Description
Product Overview
The SCANLAB fiberSYS is a 3D galvo scanner dedicated to multi-head systems, from SCANLAB GmbH, a leading global manufacturer of laser scanning systems. The scan head provides a 30 mm clear aperture and uses a post-objective 3D scanning design with an integrated Z-axis dynamic focusing module, so flat and curved surfaces can be processed accurately with linked XYZ motion. Maximum laser power is 2000 W, the scan angle is ±0.37 rad and repeatability is below 0.4 µrad. It suits precision laser processing of large-format and curved workpieces.
Key Features
⚡ High-Speed Scanning
Marking speed is below 4 m/s and positioning speed below 10 m/s, with a tracking error of only 0 ms. SCANahead feed-forward control keeps the scan head running at maximum acceleration without reserving any deceleration margin, maintaining very high contour accuracy during high-speed scanning and eliminating the necking effect on arcs, which makes it especially suitable for high-speed vector marking and filling.
🎯 High-Precision Positioning
Repeatability (RMS) is below 0.4 µrad and non-linearity is N/A. Position feedback comes from a high-resolution digital encoder, and closed-loop control eliminates the drift and hysteresis errors inherent in open-loop systems. Gain drift is below 5 ppm/K, zero-point drift below 10 µrad/K and 8-hour thermal drift below 20 µrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation maintain excellent positioning stability and process consistency during long continuous operation.
🌡️ Ultra-Low Thermal Drift
Fine photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the thermal drift problem of galvo scanners. Zero-point thermal drift is only below 10 µrad/K, gain thermal drift below 5 ppm/K and 8-hour long-term drift below 20 µrad, meeting the stability requirements of most long-duration, large-scale marking and welding applications. Process quality stays consistent even when the ambient temperature fluctuates by ±10 °C.
🔧 dynAXIS Digital-Encoder Galvo Motors
The scan head uses SCANLAB’s latest dynAXIS se digitally encoded galvo motors with a built-in 20-bit high-resolution encoder that provides 0.4 µrad positioning resolution. The encoder reads the rotor angle directly, eliminating the noise and drift inherent in analog position detectors and enabling true closed-loop servo control. The motors deliver high peak torque and fast response, and hold sub-microradian positioning accuracy even at full load.
📡 Digital Servo Driver Board
The SCANLAB digital servo control board works with the 20-bit high-resolution encoder to provide fully digital closed-loop servo control. The board supports SCANahead feed-forward control technology, greatly improving the dynamic performance and processing accuracy of the scan head, and also provides comprehensive diagnostic and protection functions.
🔌 Interface Compatibility
The scan head supports the SL2-100 standard communication protocol, which provides 20-bit digital resolution (0.76 µrad); the XY2-100 protocol provides 16-bit resolution (12 µrad). It is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series) for plug-and-play, efficient system integration. The power supply requirement is 48 V DC / 6 A, and the interface cables are shielded to suppress external electromagnetic interference.
❄️ Efficient Cooling System
The scan head is water cooled. The water circuit covers the galvo mount and the entrance aperture, effectively controlling mirror temperature rise and preventing beam drift and focus shift caused by thermal lensing. Under high-power, long-duration continuous operation the water cooling keeps the scan head within its optimum temperature range for consistent process quality.
