Description
Product Overview
The XC3000Pro dual-head version is a RayTools single-gantry two-head laser cutting system on the xStudio platform: both cutting heads have independent follow-up control and run without interfering with each other. It also supports two coils cut in segments with both heads working at once, which doubles throughput on a small footprint. EtherCAT bus and pulse-plus-direction servo drives are both supported, and mainstream IPG, SPI and Raycus sources can be connected. It is the core controller for mid-to-low power two-head cutting lines.
Key Features
- Dual-head dual follow-up: two heads on one gantry, running independently
- Coil segment dual-head: small footprint, doubled throughput
- Dual drive modes: EtherCAT bus and pulse servo both supported
- Laser source compatibility: IPG, SPI, Raycus and other mainstream brands
- Simple commissioning: a full function set that is quick to learn
Technical Specifications
| Brand | Empower / RayTools |
| Model | XC3000Pro (dual head) |
| Type | Flat-sheet single-gantry dual-head laser cutting CNC system |
| Bus | EtherCAT / pulse + direction |
| Processing | Dual-head dual follow-up, coil segment dual-head |
| Power class | Mid-to-low power |
| Platform | xStudio |
Applications
Two-head flat-sheet cutting lines, online coil cutting, and volume processing of thin sheet. The same system also covers comparable duties, with non-standard customisation and batch projects available on request; drawings or process requirements can be supplied for a detailed assessment.
Selection Guide
- When specifying the control system, settle the servo architecture (EtherCAT bus or pulse) and the laser source brand first, then choose the matching system version, so the interfaces do not clash.
- The bus version keeps wiring simple, refreshes fast and expands well; when retrofitting older equipment, confirm the existing electrical interface first and choose a pulse version or a mixed-support model where necessary.
- Models in the two-head line differ in head count, gantry length, follow-up range, interface and function modules; sample trials and solution assessments can be requested for batch purchases or production line projects.
- The product is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing parts and damage caused by incorrect operation.
- This model is the XC3000Pro (dual head), and its key specifications are listed in the table above. For a higher power class, more axes, or a different interface or function set, contact us for a series comparison and quotation. Contact us for a series comparison and quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running; mark the work area with warning signs and shielding, and wear protective goggles matched to the wavelength.
- Where the machine uses water cooling for the laser source or the optics, fill with purified or deionised water and change it on schedule; stop and investigate before restarting if a temperature or flow alarm appears.
- Electrical wiring and servicing must be carried out by a licensed electrician with lockout and tagout applied; the equipment must be reliably earthed to prevent leakage and interference.
- Protect the cabinet from moisture and dust during transport and storage; before long shutdowns, disconnect power and cover the cabinet against dust.
- Configure cabinet ventilation for the controller and the drives as the installation standard requires, fit duct filters in dusty plants, and back up system parameters regularly.
- On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Can the two heads cut different shapes at the same time?
The heads have independent follow-up control and can execute separate jobs in parallel, which multiplies output.
Is it better value than two single-head machines?
Both heads share the gantry and the machine bed, so investment per unit of output is lower; it suits volume thin-sheet and coil work.
How do two coils run?
The two coils are fed in segments and cut by both heads, cutting while feeding, and the system splices the segments automatically.
Disclaimer
The parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.








Reviews
There are no reviews yet.