QQ: 859818709

GF101 4kW 3D Robot Fiber Laser Cutting Head, Manual Focus, 3.5kg

GF101 4kW 3D Robot Fiber Laser Cutting Head, Manual Focus, 3.5kg

Price on request
SKU: LAS-74941167-EN
Category:

Description

Product Overview

The GF101 is a fiber laser cutting head built specifically for 3D robots by Empower, intended for low-to-medium power three-dimensional laser cutting, with a rated power of 4kW. The head uses manual focus adjustment: turning the focus ring sets the focal position precisely within a range of -9mm to +7mm (0.05mm resolution), covering the process requirements of different sheet thicknesses and materials.

The GF101 is designed for three-dimensional cutting on six-axis industrial robots. The complete head weighs only about 3.5kg, which greatly reduces the payload on the robot wrist and helps raise robot acceleration and dynamic accuracy. A built-in follow-up unit (capacitive height sensing) with 20mm of travel automatically keeps a constant distance between the nozzle and the workpiece during cutting, so cut quality stays stable. The optimized annular gas path delivers a smooth and efficient assist gas flow, and the slim modular nozzle design reduces interference with the workpiece, adapting to complex three-dimensional curved surfaces.

All optical lenses inside the GF101 use a drawer-type mounting structure, so routine replacement and maintenance never require removing the whole head, which greatly cuts maintenance time and cost. A protective lens above the collimating lens prevents dust and fume from settling directly on the collimator and destroying it. The overall sealed design keeps the head running stably in harsh industrial cutting environments. The GF101 can be combined with the Empower GF102 robot small-contour interpolation subsystem for high-precision small-radius arc cutting, and is widely used for laser cutting of automotive sheet metal, aerospace structural parts, kitchen and sanitary hardware and other three-dimensional profiled parts.

Key Features

🔷 3.5kg Ultra-Lightweight, Lower Robot Payload

The GF101 uses a lightweight integrated design and weighs only about 3.5kg, making it one of the lightest 4kW 3D cutting heads in its class. This brings three advantages: (1) lower payload on the robot wrist, so a smaller robot can be used (typically a payload of ≥35kg is sufficient), reducing equipment investment; (2) higher robot acceleration and travel speed, shortening the cutting cycle; (3) lower joint inertia, extending robot service life and maintenance intervals.

🔷 Manual Focus Adjustment, 0.05mm Resolution

The focal position is adjusted manually by turning the focus ring, over a range of -9mm to +7mm with 0.05mm resolution. Manual focusing is simple in structure and highly reliable, and suits batch production where the material thickness is fixed or the process parameters are stable. By selecting collimating lenses of different focal lengths (75mm/100mm) and focusing lenses (125mm/150mm), different depths of focus and focus offsets can be configured to cover everything from precision cutting of thin sheets to fast cutting of medium-thick plates.

🔷 Built-in Follow-Up Unit Keeps Nozzle Height Automatically

The GF101 has a built-in capacitive follow-up sensor and linear drive mechanism with 20mm of travel. During three-dimensional cutting the follow-up unit continuously measures the distance between nozzle and workpiece and drives the focusing module through the linear mechanism to keep a constant stand-off. This is especially important when cutting curved workpieces: robot path accuracy is typically ±0.1mm, while the shape deviation of the workpiece itself can reach several millimeters, and the follow-up function compensates this geometric deviation so cut quality stays consistent.

🔷 Drawer-Type Lens Mounting for Easy Maintenance

Every optical lens in the head (collimating lens, focusing lens, collimator protective lens, focus protective lens) uses a drawer-type mount: pull out the lens holder, swap the lens, push it back, with no need to disconnect any tubing or cabling. Compared with conventional screw-in holders, the drawer structure shortens lens replacement from 15 to 20 minutes down to 2 to 3 minutes, greatly reducing machine downtime and raising productivity.

🔷 Dual Protective Lenses Extend Core Lens Life

The GF101 has one protective lens above the collimating lens and one below the focusing lens (collimator protective lens Ø24.9mm × 1.5mm, focus protective lens Ø27.9mm × 4.1mm), forming double optical protection. The upper one stops dust and fume from migrating upward and contaminating the collimator; the lower one absorbs fume, spatter and back-reflected laser light during cutting. Both are consumables that can be replaced quickly, preventing contamination or damage to the expensive main lenses (collimator and focusing lens) and significantly lowering running cost.

