QQ: 859818709

360° Rotating Galvo Neck for Fiber Laser Marking Machines, Beam Expander to Scanner

360° Rotating Galvo Neck for Fiber Laser Marking Machines, Beam Expander to Scanner

Price on request
Category:

Description

Product Overview

The 360° rotatable galvo neck for fiber marking machines is the rotary connecting part between the beam expander and the galvo scanner. It allows the scanner to rotate freely through a full 360°, so laser marking can be carried out from many angles and in many directions. The marking direction can be changed without removing the galvo scanner, which greatly improves production efficiency and equipment flexibility.

Key Features

  • 360° rotation without dead angle for multi-angle marking
  • Rotary locking mechanism for reliable positioning
  • Fits the standard galvo interface of fiber laser marking machines
  • High coaxiality, minimal beam path offset
  • Direction can be adjusted without removing the galvo scanner

Technical Specifications

Parameter Specification
Type 360° rotatable galvo neck (rotary adapter between the beam expander and the galvo scanner)
Rotation range 360°, continuous, no dead angle
Locking Rotary locking mechanism for reliable positioning after adjustment
Interface Standard galvo interface of fiber laser marking machines
Coaxiality High coaxiality, minimal beam path offset
Operation Marking direction can be changed without removing the galvo scanner
Application Fiber laser marking machines, multi-angle and multi-direction marking

Applications

Side face marking of large sheet metal parts and enclosures, marking of parts that cannot easily be turned over on the worktable, and multi-station marking where the head has to be turned toward different fixtures. Because the direction is changed by rotating the neck instead of re-clamping the workpiece, setup time on mixed batches is shortened and the machine stays productive.

Selection Guide

  • Confirm the mounting thread and aperture of the beam expander and the galvo scanner before ordering, so the neck matches the interface of your scan head.
  • The neck is an optical path part: keep the inner surface clean and capped during installation, and never touch the optical surfaces with bare hands.
  • After turning to the required direction, lock the rotary mechanism before marking, so the position cannot drift during long runs.
  • For heavy scan heads or long field lenses, check the mechanical load on the joint and support the head if necessary.

FAQ

Does the rotating neck affect marking accuracy?
The neck is machined to high coaxiality, so normal rotation causes only minimal beam path offset. Lock the mechanism after adjustment and check the focus once when the direction has been changed.

Can the marking direction be changed while the machine is running?
No. Stop marking and, where applicable, switch off the laser before turning the neck, then lock it and re-check the red pointer position.

Which machines does it fit?
It fits fiber laser marking machines that use the standard galvo interface. Please send us the model of your scan head and beam expander if you are unsure about the thread or aperture.

Disclaimer

The information on this page is compiled from the manufacturer’s public information and existing product documentation and is provided for selection reference only. Appearance, interface dimensions and configuration may change between batches; the item delivered prevails. Please confirm compatibility with your scan head before ordering.

Selection support: Soar Laser, hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “360° Rotating Galvo Neck for Fiber Laser Marking Machines, Beam Expander to Scanner”

Your email address will not be published. Required fields are marked *

中文EN