QQ: 859818709

RayTools BS15K CAT-3D 15 kW 3D Smart Laser Cutting Head, International Edition

RayTools BS15K CAT-3D 15 kW 3D Smart Laser Cutting Head, International Edition

Price on request
Category:

Description

Product Overview

The BS15K CAT-3D is the high-power 3D tube-cutting version of the new-generation CAT series all-in-one smart laser cutting head, supplied in international edition and rated 15 kW, the highest power class in the CAT-3D range. Beyond the full CAT-series smart sensing package it adds a water-cooled nozzle structure, which is what keeps a 15 kW process stable over long uninterrupted runs, and it communicates with the CNC over EtherCAT or Profinet for closed-loop control. The head is built for thick-wall tube and heavy section work where a 4 kW or 8 kW head runs out of headroom before the source does.

Key Features

  • 15 kW power class: the top of the CAT-3D range, intended for high power tube cutting rather than thin-wall work
  • Water-cooled nozzle: the nozzle carries a water circuit in addition to gas cooling, so the assembly holds stability during long high-power runs
  • All-in-one smart design: single-body construction with the optical path, focus drive and sensing electronics integrated
  • Multi-protocol focusing: focus control over EtherCAT, Profinet, 0-10 V analog or pulse
  • Smart piercing and process monitoring: piercing detection and process monitoring are built in
  • Four protective lenses: four layers in the optical path slow contamination and extend the life of the core optics
  • TRA anti-collision protection: the nozzle assembly is protected against impact

Technical Specifications

Parameter Specification
Power rating 15 kW
Wavelength 1080 nm
Fiber interface QBH, QD, G5
Focus range -32 to +32 mm (F200 mm); -72 to +72 mm (F300 mm)
Focus speed up to 200 mm/s
Focus resolution 0.01 mm
Numerical aperture 0.14
Assist gas pressure up to 30 bar
Nozzle cooling water and gas cooled
Weight approx. 8.2 kg
Brand Empower / RayTools

Series Comparison

Model Power Focus range (F200) Cooling Weight
BS04K CAT-3D 4 kW ±32 mm gas cooled approx. 7.5 kg
BS08K CAT-3D 8 kW ±32 mm gas cooled approx. 8.2 kg
BS15K CAT-3D 15 kW ±72 mm water and gas cooled approx. 8.2 kg

The three CAT-3D models keep the same 3D tube capability and the same body mass of about 8.2 kg from 8 kW upwards, so the step from 8 kW to 15 kW costs almost nothing in moving mass. What changes is thermal management and focus travel: the 15 kW head is the only one in the family with a water-cooled nozzle, a 30 bar gas rating and ±72 mm focus travel at F300, which is the configuration thick-wall tube work needs. The 4 kW model is lighter at about 7.5 kg and is gas cooled; the 15 kW model is the only one in the family with a water-cooled nozzle and ±72 mm focus travel at F300.

Applications

High power tube laser cutting: thick-wall round, square and rectangular tube, heavy structural section and profile work, where the wall thickness or the required cutting speed puts the process beyond the reach of a 4 kW or 8 kW head. Also used on mixed lines that run thin and thick wall on the same machine, where one 15 kW head covers the whole range and the water-cooled nozzle allows long duty cycles without stopping for thermal recovery.

FAQ

Why does this model need nozzle water cooling? At 15 kW the radiant and reflected load on the nozzle region is high enough that gas cooling alone drifts over a long run. The water circuit holds the nozzle at a stable temperature, which keeps the standoff, the gas flow pattern and therefore the kerf consistent from the first part of a shift to the last.

What focus travel does it have? -32 to +32 mm with an F200 mm focusing lens and -72 to +72 mm with an F300 mm lens, at 0.01 mm resolution and up to 200 mm/s. The F300 configuration is the one normally used on thick wall, because the longer focal length tolerates more standoff variation.

Is 15 kW the top of the range? Yes. The CAT-3D family is offered at 4 kW, 8 kW and 15 kW, and the BS15K is the highest power class in it.

Does the higher power mean a heavier head? No. The 15 kW head is quoted at approximately 8.2 kg, the same as the 8 kW model, so existing kinematics and robot or gantry payload calculations usually carry over from the 8 kW version.

Disclaimer

Specifications are taken from the manufacturer data current at the time of publication and are subject to change without notice. Focus range depends on the focusing lens actually fitted. Water cooling requires a supply that meets the manufacturer flow and temperature requirements; an inadequate circuit will limit usable duty cycle. Actual cutting performance depends on the laser source, the process gas, the material grade and the machine kinematics. Confirm the configuration and interface against your machine before ordering.

Contact Us

Changsha Soar Laser Equipment Co., Ltd. supplies this cutting head with configuration checks against your laser source, robot or CNC, and your process gas supply. Hotline +86 159-2722-0467, e-mail 859818709@qq.com, www.soar-laser.cn.

Reviews

There are no reviews yet.

Be the first to review “RayTools BS15K CAT-3D 15 kW 3D Smart Laser Cutting Head, International Edition”

Your email address will not be published. Required fields are marked *

中文EN