QQ: 859818709

SCANLAB intelliSCAN se 14 Digital Encoder Galvo Scanner, 14 mm, 500 W

SCANLAB intelliSCAN se 14 Digital Encoder Galvo Scanner, 14 mm, 500 W

Price on request
Category:

Description

Product Overview

The SCANLAB intelliSCAN se 14 is a digital-encoder precision scan head from SCANLAB, the Germany-based leading manufacturer of laser scanning galvanometer systems. The scanner offers a 14 mm clear aperture and a scan angle of ±0.35 rad, with repeatability under 0.4 µrad (RMS), non-linearity under 0.5 mrad/44°, marking speed under 4 m/s and positioning speed under 30 m/s. Position sensing uses a digital encoder and the scanner supports SCANahead feed-forward control. It is widely used in laser marking, welding and cutting in industrial production.

Key Features

⚡ High-Speed Scanning Performance

Marking speed reaches 4 m/s and positioning speed 30 m/s, with a tracking error of only 0 ms. With SCANahead feed-forward control the scanner always runs at maximum acceleration and needs no reserve for deceleration, maintaining very high contour accuracy at high speed, eliminating the arc necking effect, and making it particularly suitable for high-speed vector marking and fill processing.

🎯 High-Precision Positioning

Repeatability (RMS) is under 0.4 µrad and non-linearity under 0.5 mrad/44°. High-resolution digital encoder position feedback and closed-loop control eliminate the drift and hysteresis errors inherent in open-loop systems, with gain drift under 8 ppm/K, zero-point drift under 15 µrad/K and 8-hour thermal drift under 20 µrad (after 30 minutes of warm-up). Precision optical sensors and advanced automatic thermal drift compensation keep positioning stability and process consistency excellent during long, uninterrupted operation.

🌡️ Ultra-Low Thermal Drift

Fine photoelectric sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome the thermal drift problem of galvanometer scanners. Zero-point thermal drift is only under 15 µrad/K, gain thermal drift under 8 ppm/K and 8-hour long-term drift under 20 µrad, which meets the stability requirements of the vast majority of long-duration, large-scale marking and welding applications. Consistent process quality is still guaranteed when the ambient temperature fluctuates by ±10 °C.

🔧 dynAXIS Digital Encoder Galvo Motors

The scanner uses SCANLAB’s latest dynAXIS se digital encoder galvo motors with a built-in 20-bit high-resolution encoder that provides 0.4 µrad positioning resolution. The encoder reads the rotor angle directly, eliminating the noise and drift inherent in analog position detectors and achieving true closed-loop servo control. Peak torque is high and response is fast, so sub-microradian positioning accuracy is maintained even at full load.

📡 Digital Servo Driver Board

An SCANLAB digital servo control board works with the 20-bit high-resolution encoder to achieve fully digital closed-loop servo control. The board supports SCANahead feed-forward control technology, greatly improving the dynamic performance and process accuracy of the scanner, and provides comprehensive diagnostic and protection functions.

🔌 Interface Compatibility

The product supports the SL2-100 and XY2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 µrad) and XY2-100 provides 16-bit resolution (12 µrad). It is compatible with the vast majority of laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), plug-and-play, for convenient and efficient system integration. Power requirement is 30 V DC / 3 A, and the interface cable uses a shielded design that effectively suppresses external electromagnetic interference.

❄️ Efficient Heat Dissipation

Air cooling is used, and the optimised heat-sink fin design combined with an efficient heat conduction path keeps the scanner running stably for long periods within its rated power range. The compact body balances heat dissipation performance and space utilisation, making it suitable for integration into all kinds of laser processing equipment.

🛡️ High-Reliability Design

SCANLAB products strictly follow German manufacturing standards, and every unit undergoes comprehensive quality inspection and extended burn-in verification before leaving the factory. The encoder version supports iDRIVE extended diagnostics for real-time monitoring of scanner status, temperature and position deviation, which facilitates predictive maintenance. Protection class IP50 / IP56 (depending on model) ensures long-term reliable operation in industrial environments.

