QQ: 859818709

RayTools BS04K CAT-3D 4 kW CAT-Series Smart Cutting Head, 3D Tube, ±32 mm Focus

RayTools BS04K CAT-3D 4 kW CAT-Series Smart Cutting Head, 3D Tube, ±32 mm Focus

Price on request
Category:

Description

Product Overview

The BS04K CAT-3D is the 3D tube-cutting version of the new-generation CAT series all-in-one smart laser cutting head, supplied in international edition and rated 4 kW. It takes the 4 kW BS04K platform and adds three-dimensional tube capability, so the head follows the tube contour and cuts end faces and angled features instead of only flat sheet. The CAT sensor set is retained in full: protective lens temperature, stray light, gas pressure, dew point and cavity pressure are monitored, with piercing detection, cut-through detection and automatic re-cut, shared-edge detection and TRA anti-collision protection. Focus runs over EtherCAT, Profinet, 0-10 V or pulse, and paired with the XC4000T or XC3000T control system the head works in full closed loop over EtherCAT, which is the configuration used on dedicated tube laser machines.

Key Features

  • 3D tube cutting: designed for three-dimensional tube cutting, including end-face and angled cuts
  • All-in-one design: compact single-body construction with a high level of integration
  • Full smart sensing: protective lens temperature, stray light, gas pressure, dew point and cavity pressure monitored
  • Multi-protocol focusing: focus control over EtherCAT, Profinet, 0-10 V or pulse
  • Smart piercing and process monitoring: shortens the piercing wait and re-cuts automatically when cut-through is not detected
  • Anti-collision protection: TRA nozzle-assembly protection stops the machine on impact
  • Full closed-loop control: EtherCAT closed loop with the XC4000T or XC3000T control system

Technical Specifications

Parameter Specification
Power rating 4 kW
Wavelength 1080 nm
Fiber interface QBH, QD, G5
Clear aperture 28 mm
Focus range -32 to +32 mm (F200 mm)
Focus speed up to 200 mm/s
Focus resolution 0.01 mm
Numerical aperture 0.14
Assist gas pressure up to 30 bar
Weight approx. 7.5 kg
Brand Empower / RayTools

Series Comparison

Model Power Focus range (F200) Weight Application
BS04K CAT-3D 4 kW ±32 mm approx. 7.5 kg 3D tube cutting
BS08K CAT-3D 8 kW ±32 mm approx. 8.2 kg 3D tube cutting
BS15K CAT-3D 15 kW ±72 mm approx. 8.2 kg 3D tube cutting

The CAT-3D family covers 4 kW, 8 kW and 15 kW with the same 3D tube capability; the 15 kW model has the widest focus travel at ±72 mm. The CAT-2D versions of the same power classes are flat-sheet heads and cannot follow a tube contour, while the BD04K and BM111-3D are the non-CAT tube alternatives.

Applications

Tube processing and profile cutting on dedicated tube laser machines: three-dimensional cutting of round, square and rectangular tube where the head follows the tube contour and cuts end faces and angled features.

Selection, spare parts and lead-time enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn.

Disclaimer

Specifications are taken from the manufacturer datasheet current at the time of publication and are subject to change without notice. Actual cutting performance depends on the laser source, the process gas, the material grade and the machine kinematics. Confirm the configuration and interface of the head against your machine before ordering. This is the 3D tube-cutting model of the CAT series. For flat-sheet cutting of the same 4 kW platform, refer to the BS04K CAT-2D.

Reviews

There are no reviews yet.

Be the first to review “RayTools BS04K CAT-3D 4 kW CAT-Series Smart Cutting Head, 3D Tube, ±32 mm Focus”

Your email address will not be published. Required fields are marked *

中文EN