QQ: 859818709

SCANLAB intelliSCAN III 14 Smart Scan Galvo, 14 mm Aperture, 3 Switchable Tunings

SCANLAB intelliSCAN III 14 Smart Scan Galvo, 14 mm Aperture, 3 Switchable Tunings

Price on request
SKU: LAS-28128365-EN
Category:

Description

SCANLAB intelliSCAN III 14 Smart Scanning Galvo

The intelliSCAN III 14 is a 14 mm aperture smart scanning galvo system from SCANLAB (Germany) and belongs to the intelliSCAN III series. The series uses new-generation dynAXIS 3 galvo motors and digital servo control electronics, and sets the industrial standard for dynamic performance, long-term stability and linearity. Compared with the previous generation, the intelliSCAN III series is optimized for low drift: long-term drift is reduced by about 50% and thermal drift is significantly improved.

The intelliSCAN III 14 supports up to 3 switchable tunings (sharp edge, fast vector and others) that can be selected flexibly to suit different processes. It is equipped with iDRIVE intelligent diagnostics, which provides all key operating parameters of the scanner in real time and gives comprehensive data support for system integration and equipment maintenance.

Key Features

  • New-generation dynAXIS 3 galvo: optimized position detector design for the highest dynamic performance and excellent linearity
  • Multiple switchable tunings: up to 3 tunings to suit different process requirements
  • Low-drift design: long-term drift reduced by about 50% versus the previous generation, thermal drift significantly improved
  • iDRIVE intelligent diagnostics: comprehensive diagnostics with real-time access to the key operating states of the scanner
  • Digital servo control: lower heat generation, higher dynamic performance and better marking quality
  • Flexible cooling options: water or air cooling to suit different applications
  • 3D expansion: can be combined with varioSCAN II for 3D processing
  • Modular design: housing-free scan modules available for easy OEM integration
Parameter Specification
Aperture 14 mm
Angle sensor Analog position detector
Typical scan angle ±0.35 rad (optical)
Max. laser power 440 W @ 1064 nm (100% duty cycle)
Image field size 95 × 95 mm (1064nm, f=160mm)
Typical spot size 23 µm (1064nm, f=160mm, M²=1.0)
Number of tunings Up to 3
Default tuning Sharp Edge
Tracking error 0.15 ms
Marking speed 2.0 m/s (f=160mm)
Positioning speed 5.0 m/s (f=160mm)
Writing speed – high quality 480 cps
Writing speed – good quality 680 cps
Step response 1% 0.45 ms
Step response 10% 3.0 ms
Repeatability (RMS) <2 µrad
Positioning resolution 18 bit (2.8 µrad)
Non-linearity <0.9 mrad / 44°
Temperature drift – offset <15 µrad/K
Temperature drift – gain <25 ppm/K
8-hour drift – offset <100 µrad
8-hour drift – gain <100 ppm
24-hour drift – offset <100 µrad
Gain error <5 mrad
Zero offset <5 mrad
Control interface Digital SL2-100 / XY2-100 Enhanced
Power supply 30V DC, max 6A / 48V DC, max 6A
Operating temperature 25°C ± 10°C
Weight (without objective) Approx. 3 kg
Dimensions 175 × 118 × 147 mm³
Beam displacement 16.42 mm
Cooling Water or air cooling, optional

Applications

  • Laser micromachining: precision drilling, microstructure etching, thin film processing
  • Laser marking: high-speed marking of metals and non-metals, 2D code marking
  • Laser welding: precision spot welding, seam welding, high-speed scanning welding
  • Precision drilling: PCB microvias, nozzle holes and other high-accuracy drilling
  • Rapid prototyping / rapid tooling: SLA/SLS 3D printing scanning
  • Semiconductor processing: wafer dicing, chip marking
  • Marking on the fly: high-speed in-line marking on production lines

Selection Guide

The intelliSCAN III 14 targets mid-to-high-end applications and strikes a good balance between dynamic performance and accuracy. Compared with the excelliSCAN 14, its positioning accuracy and long-term drift figures are slightly lower, but it is more competitively priced and supports multiple switchable tunings. For applications that need the highest accuracy, such as micromachining and deep engraving, we recommend the excelliSCAN 14; for routine high-dynamics work such as marking and welding, the intelliSCAN III 14 is the cost-effective choice. Use it with the RTC series control cards and laserDESK software.

📞 Hotline: +86 159-2722-0467 | 🌐 Website: www.soar-laser.cn

Reviews

There are no reviews yet.

Be the first to review “SCANLAB intelliSCAN III 14 Smart Scan Galvo, 14 mm Aperture, 3 Switchable Tunings”

Your email address will not be published. Required fields are marked *

中文EN