QQ: 859818709

Synrad 48-Series Laser Closed Loop System, ±2% Stability

Synrad 48-Series Laser Closed Loop System, ±2% Stability

Price on request
SKU: SYNRAD-CL48
Category: ,

Description

Synrad 48-Series Laser Closed Loop System, ±2% Stability

The 48 Series Laser Closed Loop System provides fully dynamic power closed-loop control for Synrad 48-series CO2 lasers: the beam sampler and closed-loop control hardware are installed at the factory and work with the UC-2000 laser controller. An internal beam splitter in the sampler diverts about 8% of the output beam through a diffuser plate into a thermo-pile detector, and the signal is amplified to 1–12 V inside the sampler; the controller then generates a 5 kHz PWM signal of variable duty cycle, holding the laser average power at the set point with a typical stability of ±2%. Price on request (call +86 159 2722 0467).

Key Specifications at a Glance

Parameter Specification
Compatible lasers Synrad 48-series CO2 lasers
Typical power stability ±2%
Sampling method Internal beam splitter diverts 8% of the beam → diffuser plate + thermo-pile detector
Signal Detector signal amplified to 1–12 V
Power supply 24 VDC (wall adapter)
Control frequency 5 kHz (standard); customisable 20 kHz to reduce light ripple
Set-point range Approx. 20%–80% of full power
Servo settling time Approx. 2 ms (to 90% of final value)

Key Features

  • Fully dynamic power regulation: the closed loop holds average power at the set point, typically ±2% — significantly better than the cold-start drift of open-loop operation.
  • Factory-installed: the beam sampler and associated hardware come pre-mounted and pre-aligned; on site you only connect the UC-2000 and 24 VDC supply.
  • Seamless with the UC-2000: using the controller’s closed-loop modes (MANUAL CLOSED / ANV CLOSED), the set point is adjustable to roughly 20%–80% of full power.
  • External gating: within the system’s dynamic response time, the UC-2000 can be gated on/off by an external low-frequency signal source.
  • Optional 20 kHz control frequency: can be raised to 20 kHz as a custom project to further reduce output light ripple.

Applications

Power-stability-sensitive CO2 processing: precision marking, cutting and drilling of films/flexible materials, medical device manufacturing, and production lines that must run unattended for long periods without power drift.

Detailed Technical Specifications

Parameter Specification
Compatible lasers Synrad 48 series
Typical stability ±2%
Sampling ratio 8% of output beam (internal beam splitter)
Detector Thermo-pile + diffuser plate
Detector signal 1–12 V (amplified inside the sampler)
Control signal 5 kHz variable-duty PWM (UC-2000)
Custom control frequency Upgradeable to 20 kHz (reduces light ripple)
Power supply 24 VDC wall adapter
Set-point range Approx. 20%–80% of full power
Servo settling time Approx. 2 ms (90%)

Outline & Mounting Drawing

The manufacturer’s technical outline & mounting drawing below is provided for machine structural and installation design; click to download the original PDF.

48-Series Closed Loop System Outline & Mounting Drawing (download PDF)

Downloads

The documents below come from the manufacturer’s (Novanta / Synrad) official public materials; specifications are subject to the manufacturer’s datasheets. For selection support or full manuals, please call +86 159 2722 0467.

Frequently Asked Questions (FAQ)

Q: What does the closed-loop system include?

A: A beam sampler (with internal beam splitter, diffuser plate, thermo-pile detector and amplifier circuit) plus the associated control hardware, factory-installed on 48-series lasers and used with the UC-2000 controller’s closed-loop modes.

Q: Why can stability reach ±2%?

A: The sampler continuously taps 8% of the output beam into the thermo-pile detector; the controller corrects the PWM duty cycle at every 5 kHz cycle, compensating drift from the light source and temperature in real time; servo settling time is about 2 ms.

Q: Can it be used with other series?

A: This closed-loop system is designed and factory-preinstalled for the 48 series; other series or a higher control frequency (20 kHz) are custom projects — please call to discuss.

Related Products

Disclaimer

Parameters on this page are excerpted from official public materials of Novanta / Synrad (datasheets/product manuals) and are provided for selection reference only; the manufacturer’s latest specification sheets prevail. Changsha Soar Laser Equipment Co., Ltd. supplies Novanta brands including Synrad and Cambridge Technology with selection support. Price on request — call +86 159 2722 0467 or e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “Synrad 48-Series Laser Closed Loop System, ±2% Stability”

Your email address will not be published. Required fields are marked *

中文EN