Description
Product Overview
The intelliSCAN III 20 is a third-generation intelligent scan head from SCANLAB GmbH, Germany, a world-leading manufacturer of laser scanning systems. The product has a 20 mm clear aperture, a scan angle of ±0.35 rad, repeatability below 2 µrad (RMS), non-linearity below 0.9 mrad/44°, a marking speed of up to 2.0 m/s and a positioning speed of up to 11 m/s. It is widely used in laser marking, welding, cutting and other industrial processes.
Key Features
⚡ High-speed scanning performance
The marking speed reaches 2.0 m/s and the positioning speed 11 m/s, with a tracking error of only 0.32 ms. The optimized servo control algorithm guarantees a smooth transition between high-speed jumps and low-speed marking, and the response time for small steps is short, so marking quality stays high even during fast jump marking.
🎯 High-precision positioning
Repeatability (RMS) is below 2 µrad, non-linearity below 0.9 mrad/44°, gain drift below 15 ppm/K, zero drift below 15 µrad/K and 8-hour thermal drift below 100 µrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic temperature drift compensation maintain excellent positioning stability and process consistency during long continuous operation.
🌡️ Ultra-low thermal drift
Fine photoelectric sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome the temperature drift problem of scan heads. Zero-point thermal drift is only 15 µrad/K or less, gain thermal drift below 15 ppm/K and long-term 8-hour drift below 100 µrad, meeting the stability requirements of most long-duration, large-scale marking and welding applications. Process quality remains consistent even when the ambient temperature fluctuates by ±10 °C.
🔧 dynAXIS high-performance galvo motors
dynAXIS series high-performance galvo motors use high energy density permanent magnets in the rotor together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver outstanding dynamic response while maintaining scanning accuracy, and keep output stable over long continuous runs.
📡 High-precision analog and digital servo driver board
The SCANLAB high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit with first-tier international brand components, and every unit is aged for 360 hours before shipment, ensuring long-term reliable operation even in harsh electromagnetic environments.
🔌 Interface compatibility
The product supports the SL2-100 and XY2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 µrad) and XY2-100 provides 16-bit resolution (12 µrad), and it is compatible with the vast majority of laser control boards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), plug and play for convenient and efficient system integration. Power requirement is 30 V DC/6 A, and the interface cable is shielded to suppress external electromagnetic interference.
❄️ Efficient heat dissipation
Air cooling or water cooling can be selected. The water circuit covers the core heat zones such as the galvo block and the entrance aperture, effectively limiting lens temperature rise and preventing spot drift and focus shift caused by thermal lensing. Under high power and long continuous operation, the water cooling system keeps the scan head within its optimum temperature range and guarantees consistent process quality.
🛡️ High-reliability design
SCANLAB products strictly follow German manufacturing standards. Every unit undergoes comprehensive quality inspection and long-term ageing verification before shipment. Protection class is IP50/IP56 depending on the model, ensuring long-term reliable operation in industrial environments.
Technical Specifications
| Optical Parameters | |
|---|---|
| Clear aperture | 20 mm |
| Scan angle | ±0.35 rad |
| Maximum laser power | 2000 W |
| Mirror coating wavelength | Full range of coatings available |
| Scanning Parameters | |
|---|---|
| Non-linearity | 0.9 mrad/44° max |
| Tracking time | 0.32 ms |
| Repeatability (RMS) | 2 µrad max |
| Marking speed | 2.0 m/s max |
| Positioning speed | 11 m/s max |
| Gain drift | 15 ppm/K max |
| Zero drift | 15 µrad/K max |
| 8-hour drift (after 30 min warm-up) | 100 µrad max |
| Electrical Parameters | |
|---|---|
| Power supply | 30 V DC/6 A |
| Input signal protocol | SL2-100/XY2-100 |
| Cooling | Air or water cooled (optional) |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25 ± 10 °C |
| Dimensions (L×W×H) | 170x140x150 mm |
| Weight | 5 kg |
Operating Principle
A laser scan head is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors independently and steer the incoming laser beam to any position on the work plane, forming a two-dimensional scanning field. A galvo motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coil, the electromagnetic torque turns the rotor and mirror to the commanded angle, while a position sensor (an analog position detector, APD, or a digital encoder) measures the rotor angle in real time and compares it with the command to close the servo loop. Scanning speed depends on the dynamic response of the motor, and the tracking time, which characterizes how far the scan head lags the command signal, is the key indicator of high-speed performance.
