With SCANahead feed-forward control the galvo always runs at maximum acceleration, so no deceleration reserve has to be kept; contour accuracy stays very high during high-speed scanning, the corner-rounding effect on arcs is eliminated, and the scanner is especially suited to high-speed vector marking and filling.
🎯 High-precision positioning
Repeatability (RMS) is <0.4 μrad and non-linearity <0.5 mrad/44°. A high-resolution digital encoder provides position feedback, and closed-loop control eliminates the drift and hysteresis inherent in open-loop systems: gain drift <5 ppm/K, zero-point drift <10 μrad/K and 8-hour thermal drift <20 μrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation maintain outstanding positioning stability and process consistency over long continuous operation.
🌡️ Very low thermal drift
Fine optoelectronic sensing together with an advanced automatic thermal-drift compensation algorithm overcomes the thermal drift problem of scan heads. Zero-point thermal drift is only <10 μrad/K, gain thermal drift <5 ppm/K and long-term 8-hour drift <20 μrad, which meets the stability requirements of most long-duration, large-format marking and welding applications. Consistent processing quality is maintained even when the ambient temperature varies by ±10 °C.
🔧 dynAXIS digital encoder galvo motors
The scanner uses the latest SCANLAB dynAXIS se digital encoder galvo motor with a built-in 20-bit high-resolution encoder that provides 0.4 μrad positioning resolution. The encoder reads the rotor angle directly, eliminating the noise and drift of analog position detectors and enabling true closed-loop servo control. Peak torque is high and response is fast, so sub-microradian positioning accuracy is held even at full load.
📡 Digital servo driver board
A SCANLAB digital servo control board works with the 20-bit high-resolution encoder to provide fully digital closed-loop servo control. The driver board supports SCANahead feed-forward control, which substantially improves dynamic performance and processing accuracy, and it also provides comprehensive diagnostics and protection functions.
🔌 Interface compatibility
The scanner supports the SL2-100 standard communication protocol. SL2-100 provides 20-bit digital resolution (0.76 μrad) while XY2-100 provides 16-bit resolution (12 μrad). It is compatible with the vast majority of laser control cards on the market (JCZ EZCAD series, SCANLAB RTC series, RAYLASE SP-ICE series and others), ready to use and easy to integrate. Power requirement is 30 VDC / 3 A, and shielded interface cables effectively suppress external electromagnetic interference.
❄️ Efficient heat dissipation
Air cooling or water cooling can be selected. The water circuit covers the galvo mirror mount and the entrance aperture, the core heat zones, effectively controlling mirror temperature rise and preventing spot drift and focus shift caused by thermal lensing. Under high-power, long-duration continuous operation the water cooling keeps the scanner within its optimum temperature range and preserves consistent processing quality.
🛡️ High-reliability design
SCANLAB products strictly follow German manufacturing standards, and every unit undergoes full quality inspection and long-duration burn-in before shipment. Encoder versions support the iDRIVE extended diagnostic function, which monitors operating status, temperature and position deviation in real time for predictive maintenance. Protection class is IP50/IP56 depending on model, ensuring long-term reliability in industrial environments.
Technical Specifications
| Optical Parameters | |
|---|---|
| Clear aperture | 20 mm |
| Scan angle | ±0.35 rad |
| Maximum power handling | 1000 W |
| Mirror coating wavelengths | Full range of coatings available |
| Scanning Parameters | |
|---|---|
| Non-linearity | <0.5 mrad/44° |
| Tracking time | 0 ms |
| Repeatability (RMS) | <0.4 μrad |
| Marking speed | <2.5 m/s |
| Positioning speed | <16 m/s |
| Gain drift | <5 ppm/K |
| Zero-point drift | <10 μrad/K |
| 8-hour thermal drift (after 30 min warm-up) | <20 μrad |
| Electrical Parameters | |
|---|---|
| Power supply | 30 VDC / 3 A |
| Input signal protocol | SL2-100 |
| Cooling method | Air or water cooling, selectable |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25±10 °C |
| Dimensions (L x W x H) | 170 x 140 x 150 mm |
| Weight | 5.5 kg |
Operating Principle
A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors tilt the X-axis and Y-axis mirrors to direct the incoming laser beam to any point on the working plane, forming a two-dimensional scan field. A galvo motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque turns the rotor and mirror to the commanded angle. A position sensor (an analog position detector, APD, or a digital encoder) measures the rotor angle continuously and compares it with the commanded position to close the servo loop. Scanning speed depends on the dynamic response of the motor, and the tracking time characterises how far the scanner lags behind the command signal, which is the key indicator of high-speed performance.
Applications
Laser marking
Marking of text, patterns, 2D codes and serial numbers on metal and non-metal surfaces with high accuracy, high speed and durable results, widely used in electronic components, hardware tools and medical devices.
Laser welding
Suitable for precision welding such as overlap welding and spot welding of thin sheets, with a small heat-affected zone and little distortion, well matched to precision components.
Laser cutting
With a laser of appropriate power, precise cutting of thin metal and non-metal materials is possible, with a narrow kerf, high speed and good edge quality.
3D printing and additive manufacturing
Used for laser scanning in SLM/SLS metal additive manufacturing, precisely controlling energy distribution and scan path to ensure the quality of every sintered layer.
Precision micro-processing
Suitable for micro-structure processing in semiconductor, microelectronics and photonics applications such as micro-hole drilling, micro-channel etching and thin-film patterning.
Laser cleaning
With a high-power pulsed laser, used for selective removal of oxide layers, coatings and contamination from metal surfaces without damaging the substrate.
Research and education
Suitable for laser processing research in universities and institutes, and a common experimental tool in optical engineering, materials science and advanced manufacturing.
Selection Guide
When choosing a scan head, first determine the clear aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W and 20-30 mm above 500 W. Then choose the scanner class according to accuracy requirements: an economy 10C model covers about 90% of routine marking needs, a high-precision 14AW-III-Pro suits precision marking and welding, and for high-end applications German-imported scanners offer higher accuracy and stability, with the excelliSCAN series combining digital encoders and SCANahead control for the most demanding precision work. Scan speed and dynamic performance depend on the application: for marking, marking speed and writing speed are the main indicators, while for welding, welding speed and tracking error are the key parameters.
Model Comparison within the Series
| Model | Clear aperture | Tracking error | Marking speed | Positioning speed | Repeatability | Position feedback | Reference price |
|---|---|---|---|---|---|---|---|
| excelliSCAN 14 | 14 mm | 0 ms | <4 m/s | <30 m/s | <0.4 μrad | Digital encoder | On request |
| excelliSCAN 20 | 20 mm | 0 ms | <2.5 m/s | <16 m/s | <0.4 μrad | Digital encoder | On request |
| excelliSCAN 30 | 30 mm | 0 ms | <2 m/s | <11.2 m/s | <0.4 μrad | Digital encoder | On request |
About the Brand
SCANLAB of Germany is a leading global manufacturer of laser scanning galvo systems, founded in 1990 and headquartered in Munich. Its portfolio ranges from the entry-level basiCube to the flagship excelliSCAN, widely used in laser marking, welding, cutting, micro-processing and additive manufacturing. With innovative SCANahead control technology and dynAXIS digital encoder galvo motors, SCANLAB continues to lead the industry in accuracy, stability and dynamic performance.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
We provide professional scan head selection advice and complete system integration solutions. Please call us for a consultation.





Reviews
There are no reviews yet.