Description
Product Overview
The heavy-duty roller rotary fixture is designed for laser processing of large and heavy cylindrical workpieces, with a D80 chuck of 80 mm diameter. The rotary fixture uses a quality cast iron three-jaw chuck with moderate hardness, stable clamping, accurate positioning, smooth running and a low friction coefficient. It supports stepless tilt adjustment from 0° to 90° with manual locking, adapting flexibly to different processing angles. An industrial standard aviation connector makes it compatible with most fiber laser marking machine control boards, plug and play. A stepper motor and driver plus timing belt transmission are supplied as standard for smooth, quiet operation, making it an ideal rotary accessory for cylindrical laser marking, welding and cutting.
Key Features
-
🔩 Quality Cast Iron Three-Jaw Chuck
A high-grade cast iron three-jaw self-centering chuck with moderate hardness, uniform clamping force and high positioning accuracy. The three jaws move in synchronism so the workpiece self-centers with no manual jaw-by-jaw adjustment, greatly improving clamping efficiency. The chuck surface is finely machined for smooth running and a low friction coefficient, and resists wear over long service. -
📐 Stepless Multi-Angle Adjustment
Stepless tilt adjustment from 0° to 90° with stable manual locking. 0° is horizontal, 90° is vertical, and any intermediate angle can be locked. This flexibility covers cups, tubes, ring-shaped parts and other workpiece shapes, so one fixture serves many jobs. -
🔌 Industrial Standard Aviation Connector
The industrial standard aviation connector is directly compatible with the control boards of most fiber laser marking and engraving machines. Plug and play, with no extra modification or rewiring, which shortens system integration time and cost. -
⚙️ Stepper Motor with Timing Belt Drive
Fitted with a 42×40 mm stepper motor and a DM420 driver, the timing belt drive gives a 2.5:1 reduction for high torque and smooth rotation. Belt drive keeps noise and vibration low, so marking accuracy stays consistent throughout rotation. A through hole of Ø16 mm lets long shafts pass through for processing. -
🔧 Easy Mounting
Mounting holes of 80 × 50 mm (M5) allow direct installation on the laser machine worktable. The axis height of 85 mm works with a lift table for precise focus adjustment. The heavy-duty structure gives higher load capacity for large diameter tubes and heavy workpieces.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | D80 rotary fixture |
| Chuck Specification | D80 mm three-jaw self-centering chuck |
| Clamping Range A (external) | 2 – 22 mm |
| Clamping Range B (internal) | 25 – 70 mm |
| Clamping Range C (reverse jaws) | 22 – 63 mm |
| Tilt Adjustment | 0° – 90° |
| Motor | 42×40 mm stepper motor |
| Driver | DM420 driver |
| Transmission | Timing belt, 2.5:1 reduction |
| Through Hole Diameter | Ø16 mm |
| Axis Height | 85 mm |
| Dimensions | 190 × 100 × 150 mm |
| Mounting Holes | 80 × 50 mm (M5) |
| Weight | 4.6 kg |
| Interface | Industrial standard aviation connector |
Operating Principle
The rotary fixture drives the three-jaw chuck through a stepper motor and works in step with the galvo motion of the marking machine to mark cylindrical workpieces around the full 360°. The galvo scanner scans along the X axis while the fixture indexes in the rotation direction, and together they cover the whole cylindrical surface. The chuck offers three clamping modes, external (A), internal (B) and reverse jaws (C), to suit workpieces of different shapes and sizes. The 2.5:1 timing belt reduction provides enough torque together with fine angular resolution, which is what keeps marking quality consistent. During installation, make sure the rotation axis is perpendicular to the laser beam and that the axis height matches the focal height.
Applications
- Laser marking on the cylindrical surface of stainless steel vacuum flasks
- Laser engraving of rings, bracelets and other jewelry
- Laser lettering on pen barrels and tubular parts
- Laser marking of bearing inner and outer rings
- Assisted rotation for laser welding of valves and flanged pipe fittings
Selection Guide
When choosing a rotary fixture, first confirm the maximum workpiece diameter: the chuck size should be larger than the workpiece diameter. D69 suits small workpieces (rings, pen barrels and similar), D80 suits medium workpieces (vacuum flasks, small tubes), and D100/D125 suit large workpieces (large diameter tubes, bearings and similar). The E version is standard, the F version is reinforced (higher torque), the C version is compact, and the low-profile version suits machines with limited Z-axis space. Roller types suit slender workpieces that cannot be held in a chuck. Confirm that the drive interface of your machine control board is compatible before ordering.
Same Series Comparison
| Model | Chuck Diameter | Clamping Range (external) | Tilt | Weight |
|---|---|---|---|---|
| D69E | Ø69 mm | 1 – 20 mm | 0° – 90° | 3.2 kg |
| D80E | Ø80 mm | 2 – 22 mm | 0° – 90° | 4.6 kg |
| D100E | Ø100 mm | 2 – 30 mm | 0° – 90° | 7.0 kg |
| D125E | Ø125 mm | 2.5 – 40 mm | 0° – 90° | 9.5 kg |
About the Brand
Changsha Soar Laser Equipment Co., Ltd. specializes in the development and manufacture of laser processing machine accessories, focusing on laser rotary fixtures, optical benches and laser accessories. The company is known for high precision, high stability and good cost performance. Its products are widely used to upgrade fiber laser marking machines, laser welding machines and similar equipment, and are trusted by laser equipment makers and end users at home and abroad.
Contact Us
For more product information or a quotation, please contact our technical sales team:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn
We provide professional technical selection support, volume purchase discounts and comprehensive after-sales service.








Reviews
There are no reviews yet.