🔷 Slim Nozzle Design Reduces Workpiece Interference

The modular slim nozzle gives the front of the cutting head a smaller diameter, so cutting can be performed inside complex three-dimensional workpieces with limited space, with less interference from the part or the fixture. Nozzles are interchangeable standard modules with apertures from 0.8mm to 3.0mm to suit different thicknesses and materials. Assist gas exits the nozzle through an optimized annular gas path, forming a smooth and uniform flow field that blows away dross effectively and ensures kerf quality.

Technical Specifications

Parameter Specification
Product Model GF101
Manufacturer Empower (Shanghai) Intelligent Technology / former Raytools AG technology
Power Rating 4kW
Compatible Laser Source Fiber laser (1060-1080nm)
Focus Adjustment Manual
Focus Range -9mm to +7mm
Focus Resolution 0.05mm
Follow-Up Travel 20mm
Fiber Interface QBH / QD
Clear Aperture 28mm
Collimating Lens Focal Length 75mm / 100mm
Focusing Lens Focal Length 125mm / 150mm
Collimator Protective Lens Ø24.9mm × 1.5mm
Focus Protective Lens Ø27.9mm × 4.1mm
Nozzle Type Single-layer nozzle
Nozzle Aperture 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.5 / 3.0mm
Assist Gas Pressure ≤25bar
Weight Approx. 3.5kg

GF101 vs GF101F

The GF101 (manual focus) and GF101F (motorized focus) are two versions of the same product family. The main differences are the focusing method and the follow-up function:

Item GF101 (manual focus) ★ GF101F (motorized focus)
Power Rating 4kW 4kW
Focus Adjustment Manual focus ring Motor-driven automatic focusing
Focus Range -9mm to +7mm -10mm to +10mm
Follow-Up Travel 20mm 20mm
Weight Approx. 3.5kg Approx. 5.4kg
Price Lower Higher (includes motor drive unit)
Typical Use Batch cutting of fixed plate thickness, stable process parameters Mixed plate thickness, fast piercing, automatic sheet change

💡 Selection advice: If the sheet thickness in your application is fixed (for example a dedicated machine cutting one thickness of sheet metal), the GF101 manual focus version fully meets the requirement, at a lower price and lower weight. If you cut plates of varying thickness (for example jumping from 1mm to 3mm and then to 5mm) and need to switch focal position frequently, the GF101F motorized version is recommended, since it changes focus from the program without stopping for manual adjustment.

Optical Configuration and Focus Calculation

By combining collimating and focusing lenses of different focal lengths, the GF101 provides different focus shift magnifications to suit different plate thicknesses:

Focus Shift Magnification

Focus shift magnification = focusing lens focal length / collimating lens focal length. When the focus ring moves 1mm, the focal point actually moves 1mm × focus shift magnification.

Collimating Lens Focal Length Focusing Lens Focal Length Focus Shift Magnification Focus Offset over Full Adjustment Range Typical Use
75mm 125mm 1.67× -15mm to +11.7mm Precision cutting of thin sheet (small spot)
75mm 150mm 2.0× -18mm to +14mm General cutting of thin and medium sheet
100mm 125mm 1.25× -11.3mm to +8.8mm Fine focus adjustment (small focus shift)
100mm 150mm 1.5× -13.5mm to +10.5mm Medium and thick plate cutting (long depth of focus)

⚠️ Focus position convention: the 0 position corresponds to the focal point exactly on the workpiece surface; a negative value means the focus is inside the material (positive defocus), suitable for thick plate cutting; a positive value means the focus is above the material (negative defocus), suitable for precision cutting of thin sheet. In practice the best focus position depends on the material, plate thickness and assist gas type (oxygen / nitrogen / air).

Applications

1. Three-Dimensional Cutting of Automotive Sheet Metal

Hole cutting, trimming and notching of body-in-white, door inner panels, hoods and fenders is a classic application of 3D robot laser cutting. Combined with a six-axis robot, the GF101 cuts any spatial curved contour flexibly and replaces conventional piercing and trimming dies, greatly shortening the development cycle of new models. Stainless steel or galvanized steel sheet from 1mm to 3mm thick is the range where the GF101 performs best.

2. Cutting of Hydroformed Parts

Hole cutting and trimming of hydroformed subframes, exhaust manifolds and other tubular parts on vehicle chassis involves complex shapes and varying spatial angles, and conventional processing is inefficient. The slim nozzle of the GF101 allows cutting inside tubular parts, and the follow-up function keeps the nozzle height constant when cutting along the curved tube wall, so quality is uniform.

3. Profiled Cutting of Kitchen and Sanitary Hardware

Stainless steel sinks, hob panels and range hood housings have complex 3D shapes and require mounting holes and drain holes cut on curved surfaces. With a robot, the GF101 locates and cuts precisely on any profiled surface, replacing manual drilling and punching and improving both accuracy and efficiency.

