Description
Product Overview
The BM109 was the flat-sheet auto-focus cutting head of its generation, aimed at medium and low power cutting where automatic focus removed a manual step from every change of material or thickness. This model is discontinued and no longer in production; the page is retained for reference and spare-part identification.
Its place in the range was straightforward: flat sheet, no three-dimensional contour work, with focus commanded by the control rather than set by hand. That is the difference from the BM109-3D, which shares the family name but was built for tube. RayTools has replaced this model with the BM111 auto-focus laser cutting head, described by the manufacturer as having a more optimised optical configuration and a lighter mechanical design. Only the parameters recorded in the original documentation are reproduced below.
Key Features
- Automatic focus: focus driven by command, removing the manual adjustment previously needed at each material or thickness change
- Flat-sheet geometry: a two-dimensional cutting head, not a 3D contour head, which is the distinction from the BM109-3D
- Medium and low power class: positioned for that band of flat cutting rather than for high-power thick plate
- Discontinued status: production has ended; the page is kept for identification and spares, not for new machine build
- Replacement path: RayTools names the BM111 auto-focus laser cutting head as the successor
Technical Specifications
| Parameter | Specification |
|---|---|
| Status | Discontinued |
| Recommended replacement | BM111 |
Technical Notes
The documentation available for this discontinued model records its status and its replacement only. It publishes no rated power in kW, no collimation or focal length, no clear aperture, no weight, no assist-gas pressure and no interface detail. No figures have been inferred from the BM109-3D or from the BM111 successor, because a head that looks similar in a family photograph is not necessarily the same hardware. For a specific figure, send the machine serial number and we will ask the factory.
Series Comparison
| Discontinued model | Original use | Recommended replacement |
|---|---|---|
| BM109 (discontinued) | Flat sheet cutting | BM111 |
| BM109-3D (discontinued) | 3D tube cutting | BS04K CAT-3D |
Selection Guide
- This head is the flat-sheet one. If the machine cuts tube, the correct route is the BM109-3D replacement, the BS04K CAT-3D, and a flat successor will not do the job.
- For a flat machine replacing a BM109, the documented successor is the BM111 auto-focus head, which RayTools describes as having a more optimised optical configuration and a lighter mechanical design.
- Confirm the machine’s control type and mounting interface before ordering. Automatic focus is commanded by the control, so a successor head must match the signals the machine actually provides.
- If the existing head is still serviceable, spare windows, nozzles and lenses are the practical route; the head itself is no longer produced.
- This page exists for identification and spare-part purposes. We do not hold this model as new stock and make no delivery commitment for it.
Usage Precautions
- Never look into the beam or its specular reflection while the laser is running. Mark the work zone, fit guarding and screening, and wear eyewear rated for the wavelength in use.
- Inspect the protective window and nozzle at each shift change. On a discontinued head the window is the part that fails first and the part that protects everything behind it.
- Check that the focus drive responds smoothly through its full travel; a stiff or noisy drive on an ageing head is a warning, not a nuisance.
- Maintenance must be performed by a qualified technician with lockout and tagout applied, and the equipment must remain reliably earthed.
- Spare-part identification: quote the machine serial number with the head nameplate. The BM109 and the BM109-3D share a family name but not their parts.
- Photograph the nameplate and the head from two angles before calling; that is usually enough for us to confirm the variant on a machine of this age. Changsha Soar Laser, +86 159 2722 0467.
Disclaimer
Specifications on this page are compiled from the manufacturer’s published material and the documentation available to us, and are provided as a selection reference only. The delivered product, the factory inspection report and the manufacturer’s latest specification sheet take precedence; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is not permitted.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. | Hotline +86 159 2722 0467 | www.soar-laser.cn | 859818709@qq.com








Reviews
There are no reviews yet.