Description
Product Overview
The FTC10S is the simplified, pure analog version of the Au3Tech FTC series height controller: it outputs a 0-10 V analog following signal without Z axis control or digital communication, which suits machine architectures where the Z axis is controlled by the machine tool CNC system itself. An OLED display shows the current gap and status, one-key calibration covers a 0.2-10 mm following range, the micro-gap mode starts from a minimum of 0.2 mm, and dynamic following accuracy is 0.05 mm. The interface is simple and the unit is ready to use once connected.
Key Features
- Pure analog output: 0-10 V connects directly to the machine Z axis, for a simple architecture
- No Z axis control: suits machines whose following loop is closed by the CNC system
- OLED display: shows the gap and working status in real time
- One-key calibration: fast calibration over the 0.2-10 mm range
- Micro-gap mode: from 0.2 mm minimum, friendly to precision cutting of thin sheet
Technical Specifications
| Brand | Au3Tech AU3TECH |
| Model | FTC10S |
| Type | Capacitive height controller (analog version) |
| Output | Analog (no Z axis control) |
| Display | OLED |
| Calibration | One-key calibration, 0.2-10 mm |
| Micro-gap | From 0.2 mm |
| Dynamic accuracy | 0.05 mm |
Applications
Laser cutting machines whose Z axis is controlled by the CNC system, and following control for precision cutting of thin sheet. It also fits similar machining requirements under comparable working conditions; customised and volume solutions can be discussed, and drawings or process requirements can be provided for a detailed evaluation.
Selection Guide
- When selecting a height controller or control card, first check the cutting head interface type and the laser power range: analog and pulsed versions do not share the same signals, so provide the cutting head model for verification before ordering.
- Following calibration is required after installation, and the calibration height is set according to the nozzle model and sheet combination; it is advisable to recheck once after changing the sheet batch or the nozzle.
- Models in the same series differ in power, clear aperture, interface and function modules; for volume purchases or production line matching, samples for trial and a solution evaluation can be requested.
- This is a genuine original product; the packing list and warranty certificate are supplied with the goods, and warranty and spare part support are provided from the date of receipt as agreed, excluding consumables such as lenses and seals.
- This item is the Au3Tech FTC10S capacitive height controller, with key specifications in the table above; if you need a higher power, a larger aperture or a different interface or focal length version, contact customer service for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or specular reflections while the laser equipment is running; set warning signs and protective shielding around the working area and wear goggles matched to the wavelength.
- Use purified or deionised water in the water cooling system and replace it regularly; if the water temperature or flow alarms, stop the machine, find the cause and then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lockout and tagging after power-off; the equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust during transport and storage; before long idle periods, drain the water circuit, disconnect power and cover the machine against dust.
- Route signal and encoder cables away from power cables and earth the shield at one end only; record the parameters after calibration for future reference.
- On receipt, check the model nameplate and the accessory list first; if problems arise during installation or commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
What is the difference between the FTC10S and the FTC10?
The FTC10S is pure analog without Z axis control and suits machines whose CNC system already closes the Z axis loop; the FTC10 has built-in Z axis control and communication and is more fully featured.
What is the micro-gap mode for?
A gap of around 0.2 mm suits high speed cutting of thin sheet, giving a narrower kerf and less dross.
Is calibration difficult?
Place a reference surface and calibrate with one key; in daily use, calibrate once again after changing the nozzle.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may be updated with batches, so please confirm with customer service before ordering. Reproduction of this page without written permission is prohibited.
Selection consulting: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.








Reviews
There are no reviews yet.