Description
Au3Tech FTC6110 Capacitive Height Controller
1. Product Overview
The FTC6110 is a laser focus following controller from Wuhan Au3Tech Intelligent Electric Control Technology Co., Ltd. (AU3TECH), aimed mainly at low and medium power fiber laser and CO₂ laser cutting applications. The FTC6110 uses capacitive sensing to track and adjust the distance between the cutting head and the workpiece in real time, keeping the cut point at the optimum focus position. This greatly improves cut quality and speed and reduces material waste. The controller uses position loop motor control and supports both stepper and servo motors. It is supplied with a preamplifier and a 128×64 LCD display, and offers high detection accuracy (0.02 mm), fast response (2 ms) and strong noise immunity, making it an economical Z axis height control solution for low and medium power laser cutting machines.
2. Key Features
- High-accuracy capacitive sensing: 0.02 mm detection accuracy and 1 kHz sampling rate for reliable focus tracking
- Fast response: 2 ms response time with a following speed of up to 20 m/min
- Position loop motor control: stepper or servo motors with pulse plus direction control for good compatibility
- Best performance with pulse-driven motors: faster response and higher following accuracy when paired with pulse type stepper or servo motors
- Rich external IO: 6 input signals (calibration, follow, up / down, upper limit, lower limit) for easy integration with different CNC systems
- Industrial EMC design: effective shielding against on-site electromagnetic interference, with support for small following distances (0.2-5 mm)
- LCD display: 128×64 dot matrix panel showing operating status in real time, with on-line parameter setting
- Preamplifier: standard preamplifier improves the signal-to-noise ratio and sensitivity of the capacitive signal
3. Technical Specifications
| Parameter | Specification |
|---|---|
| Application | Fiber / CO₂ laser cutting |
| Independent Z axis control | Yes |
| Operating voltage (V) | 18-36 |
| Operating current (mA) | ≤150 |
| Motor type | Servo or stepper motor |
| Motor control mode | Pulse + direction |
| Detection accuracy (mm) | 0.02 |
| Sampling frequency (kHz) | 1 |
| Response time (ms) | 2 |
| Following range (mm) | 0.2-5 |
| Average following speed (m/min) | 20 |
| Preamplifier | Standard |
| Display | 128×64 LCD |
| Controller dimensions (mm) | 190×120×36 |
| Amplifier dimensions (mm) | 44×39×26 |
| Input signals | Calibration, follow, up, down, upper limit, lower limit (6 channels) |
| Output signals | Motor pulse / direction, alarm, following position, piercing position |
4. Operating Principle
The FTC6110 works on the principle of capacitive sensing. The preamplifier is mounted close to the cutting head and forms one plate of a capacitive sensor together with the cutting nozzle, while the metal workpiece forms the other plate. When the distance between the cutting head and the workpiece changes, the capacitance between the plates changes accordingly. A high-performance capacitive measurement IC (German-made chip) detects this very small capacitance change in real time; a 32-bit ARM Cortex-M3 processor calculates the current height deviation at high speed and drives the Z axis stepper or servo motor through pulse and direction signals to move the cutting head back to the preset following distance. The complete detect, compute and actuate loop responds in only 2 ms, which keeps the focus position accurately tracked during high-speed cutting.
5. Applications
- Low and medium power fiber laser cutting — Z axis following control on 1-4 kW fiber laser flat bed cutting machines
- CO₂ laser cutting — automatic focus height tracking on CO₂ laser cutting machines
- Tube laser cutting — focus tracking for tube cutting with a rotary fixture
- High-speed thin sheet cutting — keeps the focus stable to improve cut quality
- Corrugated sheet cutting — adaptive height tracking on irregular surfaces
- Small format cutting machines — Z axis height control for economical laser cutting equipment
- Laser engraving — automatic maintenance of focus height on laser engraving machines
6. Selection Guide
The FTC6110 suits low and medium power (1-4 kW) fiber and CO₂ laser cutting applications and offers strong value for money. For medium and high power (3-15 kW) high-speed cutting we recommend the FTC10 (0.01 mm detection accuracy, 2 kHz sampling rate, 1 ms response time). If a pure analog output is required, choose the FTC10S. Performance is best when used with the Au3Tech SC2000E cutting bus system.
7. Series Comparison
| Model | Power range | Detection accuracy | Sampling frequency | Response time | Motor control | Communication |
|---|---|---|---|---|---|---|
| FTC6110 | Low to medium power | 0.02 mm | 1 kHz | 2 ms | Position loop (pulse + direction) | IO signals |
| FTC10 | Medium to high power | 0.01 mm | 2 kHz | 1 ms | Velocity loop + analog | Ethernet / RS485 |
| FTC10S | Medium to high power | 0.01 mm | 2 kHz | 1 ms | Analog output only | — |
8. About the Brand
Wuhan Au3Tech Intelligent Electric Control Technology Co., Ltd. (AU3TECH) is a high-tech company specializing in the development of CNC systems for laser processing, headquartered in Wuhan. The company focuses on the development and production of laser cutting control systems, capacitive height controllers and laser cutting bus systems. Its product range covers the FTC series capacitive height controllers, the SC series laser cutting control systems and the MCC series cutting control cards, widely used in fiber laser cutting and CO₂ laser cutting. The company has earned broad market recognition for cost effectiveness and reliable quality.
9. Contact Us
For more product information, technical data sheets or selection advice, please contact us:
📞 Hotline: +86 159-2722-0467 (same number on WeChat)
Changsha Soar Laser Equipment Co., Ltd. — authorized Au3Tech distributor, genuine factory products, quality assured.









Reviews
There are no reviews yet.