Description
Product Overview
One of the first choices for green-wavelength telecentric F-Theta scan lenses: the LINOS 4401-517-000-26, from the F-Theta-Ronar product line of Excelitas Technologies (Qioptiq, Germany). Design wavelength 532 nm, focal length 166.1 mm (nominal 167 mm), fused silica body, spot diameter of about 3.4 μm over an 86×86 mm scan field and transmission above 96%, giving stable and consistent focusing performance for laser marking, engraving and micromachining.
Key Features
- Telecentric optical design: chief rays strike the workpiece perpendicularly across the whole field, so hole sidewalls have no taper and edge and centre processing are identical, making the lens ideal for deep engraving, precision cutting and drilling.
- Optimized for the green band: design wavelength 532 nm, total transmission over the working band > 96%.
- High damage threshold coating: coating LIDT 20 J/cm², withstanding high power over long operating periods.
- Fused silica body: low thermal expansion and low absorption suppress thermal lensing; the low-absorption coating further reduces heating of the coating.
- Suited to ultrashort pulses: group delay dispersion (GDD) of only 4879 fs², so picosecond and femtosecond processing carries no risk of pulse broadening.
- Replaceable protective window as standard: protective window PG 4401-517-006-00 isolates dust and spatter, protects the internal lenses and keeps maintenance costs low.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 4401-517-000-26 |
| Type | LINOS F-Theta-Ronar telecentric F-Theta field lens (low absorption) |
| Brand | LINOS / Excelitas Technologies (Qioptiq, Germany) |
| Design Wavelength | 532 nm |
| Effective Focal Length EFL | 166.1 mm |
| Back Focal Length BFL | 218.2 mm |
| Working Distance WD | 215.5 mm |
| Flange Focal Length FFL | 313.4 mm |
| Max Input Beam Diameter (1/e²) | 14.0 mm |
| Recommended Galvo Spacing m1 | 17.0 mm |
| Recommended Galvo Spacing m2 | 33.0 mm |
| Recommended Galvo Spacing m2 (mechanical) | 27.8 mm |
| Scan Angle ±θ | 15.4 ° |
| Scan Field | 86×86 mm |
| Focused Spot Diameter | 3.4 μm |
| Max Telecentric Error | 3.4 ° |
| Total Transmission over Working Band | > 96% |
| Group Delay Dispersion GDD | 4879 fs² |
| Coating LIDT | 20 J/cm² |
| Back-Reflection Focus Positions (from first surface) | 3.3; 4.5; 6.1; 10.1; 14.7; 15.1; 40.0 mm |
| Weight | 2250 g |
| Protective Window Model | 4401-517-006-00 |
Applications
- Micromachining and research: with a GDD of 4879 fs², ultrafast micromachining pulses are not broadened and spot energy stays concentrated.
- Cutting and drilling: the telecentric design leaves deep hole sidewalls almost free of taper, and thick material is cut with vertical edges.
- Precision laser welding: an effective focal length of 166.1 mm (nominal 167 mm) gives moderate depth of focus; combined with a galvo scanner it welds battery housings and precision hardware with consistent seams.
- Laser marking and engraving: an 86×86 mm field with a spot of about 3.4 μm produces clean edges on metal, plastic and coatings, with high fidelity for small characters and 2D codes.
Installation and selection notes: the performance of a field lens depends on correct installation. First enter the recommended galvo spacings m1 = 17.0 mm and m2 = 33.0 mm into the scan head software, then set the distance from the lens reference plane to the workpiece according to the flange focal length FFL of 313.4 mm, and finally fine-tune the Z axis for the smallest spot before starting production. Keep the protective window PG 4401-517-006-00 in place and check it regularly for contamination, since a contaminated window directly degrades the spot energy distribution. For other field sizes, select a model of the same series with a different focal length in proportion (this model, f = 167 mm, covers an 86×86 mm field).
FAQ
What is the mounting interface of the 4401-517-000-26?
The flange focal length FFL of this model is 313.4 mm and the lens mounts to mainstream galvo scan heads through a mounting thread. The recommended galvo spacings are m1 = 17.0 mm and m2 = 33.0 mm; provide these two dimensions to the scan head manufacturer when selecting.
In which industries is the 4401-517-000-26 used?
Typical applications include green laser marking, laser engraving, precision laser welding and micromachining of wafers, glass and thin films; the telecentric design is especially suitable for deep-hole processing and processes that are sensitive to perpendicularity.
How does the 4401-517-000-26 perform with ultrashort pulses?
The group delay dispersion (GDD) is 4879 fs², so picosecond and femtosecond pulses pass through with almost no broadening; together with the low-absorption body, focal drift stays small during long high-power operation.
Contact Us
For more information, a quotation or technical advice on the LINOS 4401-517-000-26 telecentric F-Theta lens, please contact Soar Laser:
- Sales Hotline: +86 159-2722-0467
- Website: www.soar-laser.cn
We provide professional selection guidance, optical matching advice and after-sales support.








Reviews
There are no reviews yet.