Description
Product Overview
The XW100 is the flat-sheet laser welding control system in the RayTools range, built on the xStudio platform. EtherCAT is supported in both SM and DC mode with a 1 ms control cycle, and an S-curve acceleration and deceleration model keeps motion smooth so the machine sees less shock. IO provision is generous at 24DI / 16DO / 4AD / 4DA / 4PWM, there is one laser follow-up interface, and 4/5-axis interpolation with PSO teaching is available. Continuous-wave, quasi-continuous-wave and semiconductor fiber sources are all handled, including a dual-source combined process, with power and speed matched during the weld and power ramped at the start and end of the seam. Typical work is sheet-metal welding, cabinet welding and the new-energy sector.
Key Features
- EtherCAT SM/DC: flexible bus mode
- 1 ms control cycle: good real-time response
- S-curve ramping: smooth motion, low shock
- Generous IO: 24DI / 16DO / 4AD / 4DA / 4PWM
- 4/5-axis interpolation with PSO: complex paths and synchronised output
Technical Specifications
| Brand | Empower / RayTools |
| Model | XW100 |
| Type | Flat-sheet laser welding control system |
| Bus | EtherCAT (SM and DC mode) |
| Control mode | Pulse / bus (4 general axes + 1 F-axis focus) |
| Control cycle | 1 ms |
| Acceleration | S-curve |
| IO | 24DI / 16DO / 4AD / 4DA / 4PWM |
| Laser follow-up | 1 channel |
| Power supply | EPC-2000 12 V / EDS-2000 24 V |
| Operating temperature | 0 to +80 °C |
| Platform | xStudio |
Applications
Sheet-metal welding, cabinet welding, new-energy welding, cladding and hardening. Other duties with a similar weld geometry are handled by the same controller; non-standard builds and batch projects can be reviewed from your drawings or process requirements.
Selection Guide
- Start from the weld geometry, the sheet format and the throughput you need, and we will match axis count and IO budget to the application; a seam sample or drawing shortens the assessment.
- Continuous-wave, quasi-continuous-wave and semiconductor sources are all supported, and a dual-source combined process is possible, so state the source type and combination up front.
- The controller is genuine factory stock with packing list and warranty certificate; warranty and spare parts run from receipt as agreed, excluding consumable wear parts.
- This model is the XW100, with key figures in the table above; for another axis configuration, IO count or interface, contact us for a comparison and quotation.
Usage Precautions
- Do not stare into the beam or its specular reflections during welding; screen the cell, post warning signs and wear goggles matched to the wavelength.
- The cooling circuit takes purified or deionised water, renewed on schedule; treat a temperature or flow alarm as a stop condition and clear the cause first.
- Wiring and maintenance belong to a licensed electrician working under lockout and tagout, with the machine properly earthed against leakage and interference.
- Keep the cabinet dry and dust-free during transport and storage, and drain the water circuit before a long shutdown.
- Carry out the daily inspection and maintenance routine given in the manual; stop and investigate any abnormality rather than running on with a fault and enlarging the damage.
- Compare nameplate and accessory list on arrival; Changsha Soar Laser support is available on +86 159-2722-0467 for remote or on-site help with commissioning.
FAQ
Are dual laser sources supported?
Yes. Continuous-wave, quasi-continuous-wave and semiconductor fiber sources are supported, including a dual-source combined welding process.
Which file formats are accepted?
G-code, DXF and PLT job files, and a built-in CAD engine is provided for drawing and editing geometry.
How is seam following set up?
One laser follow-up interface is provided; connect a follow-up unit and the seam is tracked without extra hardware in the controller.
Disclaimer
The values on this page are compiled from the manufacturer’s published data and existing documentation as a selection reference. The delivered unit, its factory inspection report and the manufacturer’s latest specification sheet take precedence; appearance and configuration may change with production batches, so please confirm before ordering. Reproduction of this content without written permission is not allowed.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.









Reviews
There are no reviews yet.