Applications
Laser Marking
Suitable for marking characters, patterns, QR codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in electronic components, hardware tools, medical devices and other industries.
Laser Welding
Used for precision welding such as lap welding and spot welding of thin sheets, with a small heat-affected zone and little distortion, which suits the welding of precision parts.
Laser Cutting
Combined with a laser of appropriate power, it enables precision cutting of thin metal and non-metal materials with a narrow kerf, high speed and good edge quality.
3D Printing / Additive Manufacturing
Used for laser scanning in SLM/SLS metal additive manufacturing, precisely controlling the laser energy distribution and scan path to ensure the sintering quality of every layer.
Precision Micromachining
Suitable for precision microstructure processing in semiconductor, microelectronics and photonics applications, such as micro-drilling, micro-channel etching and thin film patterning.
Laser Cleaning
Combined with a high-power pulsed laser, it is used for selective cleaning of oxide layers, coatings and contamination on metal surfaces without damaging the substrate.
Research and Education
Suitable for laser processing experiments in universities and research institutes, and a common laboratory instrument in optical engineering, materials science and advanced manufacturing.
Selection Guide
When choosing a scan head, first determine the clear aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W and 20-30 mm above 500 W. Then select the grade according to the accuracy requirement: the economy 10C model covers 90% of routine marking needs, the high-precision 14AW-III-Pro suits precision marking and welding, and for high-end applications German-imported scan heads offer higher accuracy and stability, with the excelliSCAN series providing digital encoders and SCANahead control technology for the most demanding precision work. Scanning speed and dynamic performance depend on the application: marking is judged mainly by marking speed and writing speed, while welding is judged by welding speed and tracking error.
Model Comparison
| Model | Clear Aperture | Tracking Error | Marking Speed | Repeatability | Position Detection | Max Laser Power | Reference Price |
|---|---|---|---|---|---|---|---|
| intelliSCAN IV 10 | 10 mm | 0.11 ms | 3.5 m/s max | 2 µrad max | Analog APD | 150 W | On request |
| intelliSCAN se 14 | 14 mm | 0 ms | 4 m/s max | 0.4 µrad max | Digital encoder | 500 W | On request |
| intelliSCAN 14 | 14 mm | 0.32 ms | 1.0 m/s max | 2 µrad max | Analog APD | 500 W | On request |
| intelliSCAN 20 | 20 mm | 0.32 ms | 1.0 m/s max | 2 µrad max | Analog APD | 1000 W | On request |
| intelliSCAN 30 | 30 mm | 0.55 ms | 0.7 m/s max | 2 µrad max | Analog APD | 5000 W | On request |
| intelliSCAN III 10 | 10 mm | 0.11 ms | 3.5 m/s max | 2 µrad max | Analog APD | 150 W | On request |
| intelliSCAN III 20 | 20 mm | 0.32 ms | 2.0 m/s max | 2 µrad max | Analog APD | 2000 W | On request |
| intelliSCAN III 30 | 30 mm | 0.55 ms | 0.7 m/s max | 2 µrad max | Analog APD | 5000 W | On request |
About the Brand
SCANLAB GmbH, Germany, is a world-leading manufacturer of laser scanning systems, founded in 1990 and headquartered in Munich. The SCANLAB product line ranges from the entry-level basiCube to the flagship excelliSCAN, and is widely used in laser marking, welding, cutting, micromachining and additive manufacturing. With the innovative SCANahead control technology and dynAXIS series digitally encoded galvo motors, SCANLAB consistently leads the industry, and is renowned worldwide for outstanding accuracy, stability and dynamic performance.
Contact Us
To learn more about this product, request a quotation or ask for technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
We provide professional scan head selection advice and complete system integration solutions. Website: www.soar-laser.cn. You are welcome to call us.





Reviews
There are no reviews yet.