Description
Product Overview
The intelliWELD II PR is SCANLAB’s 3D scanning welding system for high-power laser welding: a 30 mm aperture combined with 8 kW power capability, an SL2-100 18-bit digital scan head with positioning accuracy better than 2 µrad, and a 0.6 ms Z-axis tracking response that follows seam height variations in real time within three-dimensional space. The Post-Objective (rear optics) design supports zoom and 3D processing, and the ±0.35 rad deflection range covers large welding fields. It is the flagship configuration for high-end welding lines such as body-in-white and power battery production.
Key Features
- High power capability: 30 mm aperture, 8 kW laser power input
- High-precision positioning: SL2-100 18-bit scan head, accuracy below 2 µrad
- Fast Z tracking: 0.6 ms tracking response, real-time following of seam height variation
- 3D zoom: ±0.35 rad deflection, flexible three-dimensional seam shaping
- High integration: scan head, control and cooling in one unit, interfacing with mainstream lasers
Technical Specifications
| Brand | SCANLAB (Germany) |
| Model | intelliWELD II PR |
| Aperture | 30 mm |
| Power capability | 8 kW |
| Deflection range | ±0.35 rad |
| Z tracking response | 0.6 ms |
| Positioning accuracy | below 2 µrad |
| Scan head | SL2-100 18-bit |
| Power supply | ±(15+1.5) V, max 8 A |
| Cooling | Water cooling + fan |
| Weight | 21-37 kg (depending on configuration) |
| Dimensions | 367 × 186.5 × 238 mm |
| Beam path design | Post-Objective (rear optics) |
Applications
Body-in-white laser welding, power battery module welding, high-power deep-penetration welding and three-dimensional seam processing. The same configuration also covers comparable processes; non-standard customisation and batch solutions can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- SCANLAB scan heads must be matched to the laser control interface (for example the SL2-100 protocol); confirm signal protocol and version compatibility before integration.
- For high-power applications, check the aperture and the load capacity of the mirror set: sustained operation beyond the rated specification accelerates ageing of the optics and degrades accuracy.
- Models in the same series differ in power, clear aperture, interfaces and functional modules. For batch purchasing or production-line integration, sample trials and solution evaluation can be requested.
- This is genuine original-equipment stock and ships with a packing list and warranty certificate. Warranty and spare-part support are provided from the date of receipt as agreed; consumable wear parts (mirrors, seals and similar) are excluded.
- This model is the SCANLAB intelliWELD II PR 3D scanning welding system with a 30 mm aperture; key specifications are listed in the specification table above. For higher power, a larger aperture or a different interface or focal-length version, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or specular reflections while the laser equipment is running. Fit warning signs and protective screening around the working area, and have personnel wear eye protection for the relevant wavelength band.
- Use purified or deionised water in the water cooling circuit and replace it regularly. If water temperature or flow alarms occur, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out applied after power-off. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust during transport and storage. Before long idle periods, drain the water circuit, disconnect power and cover the unit against dust.
- The scan head is a precision electromechanical assembly and must be transported in its original packaging. Add vibration-damping pads where on-site vibration is strong.
- On receipt, check the model nameplate and the accessories list first. If you need help with installation or commissioning, contact Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
What is the difference between the PR and FT versions?
The PR version is the high-precision post-objective configuration with a 0.6 ms tracking response; the FT version is the fast-switching configuration that supports stitch welding and zoom switching. Choose according to your process route.
Which lasers are supported?
The system interfaces with mainstream fiber and disk lasers such as IPG and TRUMPF through QBH/QCS connections; the exact configuration depends on the system setup.
How is seam tracking achieved?
Through high-speed Z-axis tracking combined with the process strategy; together with a follower sensor the focal position is held on three-dimensional curved surfaces.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are intended for selection reference only. Product specifications are subject to the actual unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with batch. Please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection support: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.





Reviews
There are no reviews yet.