Description
Product Overview
The RAYLASE MINISCAN III is a digitally controlled compact scanning galvanometer from RAYLASE, a well-known German manufacturer of laser scanning systems. With a clear aperture of 10-20 mm, a scan angle of ±0.393 rad, RMS repeatability below 2 μrad, non-linearity below 1.0 mrad, a marking speed below 2 m/s and a positioning speed below 100 rad/s, it is widely used in laser marking, welding, cutting and other industrial processes.
Key Features
⚡ High-Speed Scanning Performance
Marking speed reaches 2 m/s and positioning speed 100 rad/s, with a tracking error of only 0.20 ms. The optimised servo control algorithm guarantees smooth transitions between high-speed jumps and low-speed marking, and the short small-step response time keeps marking quality high even during high-speed jump marking.
🎯 High-Precision Positioning
RMS repeatability is below 2 μrad, non-linearity below 1.0 mrad, gain drift below 15 ppm/K, zero drift below 10 μrad/K and 8-hour thermal drift below 80 μrad (after a 30-minute warm-up). Precision optical sensors combined with advanced automatic thermal drift compensation maintain excellent positioning stability and process consistency over long continuous runs.
🌡️ Ultra-Low Thermal Drift
Fine photoelectric sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome the thermal drift problem inherent to galvanometer scanners. Zero-point thermal drift is only below 10 μrad/K, gain thermal drift below 15 ppm/K and 8-hour long-term drift below 80 μrad, meeting the stability requirements of most long-duration, high-volume marking and welding applications. Consistent process quality is maintained even when the ambient temperature fluctuates by ±10 °C.
🔧 dynAXIS High-Performance Galvo Motors
dynAXIS high-performance galvo motors use high-energy-density permanent magnets in the rotor together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors combine scanning accuracy with outstanding dynamic response and stable output over long continuous operation.
📡 High-Precision Analogue / Digital Servo Driver Board
The RAYLASE high-performance servo driver board provides a high-speed PWM output stage and precision position detection. It uses a multi-stage interference-suppression protection array circuit with first-tier international components, and every board is aged for 360 hours before shipment, ensuring long-term reliable operation even in harsh electromagnetic environments.
🔌 Interface Compatibility
The scanner supports the SL2-100 and XY2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad). It is compatible with the vast majority of laser control cards on the market (such as the JCZ EZCAD series, the SCANLAB RTC series and the RAYLASE SP-ICE series), so integration is plug-and-play and efficient. Power requirement is 24 V DC / 3 A, and the interface cables are shielded to suppress external electromagnetic interference.
❄️ Efficient Cooling
This product is air cooled. Optimised heat-sink fins combined with an efficient heat conduction path keep the scanner stable over long runs within its rated power range. The compact housing balances thermal performance against space efficiency, making it easy to integrate into a wide range of laser processing machines.
🛡️ High-Reliability Design
RAYLASE products use a dust-sealed housing rated IP64, with high-quality internal components and precision machining that ensure long-term stable operation in harsh industrial environments.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear aperture | 10-20 mm |
| Scan angle | ±0.393 rad |
| Max. laser power handling | 500 W |
| Mirror coating wavelength | Full range of coatings available |
| Scanning Parameters | |
|---|---|
| Non-linearity | below 1.0 mrad |
| Tracking time | 0.20 ms |
| RMS repeatability | below 2 μrad |
| Marking speed | below 2 m/s |
| Positioning speed | below 100 rad/s |
| Gain drift | below 15 ppm/K |
| Zero drift | below 10 μrad/K |
| 8-hour thermal drift (after 30 min warm-up) | below 80 μrad |
| Electrical Parameters | |
|---|---|
| Power supply | 24 V DC / 3 A |
| Input signal protocol | SL2-100 / XY2-100 |
| Cooling method | Air cooled |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25 ± 10 °C |
| Dimensions (L×W×H) | 134 × 98 × 90 mm |
| Weight | 2.5 kg |
Operating Principle
A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, steering the incoming laser beam to any point on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coils, the electromagnetic torque rotates the rotor and mirror to the commanded angle, while a position sensor (an analogue position detector, APD, or a digital encoder) measures the rotor angle in real time and closes the servo loop against the command. Scan speed depends on the dynamic response of the motor, and the tracking error expresses how far the scanner lags the command signal – a key indicator of high-speed performance.
Applications
Laser Marking
Suitable for text, graphics, 2D codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in electronic components, hardware tools, medical devices and similar industries.
Laser Welding
Used for lap welding of thin sheets, spot welding and other precision welding tasks. The heat-affected zone is small and distortion is low, making it suitable for precision components.
Laser Cutting
Combined with a laser of appropriate power, it delivers precision cutting of thin metal and non-metal materials with a narrow kerf, high speed and good edge quality.
3D Printing / Additive Manufacturing
Used for beam scanning in SLM and SLS metal additive manufacturing, precisely controlling energy distribution and scan paths to ensure the quality of every sintered layer.
Precision Micro-Machining
Suitable for micro-structure processing in semiconductor, microelectronics and photonics work, such as micro-drilling, micro-channel etching and thin-film patterning.
Laser Cleaning
Combined with a high-power pulsed laser, it selectively removes oxide layers, coatings and contamination from metal surfaces without damaging the substrate.
Research and Education
Suitable for laser processing experiments in universities and research institutes, and a common laboratory instrument in optical engineering, materials science and advanced manufacturing.
Selection Guide
When choosing a galvo scanner, first size the clear aperture to the laser power: below 100 W choose 8-10 mm, from 100 W to 500 W choose 10-14 mm, and above 500 W choose 20-30 mm. Then match the scanner class to the accuracy requirement: an economy 10C unit covers 90% of routine marking needs, a high-precision 14AW-III-Pro suits precision marking and welding, and for high-end work German-made scanners offer higher accuracy and stability, with the excelliSCAN series adding digital encoders and SCANahead control for the most demanding precision processing. Scan speed and dynamic performance depend on the application: marking is judged on marking speed and writing speed, while welding is judged on welding speed and tracking error.
Series Comparison
| Model | Available Aperture | Optical Deflection | Repeatability | Max. Laser Power | Control | IP Rating | Reference Price |
|---|---|---|---|---|---|---|---|
| MINISCAN III | 10/14/20 mm | ±0.393 rad | below 2 μrad | 500 W | Digital control | IP64 | On request |
| SUPERSCAN IIE | 7-30 mm | ±0.393 rad | below 2 μrad | 3000 W | Digital control | IP64 | On request |
| SUPERSCAN IV | 10/15/20/30 mm | ±0.393 rad | below 2 μrad | 6000 W | Digital control | IP64 | On request |
| SUPERSCAN IVHL-15 | 15 mm | ±0.393 rad | below 2 μrad | 500 W | Digital control | IP64 | On request |
About the Brand
RAYLASE is a well-known German manufacturer of laser scanning systems, dedicated to high-performance deflection units for industrial laser applications. The RAYLASE portfolio includes the compact MINISCAN III series, the high-precision SUPERSCAN IIE series and the high-speed SUPERSCAN IV series, covering apertures from 10 mm to 30 mm and laser power up to 6 kW. RAYLASE scanners are known for digital control, modular design and excellent thermal management, and are widely used in laser marking, welding, additive manufacturing and solar cell processing.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn
We provide professional galvo scanner selection advice and complete system integration support. Call us any time.





Reviews
There are no reviews yet.