4. Cutting of Aerospace Structural Parts

Aluminum and titanium structural parts in aerospace require weight-reduction holes, mounting holes and contour trimming on 3D curved surfaces. The 4kW power class of the GF101 cuts 1mm to 4mm aluminum alloy sheet efficiently, and the follow-up function keeps the focal position accurate along complex curved surfaces. Nitrogen assist gas gives a bright kerf surface that meets aerospace quality requirements.

5. Cutting of Elevator Door Panels

Elevator door panels, escalator side panels and other large thin sheet parts need various functional holes and viewing windows cut into already formed parts. With a robot, the GF101 cuts holes and contours of any shape quickly in 1mm to 2mm stainless steel sheet, at cutting speeds of 5 to 15 m/min, far faster than conventional punching and milling.

Pairing with the GF102 Small-Contour Interpolation System

The GF101 can be combined with the Empower GF102 robot small-contour interpolation subsystem for even higher accuracy on small arcs and small contours:

GF102 key functions:

  • Adds a high-precision rotary axis (A axis) on the sixth axis of the robot, compensating the insufficient path accuracy of the robot when cutting small arcs
  • Compensates angular error at the robot wrist by rotating the A axis, enabling precision cutting of arcs with a radius of 1mm or even smaller
  • Preset shape library for quick recall of common cutting shapes (round holes, square holes, slotted holes, etc.)
  • Robot payload requirement ≥35kg

The GF102 plus GF101 combination is particularly suited to precision cutting of small round holes in automotive sheet metal parts (sensor mounting holes, harness pass-through holes and similar), where roundness and hole diameter accuracy are far better than a robot-only solution.

Installation and Use Guide

  1. Robot connection: the GF101 is attached to the flange of the sixth robot axis through a mounting plate, with mounting holes of 4ר4H7. Make sure the cutting head is electrically connected to the robot (good grounding) to prevent static charge from damaging the optics.
  2. Fiber connection: insert the QBH or QD fiber connector into the top port of the head, checking fiber end-face cleanliness before insertion. Lock the bayonet after insertion so the fiber end face sits tightly against the interface.
  3. Water cooling: connect the cooling water supply and return lines. Recommended flow ≥1.8L/min, inlet pressure 170-520kPa, water temperature at or above room temperature (to avoid condensation). Use purified or deionized water with hardness below 250mg/L (CaCO3 equivalent).
  4. Assist gas connection: connect an oxygen or nitrogen supply with purity of O₂ ≥99.95% and N₂ ≥99.99%. Install a 0.01μm precision filter in the line to remove particles and moisture.
  5. Focus setting: after installation, set the focal position by turning the focus ring. It is recommended to make a test cut on thin sheet to find the best focus position, then mark the scale position on the focus ring for quick repeatability.
  6. Follow-up calibration: before using the follow-up function, calibrate the capacitive sensor, setting the zero point and sensitivity parameters as described in the manual.

Routine Maintenance

Maintenance Item Interval Action
Focus protective lens check Every 4 hours Visually inspect for fume contamination or damaged spots, replace if necessary
Collimator protective lens check Weekly Pull out and inspect, wipe with a lint-free cloth dampened with ethanol, replace if heavily contaminated
Nozzle check Every shift Check the nozzle orifice for adhering dross or deformation, replace if necessary
Cooling water check Monthly Check cooling water flow and temperature, clean the water filter
Beam alignment check Quarterly Check spot concentricity with infrared sensitive paper, realign if deviation is excessive

Why Choose Soar Laser?

Soar Laser (SOAR-LASER) is an authorized distributor of Empower laser cutting heads, providing professional service from selection to after-sales support:

  • ✅ Genuine products: every cutting head is an original Empower unit and can be verified with the manufacturer
  • ✅ Professional selection: we recommend the best configuration for your laser power, robot model and processing requirement
  • ✅ Full accessory range: protective lenses, nozzles, collimating lenses, focusing lenses and the complete original accessory line
  • ✅ Installation and commissioning: on-site installation guidance, beam alignment and follow-up calibration support
  • ✅ Fast response: standard accessories ship within 24 hours, urgent requests handled the same day

📞 GF101 Cutting Head Technical Hotline

+86 159-2722-0467

Cutting head selection · Optical configuration · Installation and commissioning · Accessories

www.soar-laser.cn

Reviews

There are no reviews yet.

Be the first to review “GF101 4kW 3D Robot Fiber Laser Cutting Head, Manual Focus, 3.5kg”

Your email address will not be published. Required fields are marked *

中文EN