Description
Product Overview
The small roller rotary fixture is designed for small-diameter, slender workpieces and uses a D80 chuck with a diameter of 80 mm. The fixture adopts a high-quality cast iron three-jaw chuck with moderate hardness, stable clamping, accurate positioning, smooth running and a low friction coefficient. It supports stepless elevation adjustment from 0 to 90 degrees with manual locking, so it adapts flexibly to the required processing angle of different workpieces. An industrial standard aviation connector makes it compatible with most fiber laser marking machine control boards, ready to use without modification. A stepper motor and driver are supplied as standard, with timing belt transmission for smooth, low-noise operation. It is an ideal rotary accessory for laser marking, welding and cutting of cylindrical surfaces.
Key Features
-
🔧 High-quality cast iron three-jaw chuck
A high-grade cast iron three-jaw self-centering chuck is used, with moderate hardness, uniform clamping force and high positioning accuracy. The three jaws move synchronously so the workpiece is centered automatically, with no need to adjust each jaw by hand, which greatly improves clamping efficiency. The chuck surface is finely machined for smooth running and a low friction coefficient, and resists wear over long-term use. -
📐 Stepless multi-angle adjustment
Stepless elevation adjustment from 0 to 90 degrees with stable manual locking. 0 degrees is horizontal, 90 degrees is vertical, and any intermediate angle can be locked. The flexible angle adjustment meets the processing needs of cups, tubes, ring-shaped workpieces and other shapes, so one fixture serves many jobs. -
🔌 Industrial standard aviation connector
The industrial standard aviation connector is directly compatible with the control boards of most fiber laser marking and engraving machines. Plug and play, with no extra modification or rewiring, which shortens system integration time and lowers cost. -
⚙ Stepper motor with timing belt drive
Equipped with a 42 x 40 mm stepper motor and a DM420 driver, the timing belt drive provides a 2.5:1 reduction for high torque and smooth rotation. Belt transmission is quiet and low in vibration, keeping marking accuracy consistent throughout rotation. The through hole (Ø16 mm) allows long shafts to pass through for processing. -
🔧 Easy installation
The mounting hole pattern is 80 x 50 mm (M5), so the fixture mounts directly on the machine worktable. The axis height is 85 mm and can be matched with a lifting table for precise focus adjustment. Roller support suits slender bars and tubes that cannot be held in a chuck.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | D80 rotary fixture |
| Chuck type | D80 mm three-jaw self-centering chuck |
| Clamping range A (external) | 2 – 22 mm |
| Clamping range B (internal) | 25 – 70 mm |
| Clamping range C (reverse jaws) | 22 – 63 mm |
| Elevation adjustment | 0 – 90 degrees |
| Motor | 42 x 40 mm stepper motor |
| Driver | DM420 driver |
| Transmission | Timing belt, 2.5:1 reduction |
| Through hole diameter | Ø16 mm |
| Axis height | 85 mm |
| Dimensions | 190 x 100 x 150 mm |
| Mounting holes | 80 x 50 mm (M5) |
| Weight | 4.6 kg |
| Connector | Industrial standard aviation connector |
Operating Principle
The rotary fixture drives the three-jaw chuck through a stepper motor and works in step with the galvo motion of the laser marking machine to achieve full 360 degree marking of cylindrical workpieces. During operation the galvo scans along the X axis while the rotary fixture advances in the rotation direction, and the two together cover the whole cylindrical surface. The chuck provides three clamping modes, external clamping (A), internal expansion (B) and reverse jaws (C), to suit workpieces of different shapes and sizes. The 2.5:1 reduction of the timing belt drive provides sufficient torque together with fine angular resolution, which safeguards marking quality. During installation, make sure the rotation axis is perpendicular to the laser beam and that the axis height matches the focal height.
Applications
- Laser marking on the cylindrical surface of stainless steel vacuum flasks
- Laser engraving of rings, bracelets and other jewelry
- Laser lettering on pen barrels and tubes
- Laser marking of bearing inner and outer rings
- Rotation support for laser welding of valves and flange fittings
Selection Guide
When choosing a rotary fixture, first confirm the maximum diameter of the workpiece; the chuck size should be larger than the workpiece diameter. The D69 suits small workpieces (rings, pen barrels and similar), the D80 suits medium workpieces (vacuum flasks, small tubes) and the D100/D125 suit large workpieces (large-diameter pipes, bearings and similar). The E version is the standard type, the F version is the reinforced type with higher torque, the C version is the compact type, and the low-profile version suits machines with limited Z-axis space. The roller type suits slender workpieces that cannot be held in a chuck. Confirm that the driver interface of the machine control board is compatible before ordering.
Model Comparison
| Model | Chuck diameter | Clamping range (external) | Elevation | Weight |
|---|---|---|---|---|
| D69E | Ø69 mm | 1 – 20 mm | 0 – 90 degrees | 3.2 kg |
| D80E | Ø80 mm | 2 – 22 mm | 0 – 90 degrees | 4.6 kg |
| D100E | Ø100 mm | 2 – 30 mm | 0 – 90 degrees | 7.0 kg |
| D125E | Ø125 mm | 2.5 – 40 mm | 0 – 90 degrees | 9.5 kg |
About the Brand
Changsha Soar Laser Equipment Co., Ltd. specializes in the development and manufacture of accessories for laser processing equipment, with a focus on laser rotary fixtures, optical tables and laser accessories. The company’s products are known for high precision, high stability and excellent cost performance, and are widely used to upgrade fiber laser marking machines, laser welding machines and similar equipment. They are trusted by laser equipment manufacturers and end users in China and abroad.
Contact Us
For more product information or a quotation, please contact our technical sales team:
📞 Hotline: +86 159-2722-0467
We provide professional technical selection support, volume purchase discounts and comprehensive after-sales service.









Reviews
There are no reviews yet.