QQ: 859818709

Bessel Ultrafast Laser Cutting Head for Picosecond / Femtosecond Glass and Sapphire Dicing

Bessel Ultrafast Laser Cutting Head for Picosecond / Femtosecond Glass and Sapphire Dicing

Price on request
SKU: LAS-41708120-EN
Category:

Description

Bessel Ultrafast Laser Cutting Head for Picosecond / Femtosecond Lasers

The Bessel ultrafast cutting head is a high-precision optical cutting head designed for picosecond and femtosecond ultrafast lasers. It exploits the unique optical properties of the Bessel beam (also called a non-diffracting beam) to cut transparent and brittle materials such as glass, sapphire and ceramics precisely. The central spot of a Bessel beam can be as small as a few micrometres while its depth of focus reaches several millimetres or even more than ten millimetres, so the beam penetrates the full thickness of the material and performs stealth dicing – the material then separates along the scan path without any external force.

The cutting head supports PSO (position synchronized output) and Burst mode so that pulse energy is evenly distributed during processing. Combined with picosecond or femtosecond lasers it delivers high-quality cuts with minimal chipping, no taper and a high surface finish.

Key Features

  • Ultra-long depth of focus: over 10mm, covering the full material thickness, suitable for thick substrates
  • Micron-level focal spot: central spot down to 1-2 µm for extremely high cutting accuracy
  • Dedicated to ultrafast lasers: matched to picosecond and femtosecond lasers with high damage threshold optics
  • Low chipping / no taper: Bessel beam stealth dicing gives minimal chipping and vertical sidewalls without taper
  • PSO + Burst support: uniform and controllable pulse spacing for consistent processing quality
  • AR/AR anti-reflection coating: high transmittance over the 1030-1090nm band
  • Protective window design: replaceable protective window as standard, works without assist gas
Parameter Specification
Compatible laser Picosecond / femtosecond ultrafast laser (PSO and Burst mode required)
Operating wavelength 1030-1090 nm
Coating AR/AR @ 1030-1090 nm
Max. input beam diameter 12-20 mm
Depth of focus Over 10mm (depending on model)
Focal spot 1.4-2 µm (depending on model)
Minimum working distance 14 mm
Max. cutting thickness 1-6 mm (depending on model)
Protective window Standard
Mounting M6 screws, vertical fixing

Applications

  • Cover glass cutting: precision cutting of full-screen phone cover glass and 2.5D/3D glass
  • OLED panel cutting: flexible OLED substrate cutting and shaped panel cutting
  • Sapphire processing: taper-free sapphire cutting and watch crystal forming
  • Wafer dicing: stealth dicing of semiconductor wafers
  • LCD panel cutting: precision cutting of TFT-LCD panels
  • Smart wearable glass: precision processing of smartwatch cover glass
  • FPC/PCB cutting: precision cutting of flexible circuit boards

Selection Guide

Choose the model according to the material thickness to be cut: BSC-OL-1064-1.0MM for thin glass below 1mm, BSC-OL-1064-3.0MM for medium-thick glass of 1-3mm and BSC-OL-1064-6.0MM for thick glass of 3-6mm. Confirm that the laser supports a PSO module and Burst mode. During setup, use a dedicated alignment target for coaxial calibration to make sure the four beam segments are symmetric and even.

📞 Hotline: +86 159-2722-0467 | 🌐 Website: www.soar-laser.cn

Reviews

There are no reviews yet.

Be the first to review “Bessel Ultrafast Laser Cutting Head for Picosecond / Femtosecond Glass and Sapphire Dicing”

Your email address will not be published. Required fields are marked *

中文EN