Description
Product Overview
The FTC10 is the core of Au3Tech follow-up control for medium and high power laser cutting: capacitive sensing measures the nozzle-to-sheet gap in real time, and the controller resolves the deviation with 0.01 mm resolution at a 2 kHz sampling rate, outputting a 0-10 V analogue signal that drives the Z axis servo in follow-up. Ethernet and RS485 communication allow parameters to be read and written remotely, giving stable follow-up through piercing and the whole cut – a proven capacitive height control solution for cutting heads.
Key Features
- 0.01 mm resolution: fine gap detection with high follow-up accuracy
- 2 kHz sampling: fast response, no collision with the sheet during piercing
- Dual communication interfaces: Ethernet plus RS485 for remote parameter management
- 0-10 V output: drives Z axis servo or stepper directly, high compatibility
- Suited to medium and high power: stable with the nozzle capacitance circuit of high power cutting heads
Technical Specifications
| Brand | Au3Tech |
| Model | FTC10 |
| Type | Capacitive height controller |
| Resolution | 0.01 mm |
| Sampling rate | 2 kHz |
| Follow-up response | 1 ms class |
| Communication | Ethernet / RS485 |
| Analogue output | 0-10 V |
| Power supply | 24 V ±10%, ≤200 mA |
Applications
Follow-up control for medium and high power fiber laser cutting machines, flat sheet cutting and bevel cutting. The same unit also suits comparable processing tasks in similar conditions; custom versions and volume solutions can be discussed, and drawings or process requirements can be provided for a detailed evaluation.
Selection Guide
- When selecting a height controller or control card, first check the cutting head interface type and the laser power class: analogue and pulse versions are not signal compatible, so provide the cutting head model before ordering.
- Follow-up calibration is required after installation, with the calibration height set according to the nozzle type and the sheet combination. A recheck is recommended after changing a sheet batch or a nozzle.
- Models in the same series differ in power handling, clear aperture, interfaces and function modules. For volume purchase or production line matching, samples and a solution evaluation can be requested.
- This is genuine factory stock, supplied with a packing list and warranty document; warranty and spare parts support are provided from the date of receipt as agreed, excluding consumables such as lenses and seals.
- This model is the Au3Tech FTC10 capacitive height controller with 0.01 mm accuracy; key specifications are in the table below. If you need a higher power, a larger aperture or a different interface or focal length version, contact us for a series comparison and quotation.
Usage Precautions
- Never look into the beam or specular reflections while the laser is running. Mark the work area with warning signs and guarding, and wear protective goggles matched to the wavelength.
- Use purified or deionized water in the water cooling circuit and replace it regularly. If a water temperature or flow alarm occurs, stop the machine and find the cause before restarting.
- Electrical wiring and servicing must be carried out by a licensed electrician with the power off and a lockout tag fitted. The equipment must be reliably earthed to prevent electric shock and interference.
- Protect the equipment from moisture and dust during transport and storage. Before long-term shutdown, drain the water circuit, disconnect the power and cover the unit against dust.
- Route signal and encoder cables away from power cables and earth the shield at one end only; record the parameters after calibration for future reference.
- On arrival, check the model nameplate and the accessory list first. If you meet any problem during installation or commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
What is the difference between the FTC10 and the FTC10S?
The FTC10 has Z axis control and digital communication for full functionality; the FTC10S is a purely analogue simplified version without Z axis control, suited to systems that already have a separate height control axis.
Is an amplifier needed?
The FTC10 must be used with the capacitance circuit of the cutting head (including the preamplifier); connect the nozzle and the insulating ring as described in the manual.
How is calibration done?
A calibration routine is built in: set the reference surface for the follow-up height and calibrate with one key press. The detailed steps are in the manual supplied with the unit.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public material and existing documents and are for selection reference only. Specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with batch, so please confirm with our support team before ordering. Reproduction of the content of this page without written permission is prohibited.
Selection advice: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.