Description
Synrad 48-Series Laser Closed Loop System, ±2% Stability
The 48 Series Laser Closed Loop System provides fully dynamic power closed-loop control for Synrad 48-series CO2 lasers: the beam sampler and closed-loop control hardware are installed at the factory and work with the UC-2000 laser controller. An internal beam splitter in the sampler diverts about 8% of the output beam through a diffuser plate into a thermo-pile detector, and the signal is amplified to 1–12 V inside the sampler; the controller then generates a 5 kHz PWM signal of variable duty cycle, holding the laser average power at the set point with a typical stability of ±2%. Price on request (call +86 159 2722 0467).
Key Specifications at a Glance
| Parameter | Specification |
|---|---|
| Compatible lasers | Synrad 48-series CO2 lasers |
| Typical power stability | ±2% |
| Sampling method | Internal beam splitter diverts 8% of the beam → diffuser plate + thermo-pile detector |
| Signal | Detector signal amplified to 1–12 V |
| Power supply | 24 VDC (wall adapter) |
| Control frequency | 5 kHz (standard); customisable 20 kHz to reduce light ripple |
| Set-point range | Approx. 20%–80% of full power |
| Servo settling time | Approx. 2 ms (to 90% of final value) |
Key Features
- Fully dynamic power regulation: the closed loop holds average power at the set point, typically ±2% — significantly better than the cold-start drift of open-loop operation.
- Factory-installed: the beam sampler and associated hardware come pre-mounted and pre-aligned; on site you only connect the UC-2000 and 24 VDC supply.
- Seamless with the UC-2000: using the controller’s closed-loop modes (MANUAL CLOSED / ANV CLOSED), the set point is adjustable to roughly 20%–80% of full power.
- External gating: within the system’s dynamic response time, the UC-2000 can be gated on/off by an external low-frequency signal source.
- Optional 20 kHz control frequency: can be raised to 20 kHz as a custom project to further reduce output light ripple.
Applications
Power-stability-sensitive CO2 processing: precision marking, cutting and drilling of films/flexible materials, medical device manufacturing, and production lines that must run unattended for long periods without power drift.
Detailed Technical Specifications
| Parameter | Specification |
|---|---|
| Compatible lasers | Synrad 48 series |
| Typical stability | ±2% |
| Sampling ratio | 8% of output beam (internal beam splitter) |
| Detector | Thermo-pile + diffuser plate |
| Detector signal | 1–12 V (amplified inside the sampler) |
| Control signal | 5 kHz variable-duty PWM (UC-2000) |
| Custom control frequency | Upgradeable to 20 kHz (reduces light ripple) |
| Power supply | 24 VDC wall adapter |
| Set-point range | Approx. 20%–80% of full power |
| Servo settling time | Approx. 2 ms (90%) |
Outline & Mounting Drawing
The manufacturer’s technical outline & mounting drawing below is provided for machine structural and installation design; click to download the original PDF.
48-Series Closed Loop System Outline & Mounting Drawing (download PDF)
Downloads
The documents below come from the manufacturer’s (Novanta / Synrad) official public materials; specifications are subject to the manufacturer’s datasheets. For selection support or full manuals, please call +86 159 2722 0467.
- 48-Series Closed Loop System Datasheet (PDF)
- 48-Series Closed Loop System Outline & Mounting Drawing (Drawing, PDF)
Frequently Asked Questions (FAQ)
Q: What does the closed-loop system include?
A: A beam sampler (with internal beam splitter, diffuser plate, thermo-pile detector and amplifier circuit) plus the associated control hardware, factory-installed on 48-series lasers and used with the UC-2000 controller’s closed-loop modes.
Q: Why can stability reach ±2%?
A: The sampler continuously taps 8% of the output beam into the thermo-pile detector; the controller corrects the PWM duty cycle at every 5 kHz cycle, compensating drift from the light source and temperature in real time; servo settling time is about 2 ms.
Q: Can it be used with other series?
A: This closed-loop system is designed and factory-preinstalled for the 48 series; other series or a higher control frequency (20 kHz) are custom projects — please call to discuss.
Related Products
- Synrad UC-2000 CO2 Laser Controller
- Synrad 48-1 10.6 μm Air-Cooled 10 W CO2 Laser
- Synrad PS Series CO2 DC Power Supplies
Disclaimer
Parameters on this page are excerpted from official public materials of Novanta / Synrad (datasheets/product manuals) and are provided for selection reference only; the manufacturer’s latest specification sheets prevail. Changsha Soar Laser Equipment Co., Ltd. supplies Novanta brands including Synrad and Cambridge Technology with selection support. Price on request — call +86 159 2722 0467 or e-mail 859818709@qq.com.







Reviews
There are no reviews yet.