🛡️ High-Reliability Design
SCANLAB products strictly follow German manufacturing standards, and every unit undergoes full quality inspection and long-term burn-in verification before shipment. Encoder versions support the iDRIVE extended diagnostic function, which monitors key parameters such as operating status, temperature and position deviation in real time for predictive maintenance. The protection class is IP50/IP56 depending on model, ensuring long-term reliable operation in industrial environments.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear aperture | 30 mm |
| Scan angle | ±0.37 rad |
| Max. laser power | 2000 W |
| Mirror coating wavelength | 1060~1085 nm |
| Scanning Parameters | |
|---|---|
| Non-linearity | N/A |
| Tracking time | 0 ms |
| Repeatability (RMS) | below 0.4 µrad |
| Marking speed | below 4 m/s |
| Positioning speed | below 10 m/s |
| Gain drift | below 5 ppm/K |
| Zero-point drift | below 10 µrad/K |
| 8-hour thermal drift (after 30 min warm-up) | below 20 µrad |
| Electrical Parameters | |
|---|---|
| Power supply | 48 V DC / 6 A |
| Input signal protocol | SL2-100 |
| Cooling method | Water cooling |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25 ± 10 °C |
| Dimensions (L × W × H) | 290 × 140 × 340 mm |
| Weight | 20 kg |
Operating Principle
A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, directing the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coils, the electromagnetic torque rotates the rotor and mirror to the commanded angle, while a position sensor (analog position detector APD or digital encoder) continuously measures the rotor angle and compares it with the command to close the servo loop. A 3D scan head adds a Z-axis dynamic focusing module to the 2D scan head; moving a variable-focus lens (meniscus lens) back and forth changes the focal length so the laser focus can be shifted along Z, giving precise focusing at any point in three-dimensional space. In a pre-objective (front-focus) 3D scan head the Z axis sits ahead of the XY mirrors, so the beam is focused first and then deflected, allowing a larger working field and processing of curved surfaces. In a post-objective (rear-focus) 3D scan head the Z axis sits behind the XY mirrors, so the beam is deflected first and then focused, giving a more compact design that suits small-field, high-precision 3D processing. Scanning speed depends on the dynamic response of the motors; the tracking time (tracking error) describes how far the scan head lags the command signal and is a key indicator of high-speed performance.
Applications
3D Curved Surface Processing
Suitable for laser marking and precision processing of three-dimensional curved workpieces such as automotive interior parts, 3D glass for mobile phones and curved appliance panels. Z-axis dynamic focusing keeps the spot uniform across the whole curved surface.
Large-Format Processing
Z-axis compensation enables an extra-large working field (up to 600 × 600 mm and above), breaking the field limit of a conventional 2D scan head plus f-theta lens and suiting full-surface processing of large workpieces.
Deep Engraving
Pre-objective 3D scan heads are particularly advantageous in deep engraving: the Z axis follows the engraving depth in real time and adjusts the focus position, so processing quality is consistent at every depth level.
Laser Cutting
Combined with Z-axis dynamic focusing, high-quality cutting is possible on materials of different thickness, with a uniform kerf and little dross, which suits precision cutting applications.
3D Printing
Used for laser scanning in metal additive manufacturing (SLM/SLS): the Z axis precisely controls powder layer thickness and focus position so that every layer is sintered consistently.
Laser Marking
Adds curved-surface and height-variation marking to flat marking, covering shaped and stepped parts and allowing several faces to be processed in a single clamping.
Precision Micromachining
3D scan heads configured for UV wavelengths suit high-precision microstructure work such as microfluidic chips, biosensors and photonic crystals.
Selection Guide
When choosing a 3D scan head, first define the process. A post-objective (rear-focus) 3D scan head is compact and suits small-field, high-precision 3D work such as deep engraving and fine 3D marking; a pre-objective (front-focus) 3D scan head provides a larger working field and curved-surface processing, suiting large-format and shaped workpieces. Aperture choice depends on laser power and working field: 14-20 mm for low-power UV processing, 20-30 mm for medium- and high-power fiber lasers, and 40 mm and above for high-power CO₂ processing. The coating must match the laser wavelength: 355 nm UV suits precision micromachining, 1064 nm fiber lasers are the most widely used, and 10600 nm suits CO₂ laser processing.
Series Comparison
| Model | Clear Aperture | Scan Angle | Max. Laser Power | Control | Cooling | Weight | Reference Price |
|---|---|---|---|---|---|---|---|
| fiberSYS | 30 mm | ±0.37 rad | 2000 W | SCANahead | Water cooling | 20 kg | On request |
About the Brand
SCANLAB GmbH, headquartered in Munich, Germany, is a leading global manufacturer of laser scanning (galvo) systems and was founded in 1990. Its portfolio ranges from the entry-level basiCube to the flagship excelliSCAN, and is widely used in laser marking, welding, cutting, micromachining and additive manufacturing. With the innovative SCANahead control technology and dynAXIS series digitally encoded galvo motors, SCANLAB keeps leading the industry with outstanding accuracy, stability and dynamic performance.
Contact Us
For more product information, a quotation or technical consultation, please contact us:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn | ✉️ Email: 859818709@qq.com
We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.





Reviews
There are no reviews yet.