Description
Product Overview
The intelliSCAN III 30 is a third-generation intelligent high-power scanning galvo head from SCANLAB (Germany), the world leading manufacturer of laser scan systems. The head has a 30 mm aperture, a scan angle of ±0.35 rad, repeatability better than 2 μrad, non-linearity below 0.9 mrad/44°, a marking speed of 0.7 m/s and a positioning speed of 9 m/s, and is widely used in laser marking, welding and cutting in industrial production.
Key Features
⚡ High-Speed Scanning Performance
The marking speed reaches 0.7 m/s and the positioning speed 9 m/s, with a tracking error of only 0.55 ms. The optimised servo control algorithm guarantees smooth switching between high-speed jumps and low-speed marking, and the short response time for small steps keeps marking quality high even during fast jump marking.
🎯 High-Precision Positioning
Repeatability (RMS) is better than 2 μrad, non-linearity below 0.9 mrad/44°, gain drift below 15 ppm/K, zero drift below 15 μrad/K and 8-hour thermal drift below 100 μrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic temperature-drift compensation keep positioning stability and process consistency outstanding during long continuous operation.
🌡️ Ultra-Low Thermal Drift
Fine optoelectronic sensing and an advanced automatic thermal-drift compensation algorithm effectively overcome the thermal drift problem of scan heads. Zero-point thermal drift is only 15 μrad/K, gain thermal drift below 15 ppm/K and long-term 8-hour drift below 100 μrad, meeting the stability requirements of the vast majority of long-duration, large-volume marking and welding applications. Consistent process quality is maintained even when the ambient temperature fluctuates by ±10 °C.
🔧 dynAXIS Series High-Performance Galvo Motors
The head uses dynAXIS series high-performance galvo motors whose rotors employ high-energy-density permanent magnets together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver excellent dynamic response while maintaining scanning accuracy, and hold a stable output during long continuous runs.
📡 High-Precision Analog/Digital Servo Driver Board
The SCANLAB high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit with first-tier international brand components, and every unit is aged for 360 hours before shipment, ensuring long-term reliable operation even in harsh electromagnetic environments.
🔌 Interface Compatibility
The head supports the SL2-100/XY2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad). It is compatible with the vast majority of laser control cards on the market (such as JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series) and is plug-and-play, making system integration quick and efficient. Power supply requirement is 30 V DC/6 A, and the interface cable is shielded to suppress external electromagnetic interference.
❄️ Efficient Cooling System
Air cooling or water cooling is available. The water circuit covers the core heat zones such as the mirror mount and the entrance aperture, effectively controlling mirror temperature rise and preventing spot drift and focus shift caused by thermal lensing. Under high-power, long-duration continuous operation the water cooling system keeps the head within its optimum temperature range and preserves consistent process quality.
🛡️ High-Reliability Design
SCANLAB products strictly follow German manufacturing standards, and every unit undergoes comprehensive quality inspection and long-term ageing verification before shipment. Protection class is IP50/IP56 depending on model, ensuring long-term reliable operation in industrial environments.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Aperture | 30mm |
| Scan angle | ±0.35 rad |
| Max. input power | 5000W |
| Mirror coating wavelength | Full range of coatings available |
| Scanning Parameters | |
|---|---|
| Non-linearity | <0.9mrad/44° |
| Tracking time | 0.55ms |
| Repeatability (RMS) | <2μrad |
| Marking speed | <0.7m/s |
| Positioning speed | <9m/s |
| Gain drift | <15ppm/K |
| Zero drift | <15μrad/K |
| 8-hour thermal drift (after 30 min warm-up) | <100μrad |
| Electrical Parameters | |
|---|---|
| Power supply | 30V DC/6A |
| Input signal protocol | SL2-100/XY2-100 |
| Cooling | Air-cooled / water-cooled optional |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25±10 °C |
| Dimensions (L×W×H) | 230x180x200mm |
| Weight | 5.8kg |
Operating Principle
A laser scan system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, directing the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds a control current into the motor coil, the electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (analog position detector APD or digital encoder) continuously measures the rotor angle and compares it with the command to close the servo loop. Scanning speed depends on the dynamic response of the motor, and the tracking time characterises how far the head lags the command signal — a key indicator of high-speed performance.
Applications
Laser marking
Suitable for marking text, patterns, 2D codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in electronic components, hardware tools and medical devices.
Laser welding
Used for precision welding such as lap welding of thin sheets and spot welding, with a small heat-affected zone and little distortion, making it suitable for precision components.
Laser cutting
Together with a laser of appropriate power, it enables precision cutting of thin metal and non-metal materials with a narrow kerf, high speed and good edge quality.
3D printing / additive manufacturing
Used for laser scanning in SLM/SLS metal additive manufacturing, precisely controlling the laser energy distribution and scan path to ensure the sintering quality of every layer.
Precision micromachining
Suitable for precision micro-structure processing in semiconductors, microelectronics and photonics, such as micro-hole drilling, micro-channel etching and thin-film patterning.
Laser cleaning
Together with high-power pulsed lasers, it selectively removes oxide layers, coatings and contamination from metal surfaces without damaging the substrate.
Research and education
Suitable for laser processing experiments in universities and research institutes, and a common laboratory tool in optical engineering, materials science and advanced manufacturing.
Selection Guide
When choosing a scan head, first determine the aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W, and 20-30 mm above 500 W. Then choose the head grade according to the accuracy requirement: the economy 10C model meets 90% of routine marking needs; the high-precision 14AW-III-Pro suits precision marking and welding; for high-end applications, German-imported heads offer higher accuracy and stability, and the excelliSCAN series with digital encoders and SCANahead control technology suits the most demanding precision processing. Scanning speed and dynamic performance depend on the application: marking is judged mainly by marking speed and writing speed, while welding is judged by welding speed and tracking error.
Series Comparison
| Model | Aperture | Tracking error | Marking speed | Repeatability | Position detection | Max. laser power | Price |
|---|---|---|---|---|---|---|---|
| intelliSCAN IV 10 | 10mm | 0.11ms | <3.5m/s | <2μrad | Analog APD | 150W | Request a quote |
| intelliSCAN se 14 | 14mm | 0ms | <4m/s | <0.4μrad | Digital encoder | 500W | Request a quote |
| intelliSCAN 14 | 14mm | 0.32ms | <1.0m/s | <2μrad | Analog APD | 500W | Request a quote |
| intelliSCAN 20 | 20mm | 0.32ms | <1.0m/s | <2μrad | Analog APD | 1000W | Request a quote |
| intelliSCAN 30 | 30mm | 0.55ms | <0.7m/s | <2μrad | Analog APD | 5000W | Request a quote |
| intelliSCAN III 10 | 10mm | 0.11ms | <3.5m/s | <2μrad | Analog APD | 150W | Request a quote |
| intelliSCAN III 20 | 20mm | 0.32ms | <2.0m/s | <2μrad | Analog APD | 2000W | Request a quote |
| intelliSCAN III 30 | 30mm | 0.55ms | <0.7m/s | <2μrad | Analog APD | 5000W | Request a quote |
About the Brand
SCANLAB GmbH, based in Munich, Germany, is a world leading manufacturer of laser scanning galvo systems. Its product line spans the whole range from the entry-level basiCube to the flagship excelliSCAN, and is widely used in laser marking, welding, cutting, micromachining and additive manufacturing. With the innovative SCANahead control technology and dynAXIS digital-encoder galvo motors, SCANLAB consistently leads the industry with outstanding precision, stability and dynamic performance.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
We provide professional scan head selection advice and complete system integration solutions. Website: www.soar-laser.cn





Reviews
There are no reviews yet.