Description
Product Overview
The BM109-3D was the three-dimensional member of the BM109 auto-focus cutting head family, built for tube work rather than flat sheet. This model is discontinued and no longer in production; the page is retained for reference and spare-part identification.
A tube is not a flat sheet. The head has to follow a contour, reach end faces, and cut holes and angled features that a flat-bed head never sees, which is why the 3D variant existed as its own model rather than as an option on the flat version. It carried automatic focus into that work, so focus was commanded rather than set by hand at each change of wall thickness or diameter. RayTools has replaced the model with the BS04K CAT-3D, the new-generation CAT series smart tube cutting head, which carries a broader set of smart functions. The parameters below are limited to what the original documentation records.
Key Features
- Three-dimensional tube capability: designed for tube contours, end faces and angled features, which is what separated it from the flat-sheet BM109
- Automatic focus: focus driven by command instead of adjusted by hand for each wall thickness or diameter
- Discontinued status: production has ended, so the model is documented here for identification and spares rather than for new machine build
- Replacement path: RayTools names the BS04K CAT-3D, the new-generation CAT series smart tube cutting head, as the successor
Technical Specifications
| Parameter | Specification |
|---|---|
| Status | Discontinued |
| Recommended replacement | BS04K CAT-3D |
Technical Notes
The documentation available for this discontinued model records its status and its replacement only; it publishes no rated power, collimation or focal length, clear aperture, weight, assist-gas pressure or interface figure. Nothing has been filled in by comparison with sister models, because the BM109-3D and the flat-sheet BM109 differ in ways that make such substitution unsafe. If a specific figure is needed for a spare-part decision, send the machine serial number and we will request it from the factory.
Series Comparison
| Discontinued model | Original use | Recommended replacement |
|---|---|---|
| BM109-3D (discontinued) | 3D tube cutting | BS04K CAT-3D |
| BM109 (discontinued) | Flat sheet cutting | BM111 |
| BM111E (discontinued) | EtherCAT flat sheet cutting | BS04K CAT-2D |
Selection Guide
- If the machine cuts tube and needs a 3D head, the replacement path is the BS04K CAT-3D. Do not substitute a flat-sheet head: the BM111 route below applies to flat machines only.
- If the machine cuts flat sheet and the existing head is a BM109, the documented successor is the BM111 auto-focus head, which RayTools describes as having a revised optical configuration and a lighter mechanical design.
- If the machine is EtherCAT controlled, the documented successor is the BS04K CAT-2D, which RayTools describes as carrying a more complete sensing and monitoring set.
- Before ordering any replacement, confirm the machine’s control system, the head mounting interface and the required focal length with us. A successor model is not automatically a drop-in fit.
- This page exists for identification and spare-part purposes. We do not hold this model as new stock, and no delivery commitment is made or implied for it.
Usage Precautions
- Never look into the beam or its specular reflection while the laser is running. Mark the work zone, fit guarding and screening, and wear eyewear rated for the wavelength in use.
- On an installed BM109-3D, inspect the protective window and the nozzle before each production run. A damaged window on a 3D head is easily missed because the working position changes constantly.
- Keep the assist-gas supply clean and dry. Contamination on a 3D head shows up as an inconsistent cut on one side of the contour rather than as an obvious fault.
- Maintenance must be performed by a qualified technician with lockout and tagout applied, and the equipment must remain reliably earthed.
- Spare-part identification: quote the machine serial number and the head model plate together, since the BM109-3D and the flat BM109 share a family name but not their parts.
- For identification or spares, contact Changsha Soar Laser on +86 159 2722 0467 with photographs of the head and its nameplate.
Disclaimer
Specifications on this page are compiled from the manufacturer’s published material and the documentation available to us, and are provided as a selection reference only. The delivered product, the factory inspection report and the manufacturer’s latest specification sheet take precedence; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is not permitted.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. | Hotline +86 159 2722 0467 | www.soar-laser.cn | 859818709@qq.com








Reviews
There are no reviews yet.