QQ: 859818709

RayTools XW100 Flat-Sheet Laser Welding Control System

RayTools XW100 Flat-Sheet Laser Welding Control System

Price on request
Category:

Description

Product Overview

The XW100 is the flat-sheet laser welding control system in the RayTools range, built on the xStudio platform. EtherCAT is supported in both SM and DC mode with a 1 ms control cycle, and an S-curve acceleration and deceleration model keeps motion smooth so the machine sees less shock. IO provision is generous at 24DI / 16DO / 4AD / 4DA / 4PWM, there is one laser follow-up interface, and 4/5-axis interpolation with PSO teaching is available. Continuous-wave, quasi-continuous-wave and semiconductor fiber sources are all handled, including a dual-source combined process, with power and speed matched during the weld and power ramped at the start and end of the seam. Typical work is sheet-metal welding, cabinet welding and the new-energy sector.

Key Features

  • EtherCAT SM/DC: flexible bus mode
  • 1 ms control cycle: good real-time response
  • S-curve ramping: smooth motion, low shock
  • Generous IO: 24DI / 16DO / 4AD / 4DA / 4PWM
  • 4/5-axis interpolation with PSO: complex paths and synchronised output

Technical Specifications

Brand Empower / RayTools
Model XW100
Type Flat-sheet laser welding control system
Bus EtherCAT (SM and DC mode)
Control mode Pulse / bus (4 general axes + 1 F-axis focus)
Control cycle 1 ms
Acceleration S-curve
IO 24DI / 16DO / 4AD / 4DA / 4PWM
Laser follow-up 1 channel
Power supply EPC-2000 12 V / EDS-2000 24 V
Operating temperature 0 to +80 °C
Platform xStudio

Applications

Sheet-metal welding, cabinet welding, new-energy welding, cladding and hardening. Other duties with a similar weld geometry are handled by the same controller; non-standard builds and batch projects can be reviewed from your drawings or process requirements.

Selection Guide

  • Start from the weld geometry, the sheet format and the throughput you need, and we will match axis count and IO budget to the application; a seam sample or drawing shortens the assessment.
  • Continuous-wave, quasi-continuous-wave and semiconductor sources are all supported, and a dual-source combined process is possible, so state the source type and combination up front.
  • The controller is genuine factory stock with packing list and warranty certificate; warranty and spare parts run from receipt as agreed, excluding consumable wear parts.
  • This model is the XW100, with key figures in the table above; for another axis configuration, IO count or interface, contact us for a comparison and quotation.

Usage Precautions

  • Do not stare into the beam or its specular reflections during welding; screen the cell, post warning signs and wear goggles matched to the wavelength.
  • The cooling circuit takes purified or deionised water, renewed on schedule; treat a temperature or flow alarm as a stop condition and clear the cause first.
  • Wiring and maintenance belong to a licensed electrician working under lockout and tagout, with the machine properly earthed against leakage and interference.
  • Keep the cabinet dry and dust-free during transport and storage, and drain the water circuit before a long shutdown.
  • Carry out the daily inspection and maintenance routine given in the manual; stop and investigate any abnormality rather than running on with a fault and enlarging the damage.
  • Compare nameplate and accessory list on arrival; Changsha Soar Laser support is available on +86 159-2722-0467 for remote or on-site help with commissioning.

FAQ

Are dual laser sources supported?
Yes. Continuous-wave, quasi-continuous-wave and semiconductor fiber sources are supported, including a dual-source combined welding process.

Which file formats are accepted?
G-code, DXF and PLT job files, and a built-in CAD engine is provided for drawing and editing geometry.

How is seam following set up?
One laser follow-up interface is provided; connect a follow-up unit and the seam is tracked without extra hardware in the controller.

Disclaimer

The values on this page are compiled from the manufacturer’s published data and existing documentation as a selection reference. The delivered unit, its factory inspection report and the manufacturer’s latest specification sheet take precedence; appearance and configuration may change with production batches, so please confirm before ordering. Reproduction of this content without written permission is not allowed.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools XW100 Flat-Sheet Laser Welding Control System”

Your email address will not be published. Required fields are marked *

中文EN