QQ: 859818709

SCANLAB hurrySCAN II 7 High-Speed Galvo Scanner, 7 mm Aperture

SCANLAB hurrySCAN II 7 High-Speed Galvo Scanner, 7 mm Aperture

Price on request
Category:

Description

Product Overview

The SCANLAB hurrySCAN II 7 is an ultra-high-speed laser scanning galvanometer with a 7 mm clear aperture, part of the laser scanning portfolio of SCANLAB, one of the world leading manufacturers of galvo scanning systems. It offers a scan angle of ±0.35 rad, RMS repeatability below 2 μrad, non-linearity below 3.5 mrad/44°, a marking speed below 5 m/s and a positioning speed below 20 m/s, and is widely used in laser marking, welding, cutting and other industrial applications.

Key Features

⚡ High-Speed Scanning Performance

Marking speed reaches 5 m/s and positioning speed 20 m/s, with a tracking error of only 0.08 ms. The optimised servo control algorithm guarantees smooth transitions between high-speed jumps and low-speed marking, and the short small-step response time keeps marking quality high even during high-speed jump marking.

🎯 High-Precision Positioning

RMS repeatability is below 2 μrad, non-linearity below 3.5 mrad/44°, gain drift below 25 ppm/K, zero drift below 15 μrad/K and 8-hour thermal drift below 0.6 mrad (after a 30-minute warm-up). Precision optical sensors combined with advanced automatic thermal drift compensation maintain excellent positioning stability and process consistency over long continuous runs.

🌡️ Ultra-Low Thermal Drift

Fine photoelectric sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome the thermal drift problem inherent to galvanometer scanners. Zero-point thermal drift is only below 15 μrad/K, gain thermal drift below 25 ppm/K and 8-hour long-term drift below 0.6 mrad, meeting the stability requirements of the vast majority of long-duration, high-volume marking and welding applications. Consistent processing quality is maintained even when the ambient temperature fluctuates by ±10 °C.

🔧 dynAXIS High-Performance Galvo Motors

The scanner uses dynAXIS series high-performance galvanometer motors: the rotor employs high-energy-density permanent magnets together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver excellent dynamic response while maintaining scanning accuracy, and hold stable output during long continuous operation.

📡 High-Precision Analog/Digital Servo Driver Board

A high-performance SCANLAB servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage interference-suppression protection array circuit with first-tier international brand components, and every unit is subjected to 360 hours of extended burn-in before shipment, ensuring long-term, reliable operation even in harsh electromagnetic environments.

🔌 Interface Compatibility

The scanner supports the SL2-100/XY2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad). It is compatible with the vast majority of laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), ready for plug-and-play and efficient system integration. Power supply requirement is 30 V DC/3 A, and the interface cable is shielded to effectively suppress external electromagnetic interference.

❄️ Efficient Heat Dissipation

The scanner is air cooled. Optimised cooling fins combined with an efficient heat conduction path keep it stable over long periods within the rated power range. The compact housing balances thermal performance against space efficiency, making it easy to integrate into all kinds of laser processing machines.

🛡️ High-Reliability Design

SCANLAB products strictly follow German manufacturing standards, and every unit undergoes comprehensive quality inspection plus long-term burn-in verification before shipment. Protection class is IP50/IP56 depending on model, ensuring long-term reliability in industrial environments.

Detailed Specifications

Optical Parameters
Clear aperture 7 mm
Scan angle ±0.35 rad
Max. power handling 50 W
Mirror coating wavelengths Full range of coatings available
Scanning Parameters
Non-linearity below 3.5 mrad/44°
Tracking time 0.08 ms
Repeatability (RMS) below 2 μrad
Marking speed below 5 m/s
Positioning speed below 20 m/s
Gain drift below 25 ppm/K
Zero drift below 15 μrad/K
8-hour thermal drift (after 30 min warm-up) below 0.6 mrad
Electrical Parameters
Power supply 30 V DC/3 A
Input signal protocol SL2-100/XY2-100
Cooling Air cooled
Mechanical Parameters
Operating temperature 25 ± 10 °C
Dimensions (L × W × H) 80 × 65 × 70 mm
Weight 0.65 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvanometer motors independently deflect the X-axis and Y-axis mirrors, steering the incoming laser beam to any point on the work plane and so forming a two-dimensional scan field. A galvanometer motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analog position detector, APD, or a digital encoder) measures the rotor angle in real time and compares it with the command to close the servo loop. Scanning speed depends on the dynamic response of the motor, and the tracking time (tracking error) describes how much the scanner lags the command signal, which is the key indicator of high-speed performance.

Applications

Laser Marking

Suitable for marking text, patterns, QR codes and serial numbers on metal and non-metal surfaces. Marking is accurate, fast and permanent, and is widely used in the electronics, hardware tool and medical device industries.

Laser Welding

Used for precision welding such as lap welding of thin sheets and spot welding. The heat-affected zone is small and distortion is minimal, which suits precision components.

Laser Cutting

Combined with a laser of suitable power, it delivers precision cutting of thin metal and non-metallic materials with a narrow kerf, high speed and good edge quality.

3D Printing / Additive Manufacturing

Used for laser scanning in SLM/SLS metal additive manufacturing, precisely controlling laser energy distribution and scan paths so that the sintering quality of every layer is assured.

Precision Micro-Machining

Suitable for precision micro-structure processing in semiconductor, microelectronics and photonics applications, such as micro-hole drilling, micro-channel etching and thin-film patterning.

Laser Cleaning

Combined with a high-power pulsed laser, it is used for selective cleaning of oxide layers, coatings and contamination on metal surfaces without damaging the substrate.

Research and Education

Suitable for laser processing experiments in universities and research institutes, and a common laboratory tool in optical engineering, materials science and advanced manufacturing.

Selection Guide

When choosing a scanning galvanometer, first determine the clear aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W and 20-30 mm above 500 W. Then choose the scanner grade according to the accuracy requirement: the economical 10C covers 90% of routine marking needs, while the high-precision 14AW-III-Pro suits precision marking and welding. For high-end applications, German-imported scanners offer higher accuracy and stability, and the excelliSCAN series with digital encoders and SCANahead control technology meets the most demanding precision processing requirements. Scan speed and dynamic performance depend on the application: marking is judged mainly by marking speed and writing speed, whereas welding is judged by welding speed and tracking error.

Series Comparison

Model Clear Aperture Tracking Error Marking Speed Writing Speed (good) Repeatability Max. Laser Power Reference Price
hurrySCAN II 7 7 mm 0.08 ms below 5 m/s N/A below 2 μrad 50 W On request
hurrySCAN 25 25 mm 0.50 ms below 0.8 m/s 260 cps below 2 μrad 1500 W On request

About the Brand

SCANLAB GmbH is a leading global manufacturer of laser scanning galvanometer systems, founded in 1990 and headquartered in Munich, Germany. Its product range covers the full spectrum from the entry-level basiCube to the flagship excelliSCAN, and is widely used in laser marking, welding, cutting, micro-machining and additive manufacturing. With innovative SCANahead control technology and dynAXIS series digitally encoded galvanometer motors, SCANLAB continues to lead the industry and is renowned worldwide for accuracy, stability and dynamic performance.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

🌐 Website: www.soar-laser.cn

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “SCANLAB hurrySCAN II 7 High-Speed Galvo Scanner, 7 mm Aperture”

Your email address will not be published. Required fields are marked *

中文EN