Detailed Specifications

Optical Parameters
Clear Aperture 14 mm
Scan Angle ±0.35 rad
Maximum Laser Power 500 W
Mirror Coating Wavelength Full range of coatings available
Scanning Parameters
Non-linearity under 0.5 mrad/44°
Tracking Time 0 ms
Repeatability (RMS) under 0.4 µrad
Marking Speed under 4 m/s
Positioning Speed under 30 m/s
Gain Drift under 8 ppm/K
Zero-Point Drift under 15 µrad/K
8-Hour Thermal Drift (after 30 min warm-up) under 20 µrad
Electrical Parameters
Power Supply 30 V DC / 3 A
Input Signal Protocol SL2-100 / XY2-100
Cooling Method Air cooled
Mechanical Parameters
Operating Temperature 25 ±10 °C
Dimensions (L×W×H) 130x110x120 mm
Weight 5 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on the principle of electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirror respectively, steering the incoming laser beam to any position on the work plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coil, the electromagnetic torque drives the rotor and mirror to the commanded angle; a position sensor (analog position detector APD or digital encoder) continuously measures the rotor angle, which is compared with the commanded position to form a closed-loop servo control. Scanning speed depends on the dynamic response of the motor, and the tracking time (tracking error) describes how far the scanner lags behind the command signal, which is the key indicator of high-speed scanner performance.

Applications

Laser Marking

Suitable for marking text, patterns, 2D codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in the electronics, hardware and tools, and medical device industries.

Laser Welding

Can be used for precision welding such as lap welding of thin sheets and spot welding, with a small heat-affected zone and little distortion, making it suitable for welding precision components.

Laser Cutting

Combined with a laser of appropriate power, it enables precision cutting of thin metal and non-metal materials with a narrow kerf, high speed and good edge quality.

3D Printing / Additive Manufacturing

Used for laser scanning in SLM and SLS metal additive manufacturing, precisely controlling the laser energy distribution and scan path to ensure the sintering quality of every layer.

Precision Micromachining

Suitable for precision microstructure processing in semiconductors, microelectronics and photonics, such as micro-hole drilling, micro-channel etching and thin-film patterning.

Laser Cleaning

Combined with a high-power pulsed laser, it is used for selective cleaning of oxide layers, coatings and contamination on metal surfaces without damaging the substrate.

Research and Education

Suitable for laser processing experiments in universities and research institutes, and a common experimental tool in optical engineering, materials science and advanced manufacturing.

Selection Guide

When choosing a galvo scanner, first determine the clear aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W and 20-30 mm above 500 W. Then choose the scanner class according to the required process accuracy: the economical 10C covers 90 percent of routine marking needs; the high-precision 14AW-III-Pro suits precision marking and welding; for high-end applications, German-imported scanners provide higher accuracy and stability, and the excelliSCAN series with digital encoders and SCANahead control suits the most demanding precision processing. Scanning speed and dynamic performance depend on the application: marking speed and writing speed are the main indicators for marking, while welding speed and tracking error are the key parameters for welding.

Series Comparison

Model Clear Aperture Tracking Error Marking Speed Repeatability Position Sensing Max. Laser Power Reference Price (CNY)
intelliSCAN IV 10 10 mm 0.11 ms under 3.5 m/s under 2 µrad Analog APD 150 W On request
intelliSCAN se 14 14 mm 0 ms under 4 m/s under 0.4 µrad Digital encoder 500 W On request
intelliSCAN 14 14 mm 0.32 ms under 1.0 m/s under 2 µrad Analog APD 500 W On request
intelliSCAN 20 20 mm 0.32 ms under 1.0 m/s under 2 µrad Analog APD 1000 W On request
intelliSCAN 30 30 mm 0.55 ms under 0.7 m/s under 2 µrad Analog APD 5000 W On request
intelliSCAN III 10 10 mm 0.11 ms under 3.5 m/s under 2 µrad Analog APD 150 W On request
intelliSCAN III 20 20 mm 0.32 ms under 2.0 m/s under 2 µrad Analog APD 2000 W On request
intelliSCAN III 30 30 mm 0.55 ms under 0.7 m/s under 2 µrad Analog APD 5000 W On request

About the Brand

SCANLAB, based in Germany, is a leading manufacturer of laser scanning galvanometer systems, founded in 1990 and headquartered in Munich. Its product line covers the full range of scanners from the entry-level basiCube to the flagship excelliSCAN, widely used in laser marking, welding, cutting, micromachining and additive manufacturing. With the innovative SCANahead control technology and the dynAXIS series of digital encoder galvo motors, SCANLAB continues to lead the industry with outstanding accuracy, stability and dynamic performance.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “SCANLAB intelliSCAN se 14 Digital Encoder Galvo Scanner, 14 mm, 500 W”

Your email address will not be published. Required fields are marked *

中文EN